Still Nowhere near where it should be......
Another fail, another ruined blank. No choice but to go back to v1030 to prevent wasting of media.
This time Grand Turino (Clint Eastwood).
CloneBD seems to be getting worse instead of better, I don't understand. Won't put anything around 2 hours on a 25GB blank. Over and over.
00:00:00.000 | Commence transcoding
00:00:00.000 | Windows version: Windows 7 - 64 bit
00:00:00.000 | CPU : x64, pagesize: 4096, number of logical processors: 8, active processor mask: 00ff
00:00:00.000 | CloneBD version: 1.0.3.4
00:00:00.000 | Source path : G:/
00:00:00.000 | Disc label : GRAN TORINO
00:00:00.000 | Disc hash : 2ed66d85ded2ede80ceafd0e7c764107c21a96d6
00:00:00.000 | Conversion type: disc
00:00:00.000 | temp path : C:/Users/Denny/AppData/Local/Temp/Gran Torino
00:00:00.003 | file system: NTFS
00:00:00.003 | destination : drive
00:00:00.003 | Clip 4, duration: 01:56:34.779, total clip size: 22.55 GB (24214263426) --> then why doesn't it fit??
00:00:00.003 | Total output size (without overhead): 22.55 GB (24214263426)
---------------------------------------
640x360.jpg
01:19:50.666 | 122 - C:/Users/Denny/AppData/Local/Temp/Gran Torino/BDMV/MovieObject.bdmv
01:19:50.666 | 624 - C:/Users/Denny/AppData/Local/Temp/Gran Torino/BDMV/PLAYLIST/00100.mpls
01:19:50.666 | 170 - C:/Users/Denny/AppData/Local/Temp/Gran Torino/BDMV/PLAYLIST/00901.mpls
01:19:50.666 | 24892618752 - C:/Users/Denny/AppData/Local/Temp/Gran Torino/BDMV/STREAM/00004.m2ts
01:19:50.666 | 215040 - C:/Users/Denny/AppData/Local/Temp/Gran Torino/BDMV/STREAM/99001.m2ts
01:19:50.667 | Total size of generated files: 24894983929 bytes ---> and this is supposed to fit on a 25GB blank??
01:19:50.667 | ---------------------------------------
01:19:50.667 | -------------BURN TO DISC-----------
01:19:50.667 | Burn engine start
01:19:50.986 | Burn to drive: H:
01:19:50.986 | Medium: Writable Blu-ray Disc BD-R
01:19:50.986 | Space used: 0
01:19:50.986 | Space available: 25025314816
01:19:50.986 | Setting burn speed 26976
01:19:53.243 | Burn directory "C:\Users\Denny\AppData\Local\Temp\Gran Torino"
01:19:53.347 | Burning initiated
01:57:13.800 | Burn engine done - error: A write-error occured.
08:19:40.487 | Burn error
08:19:40.487 | A write-error occured.
08:19:40.487 | Remove files...
08:19:42.050 | DONE.
~
~
Wrote all the way to the edge of the blank then ran out of space.
Here's the anyDVD read from failed back-up when inserted back into drive after burn failure......
Summary for drive H: (AnyDVD HD 7.5.9.0, BDPHash.bin 15-02-23)
HL-DT-ST BD-REWH14NS40 1.01 N1A12A1K9ED5F34053
Drive (Hardware) Region: 1
Current profile: BD-R
Media is a Blu-ray disc.
Total size: 11826176 sectors (23098 MBytes)
Video Blu-ray label: GRAN TORINO
Media is not AACS protected.
Drive supports bus encryption!
Added speedmenu!
MFR: File 99001.m2ts is too big! Sectors available: 105, Sectors required: 168
ERROR: MFR failed for 99001.m2ts -> C:\Users\Denny\AppData\Local\Temp\AnyDVD_tmp\Any50A5.tmp!
ERROR processing Blu-ray disc!
~
~
If anyDVD reports File99001.mts as being too big after the burn, why doesn't it catch it before the burn?? anyDVD says there's 23.1GB available so a failure is obviously gonna happen.
Even 24892618752 from cloneBD is way too close to 25GB and even I can see that is not gonna work. There appears to be a disconnect between anyDVD and cloneBD at the minimum.
what say you mmdavis? You like to criticize my observations...what do you think? Anybody else have a thought? There it is in black and white......
View attachment GRAN TORINO-fail.zip