TeddyRaspin
Well-Known Member
- Joined
- Dec 6, 2010
- Messages
- 363
- Likes
- 111
Check post 155@TeddyRaspin, I've been reading the wonderful stuff you've found and posted to make drives UHD friendly over the last several weeks. I just received a LG WH16NS40 with 1.03 Rom from Amazon that was manufactured in November 2017. Could you point me to the guide to flash this back as 1.02 or to the ASUS firmware?
Again, thanks so much.
Check post 155
I want to apologize to anyone waiting for the ASUS BW-16D1H-U A201, a sinus infection has resurfaced and I have migraine-level headaches, but I have not forgotten about you. I will give you my A201 firmware within a few days.
// Stefan
I really appreciate your input here. You are a master of your trade.@hart2hart
If you read well my guide, I've linked "clean firmwares" in order to do the job, but if you wish, you can first dump your current firmware, send it to me and I'll prepare a full 100% working 1.02 firmware for you.
Both are fine.Is there a consensus about flashing the LG WH16NS40 drive back to LG's 1.02 FW or flashing it to one (and which one) of the ASUS firmwares?
Guide updated with Windows Method.
The WH16NS60 is a certified UHD drive. Currently, AnyDVD and MakeMKV only work with "UHD Friendly" drives which are not technically UHD drives. Only DeUHD works with the WH16NS60 at this time.Today I bought a LG WH16NS60 with firmware 1.00
Every UHD disc I put in (10 so far from different studios) gives me this message:
Video Blu-ray label: STAR TREK 2009
Media is AACS protected!
Drive supports bus encryption!
Disc wants bus encryption!
couldn't retrieve AGID (bus encryption)!
ERROR processing Blu-ray disc!
I checked the guidelines for drives before I purchased this drive & it stated it worked with 1.00 firmware. I get the same error message on 4k UHD discs from Warner, Fox, Sony, etc.
Ones I've tried include: Bladerunner 2049, The Dark Knight, Dunkirk, Spider-Man Homecoming to name a few.
Is there something I'm doing wrong?
I'm running AnyDVD 8.2.2.2