List of UHDs currently UN-supported in AnyDVD

testiles

UHD Guru
Thread Starter
Joined
Sep 20, 2011
Messages
6,405
Likes
2,107
The UN-supported UHD List


What are unsupported UHD's?

Unsupported UHD titles generate a pop-up when scanned by AnyDVD that says the following:

---> "Cannot process request at this moment, please try again later" <---

You can also see that message in AnyDVD's Status window.

Typically means a key has not yet been added to the online database for that title version.


If you're using a keyfile (and you should be for UHD's), you will also see a message in the Status window similar to this:

---> "No valid key found in C:\Users\<username>\AppData\Roaming\aacs\keydb.cfg! <---


What's the UN-supported UHD List?


It's a collection of all versions of UHD titles currently unsupported in AnyDVD -- as reported by AnyDVD users.
For each version the following items are listed:
  1. Title
  2. OPD Id (indicates version)
  3. Country of release
  4. Vendor (optional)

How to contribute?

Download the Scanner tool in post #3 and follow the instructions there on its use.

For unsupported titles not already on the List, you will be prompted for the information indicated above.

After scanning all your titles, hit "Prepare Forum Post" and paste the Scanner clipboard contents to a post in this thread.

This will generate a "new-title" submission to add the title to the List.


Note: Once added to the List, you will receive an automatic notification when your title's key shows up in the public keyfile.


Thread rules:



0) Do *NOT* delete any posts you make in this thread (see bulletin below).

1) NO LOGFILES should be posted here! They are not needed.

2) UHD support for a title can happen at any time. So check your UHD often!

3) Promptly submit a final Scanner report to remove your listed title when supported!

4) UHD titles with AACS 2.1 protection (as opposed to AACS 2.0) are not listed as they are not decrypted by AnyDVD at all.

--- Currently known 2.1 titles are:
--- The Patriot
--- Fury
--- Stand by Me
--- Zombieland
--- Charlie's Angels (2000)



Bulletins:


  • ________ IMPORTANT -- Do *NOT* delete any post in this thread!!! ________

  • Report Post Numbers are recorded and deleting causes Forum re-numbering!

  • *(Edit the post instead)*


  • ____________________ **** On submissions **** ____________________

  • Scanner reports are required for all List transactions: both adding a title and updating it !!!

  • NOTE: If submitting a new title using an iso, do *NOT* edit the iso's Label beforehand!
  • (the original Label must be presented)


  • ________________ **** On non-English titles **** ________________

  • Titles must be listed by the English name.
  • Titles cannot include non-English characters. (Examples: ä, ö, ü, ß, é, ç, á, ú, せ)
  • Translators cannot be used on Scanner posts. Renders reports unusable by the automated program.


  • __________________**** New List ordering **** __________________

  • Alphabetizing has been improved by moving leading "The" to the end of a Title



  • __________________**** Key File Monitoring **** __________________

  • A Monitor now checks the public keyfile 24-7 and immediately alerts title posters when their key is available there!



  • _____________________ **** Versions ****_____________________

  • Minimum Scanner version is now 1.1.9.2

  • Minimum AnyDVD version is 8.6.7.2 (best integration with the keyfile & makeMKV)

  • Minimum makeMKV version is 1.16.5



T
 
Last edited:
Code:
Here is the UN-supported UHD List compiled as of Dec 9, 2023 6:00 AM EST (in alphabetical order):


Code:
1) Beau Is Afraid (2023) -- OPD: (Amazon Italy) BD_431a4e22a3b9

2) BloodRayne (2005) -- OPD: (Germany) BD_b834b042daf8  **(new)**

3) Hunt (2022) -- OPD: (Amazon Italy) BD_a9873c8e08dc

4) Kamen Rider Box 2 Disc 5 (1971) -- OPD: (Amazon Japan) BD_30d8f6edc21f

5) Kamen Rider Box 2 Disc 6 (1971) -- OPD: (Amazon Japan) BD_5f7558ddf603

6) Kamen Rider Box 2 Disc 7 (1971) -- OPD: (Amazon Japan) BD_4b070ef13850

7) Kamen Rider Box 2 Disc 8 (1971) -- OPD: (Amazon Japan) BD_90d053d46718

8) Man from Nowhere (2010), The -- OPD: (US) BD_6f62008474d3  **(new)**

9) Ronin (1998) -- OPD: (Germany) BD_fbb388e8b4fd  **(new)**

10) Talk to Me (2023) -- OPD: (Australia) BD_9e1d90f037ec  **(new)**

11) Wailing (2016), The -- OPD: (US) BD_7a70ddfdd61c  **(new)**

12) Whale (2022), The -- OPD: (Amazon Italy) BD_c4a45ff47b04
 
Last edited:
AnyDVD Scanner [1.1.9.2]

Q: What is it?
A: This tool will scan the disc/s in your drive/s to check the status and if needed, will prepare a forum post that you will post to this thread. This will allow @testiles to keep the list of unsupported titles up to date while making the process easier and more automated.

Installation:
o) Download from the attached file on this post.
o) Extract AnyDVD_Scanner.exe to a folder on your machine (Note: You will need 7zip).
o) ISO modes will only appear when Virtual CloneDrive is installed

Note for W7 users (or anyone else getting runtime errors): You may need to install this and reboot:

.NET 8: Runtime Installer

Select
Run desktop apps
Download x64


Instructions for use [NEW USERS MUST READ!!!!!!!!]:

o) If you have not run the scanner before, enter your forum name in the textbox provided EXACTLY as it appears on the forum. This only has to be done once.

WARNING: You should remove all discs from your physical drives before scanning with the ISO modes

o) There are 3 modes within the scanner. The first time you run this new version, Disc mode will be selected by default. On subsequent runs, the last mode you used will be selected. The modes are:


  • Disc Mode
  • ISO Folder mode
  • ISO File mode

NOTE: For ISO Folder and ISO File modes, you will have a ... button that allows you to select a folder or ISO file, respectively. It will remember the last folder/file you selected in the respective mode

o) Once the proper options for your mode have been selected, the Scan button will be enabled and you are ready to scan your disc and/or ISO

o) Once the discs are scanned, you may be asked to provide title information. Enter a human readable title and select the country of release. Optionally, provide the vendor where the disc was purchased. Press Save when all information is entered. Repeat this for each title you've scanned that requires additional information.

NOTE: If title information is required, a pop-up dialog will appear asking you for the information about each title. You can see which fields are required and which are optional when entering the requested information. Title should be mixed case (NOT upper case) and should have spaces between the title words. Optionally include the year if there is more than one version of a title


o) You may continue to scan more Discs/ISOs as needed. Do this BEFORE pressing the Prepare Forum Post button

NOTE: When the previous Discs/ISOs are finished scanning, insert a new Disc/ISO and press the scan button again when they are recognized by the system. Continue this process until you've scanned all your new Discs/ISOs. This is why having an ISO folder of protected ISOs is easier!


o) When you have finished scanning all of your Discs/ISOs, if the Prepare Forum Post button is enabled, click it. The scan report will be copied to your clipboard. Paste the report from your clipboard into a new forum post in this thread and post it.


KeyDB:
The KeyDB file is hosted on the internet and contains CPS Unit Keys that can decrypt a title. This is in addition to AnyDVD's Online Protection Database (OPD). Keeping the KeyDB file updated regularly allows you the best chance to decrypt your UHD's.

To use the KeyDB file, you can click the KeyDB button in the Scanner. This will configure AnyDVD to use the KeyDB file and download/update the keydb.cfg file to the latest version available online. 1, and only 1, backup is made of the previous keydb.cfg file. By default the Scanner will install the keydb.cfg file in your %appdata%\aacs folder (your user profile roaming directory).

OPTIIONS:
POPUP: Selecting/Deselecting this will enable/disable the AnyDVD popup killing function
NOTEPAD: Selecting/Deselecting this will enable/disable opening the Scan Report in Notepad
LOGGING: Selecting/Deselecting this will enable/disable the Scanner log
...: If logging is enabled, you'll see this button and clicking it will open the log with Notepad

NOTE: If you have unsupported titles that you've posted, or own titles that other people have posted, please scan those titles periodically (once a week is sufficient) and post the updated Scan Reports. This will update the list in the first post with updated information.

----------------------------------------------------------------------------------------------------------------------
Changelist:


1.1.9.2
  • Added disc type checking to not even scan non-UHD discs
1.1.9.1
  • Massive rewrite of drive finding logic. NEEDS EXTENSIVE TESTING
  • Changed Supported status to be clear that title is NOT on the Unsupported list and won't be added to report
  • Attempted to fix strange bug on Scanner startup where Disc mode is selected after a username change but isn't really selected

1.1.9.0
  • Fix bus encryption bug caused by new AnyDVD changes
1.1.8.8
  • Bug fix in keydb.cfg reading
1.1.8.7
  • Update to .NET 8 : NOTE you might need a new runtime unless you use the self-contained version
  • Internal date changes
1.1.8.6
  • Missing field in report
1.1.8.5
  • Idiotic internal bug fixed
1.1.8.4
  • Removed KeyDB status from display since it's now always current
  • Internal changes
1.1.8.3
  • Found a bug in update keydb prompt. Now changed to FORCE update of a keydb that is older than 1 day
1.1.8.2
  • Big change for KeyDB.cfg file...it is now REQUIRED to be configured. The Scanner will exit if you decline to have it configure it for you
  • If they KeyDB is not configured and you tell the Scanner to configure it for you, it will default to search all UHD keys for the search method
  • More internal changes
  • There may be bugs - TEST TEST TEST
1.1.8.1
  • Added internal change to capture key search method at time of scan...this is to help us troubleshoot issues
1.1.8.0
  • Added check for non-protected ISO
  • Misc internal changes
1.1.7.8
  • We'll call it the "back to basics" Scanner release
  • All find key functionality has been permanently removed. Will not be re-added
1.1.7.7
  • VERY large changes!
  • Fixed many bugs with key finding
  • Added additional logic to key finding algorithm which will make it faster and slower at the same time. Paradoxes are fun
  • NEEDS LOTS OF TESTING!!!!
1.1.7.6
  • Hopefully fixed crash bug
  • Added MKB version to display
1.1.7.5
  • Many internal fixes and optimizations. Should be slightly faster now (still painfully slow, especially on disc, depending on how many keys it'll try)
1.1.7.4
  • Oops. Broke the keydb button. My bad. A few other misc fixes, as well
1.1.7.3
  • REALLY SUPER MEGA EXPERIMENTAL :)
  • When scanning a brand new disc not already in the list, the Scanner will now check your keydb file for possible keys
  • If keys are found, the Scanner will AUTOMAGICALLY try them until it runs out of keys or finds a working one
  • If it finds a working key, your main keydb.cfg file will be updated with the newly found key and the Scan report will be updated to supported, will not post
  • I can't stress enough how experimental this release is...there is GOING to be bugs here
1.1.7.2
  • Experimental release!
  • Added "Possible Keys" functionality. If you have a newly unsupported title and the Scanner detects possible keys for you to try, it will enable a new "Show Keys" button that will open a text file in Notepad containing instructions and the possible keys to try
  • If your title goes from unsupported to supported, the scanner will update your report and prevent you from submitting the report...because it's supported!
1.1.7.1
  • Several internal bug fixes
1.1.7.0
  • Fixed KeyDB date bug
  • Change title identifier (TI) to Disc Identifier (DiscID)
  • MANY internal changes to aid with helping me help you find title keys faster!
1.1.6.6
  • Actually fixed crash this time
1.1.6.5
  • Attempt to fix crash
1.1.6.4
  • Added the disc identifier back for all statuses
1.1.6.3
  • Minor UI bug fix
1.1.6.2
  • Another keydb bug squashed. On a new keydb configuration, the directory doesn't exist and would crash the Scanner
1.1.6.1
  • Fixed a header issue with the downloaded keydb.cfg
  • Added additional logging around keydb to see if I can track down why it's not setting AnyDVD correctly in some cases
1.1.6.0
  • Added KeyDB AnyDVD configuration. Once you click the KeyDB button, it will configure AnyDVD for the KeyDB file and then download/update it to the latest version
1.1.5.9
  • OOPS...keydb.cfg file was missing a character in the timestamp header I add
  • Now writes to the file that AnyDVD is pointed to, or the %appdata%\aacs folder if AnyDVD is not currently configured
1.1.5.8
  • Added keydb download/update support
1.1.5.7
  • Show status of KeyDB in report
1.1.5.6
  • Internal changes
1.1.5.5
  • Removed Unsupportable and Likely Unsupportable status based on new AnyDVD!!!! Titles will now show simply as Unsupported
  • Lots of internal changes
1.1.5.4
  • Bug fix for invalid media check
1.1.5.3
  • Internal changes
1.1.5.2
  • Fixed bugs with KeyDB detection
1.1.5.1
  • Updated KeyDB support based on feedback from Redfox
  • Internal changes
1.1.5.0
  • Added KeyDB file detection. You must disable KeyDB support in AnyDVD (when it's available in the next release) in order to properly scan discs with the scanner
1.1.4.6
  • Title recommendation further algorithm improvements
1.1.4.5
  • Title recommendation algorithm improvements
1.1.4.4
  • Added check for LibreDrive error which now triggers new scanner error
  • Minor changes
1.1.4.3
  • Added new title hint field to title info dialog for new submissions. It uses an AI title generator to suggest a POSSIBLE title to enter on the screen. It's NOT perfect and is ONLY a suggestion. You still have to think about the title you're entering, and you can't copy it either. This is by design.
1.1.4.2
  • Added new field to the display
1.1.4.1
  • New code uncovered a bug that's been there for quite some time
1.1.4.0
  • Internal updates
1.1.3.8
  • Internal changes around country and vendor lists
1.1.3.7
  • A little code cleanup around forum interaction
  • Minor logging bug fixed
1.1.3.6
  • Internal changes to reporting
1.1.3.5
  • Code cleanup after OPD list loading changes
1.1.3.4
  • Internal change for loading OPD list
1.1.3.3
  • Internal fix
1.1.3.2
  • Small performance fix with the new validate forum name code
1.1.3.1
  • Validate forum name against forum. You MUST enter your forum name in the scanner EXACTLY as it appears on the forum. NO EXCEPTIONS. You will get an error message now if you don't enter it correctly. @testiles you're welcome, man :D
1.1.3.0
  • Permanent fix to forum change issues from earlier
1.1.2.0
  • Forum changes broke the scanner
1.1.1.4
  • Internal bug fix...no user facing changes
1.1.1.3
  • Minor logging bug
1.1.1.2
  • Added label field back to the display
1.1.1.1
  • Fixed empty vendor option not in the vendor list
1.1.1.0
  • Lots of internal fixes
1.1.0.12
  • Very nasty LibreDrive related bug preventing the scanner from functioning for some people. NOTE: If you are not using LibreDrive, the fix for this COULD potentially cause a bug and I've no way of testing that.
1.1.0.11
  • Internal fixes, no user facing changes
1.1.0.10
  • Fixed numerous network related bugs
  • Some internal fixes
1.1.0.9
  • Add tooltips to guide users to do the right things
1.1.0.8
  • Logging changes to clean up logs
1.1.0.7
  • A bunch of bug fixing, logging improvements. Should be a much cleaner release now.
1.1.0.6
  • A bug in the new information/warn/error display code that may have led to a failed attempt to scan a disc/process the log. I HOPE this is fixed but I make no promises here
  • Yet another bug in the display caused by the previous 2 attempts to fix that code. This time any errors wouldn't show up in the display (duplicate title, aacs 2.1 title found, etc etc)
1.1.0.5
  • Cheerio...a crashing bug was found in new title submissions. How fun!
1.1.0.4
  • Oops...minor bug in the log. Sorry about that
  • Added display support for titles in unknown status

1.1.0.3
  • Minor title name display bug
1.1.0.2
  • Another fun bug with scanning in disc mode with an invalid media or some other error
1.1.0.1
  • Small bug with supported titles
1.1.0.0
  • MAJOR REWRITE OF THE SCANNER!
  • The big user facing change is the display formatting to make it cleaner
  • Country display is fixed
  • Title name is now pulled from the unsupported list if it's an existing unsupported variant
  • New Source field added to show if it's a disc or iso that's being scanned
  • Almost all functions of the scanner have been rewritten. It has gone through a round of testing but if there are any bugs, please report them

====================================================================================

[CONTROL]
{
"ReportToken": "(((",
"minScanner": "1.1.9.2",
"minAnyDVD": "8.6.7.2"
}
[/CONTROL]
[FEATURES]
JEQ6k+ipPAp/iRZSZGUG9B6VbI+oVTvnGcbNRNlHysZ+ZnxncJGybN2oXMJPitfm4GbkHq8xAT4CRzD1FwwMxa4neGtrtoWiK+NW1BFiKsjCAz2oveE+PFOAGjZr9leTEQpbLproMcZKWQL5J1K8V3NGbyzY1ZkDvTAY50NwbhfWIYzQ9gMTdm7I+Zr/Ci+6F+Eam2hMuTpXiPpksfLuVg==
[/FEATURES]
 

Attachments

  • AnyDVD Scanner_1.1.9.2.7z
    44.4 MB · Views: 74
  • AnyDVD Scanner_1.1.9.2_NONEMBEDDED.zip
    849.5 KB · Views: 41
Last edited:
One suggestion to this post. If there are variants for unsupported titles that are known to work (For example, my copy of Bohemian Rhapsody from VUDU/Walmart) we should list those, too, until they're all supported just to differentiate and stop the "but mine works" posts. This is great.

SamuriHL,

I see where that might be helpful -- but maybe problematic.

How will we really know when all variants are supported to remove those "supported versions" listings?

For example, I thought all versions of Air Force One, Rampage, and Oceans 8 were supported a loooooong time ago.

So when those entries come along late in the title's life cycle, would we go back and list all the versions that already worked?

Could be a bit of a sticky wicket....


To tell you the truth, if "mine works" but it's a different OPD number than the one on the list, then congratulations but there really is no need to post that comment (lol).

One should only post here if you have a title version that doesn't work!


Also, if you have a title version that doesn't work and it's posted here that it now does, that may be something for its own thread so the developers could take a look.


T
 
Last edited:
Ralph Breaks the Internet Best Buy:
Using OPD BD_b67ce1449b15

Captain America The First Avenger Best Buy:
Using OPD BD_8d1df3d5f438
 
Not working yet: Ralph Breaks the Internet (Amazon Canada) OPD: BD_f834c5e3b339

Also, still waiting for Overlord and A Star is Born [2018]
 
Ralph Breaks the Internet seems to be popular! :=)


You know what's ironic. I finally got Overlord the other day and was surprised when it decrypted.

Almost came here and posted "Mine works" :)


Seems like the Canadian versions of UHD's take a little longer to be covered.


1) Air Force One (Amazon US) -- OPD: BD_5676a441dca1

2) Bohemian Rhapsody (Amazon - I think US?)

3) Overlord (Canada) -- OPD: BD_5e7654c7c14f

4) A Star is Born -- (Canada) OPD: BD_d89de5d05018 || (US) BD_9a291ea4ba51

5) Rampage -- OPD: BD_aa2b37d46559

6) Ocean’s 8 -- OPD: BD_157e25f8b5e3

7) Robin Hood 2018 (Amazon US) -- OPD: BD_a42bc88055fc

8) Schindler's List -- OPD: BD_8f9fece4fd98

9) Ralph Breaks the Internet (Best Buy US) -- OPD: BD_b67ce1449b15 || (Amazon Canada) OPD: BD_f834c5e3b339 (new)

10) Captain America The First Avenger (Best Buy US) -- OPD: BD_8d1df3d5f438 (new)



Titles with unknown support status:

- First Man (Amazon Australia)



T
 
I just received The Little Mermaid and Ralph Breaks the Internet from Disney Movie Club today. Neither decrypted. The OPD for Ralph is the same as the Best Buy US already listed. The OPD for The Little Mermaid is BD_3056e7f09b64.
 
I just received The Little Mermaid and Ralph Breaks the Internet from Disney Movie Club today. Neither decrypted. The OPD for Ralph is the same as the Best Buy US already listed. The OPD for The Little Mermaid is BD_3056e7f09b64.

Sorry to hear that neither is working yet.

But thanks for letting us know, whizbang6012!



1) Air Force One (Amazon US) -- OPD: BD_5676a441dca1

2) Bohemian Rhapsody (Amazon - I think US?)

3) Overlord (Canada) -- OPD: BD_5e7654c7c14f

4) A Star is Born -- (Canada) OPD: BD_d89de5d05018 || (US) BD_9a291ea4ba51

5) Rampage -- OPD: BD_aa2b37d46559

6) Ocean’s 8 -- OPD: BD_157e25f8b5e3

7) Robin Hood 2018 (Amazon US) -- OPD: BD_a42bc88055fc

8) Schindler's List -- OPD: BD_8f9fece4fd98

9) Ralph Breaks the Internet (Best Buy US) -- OPD: BD_b67ce1449b15 || (Amazon Canada) OPD: BD_f834c5e3b339 (new)

10) Captain America The First Avenger (Best Buy US) -- OPD: BD_8d1df3d5f438 (new)

11) The Little Mermaid (Disney Movie Club) -- OPD: BD_3056e7f09b64.


Titles with unknown support status:

- First Man (Amazon Australia)




*********** If no one has First Man Amazon Australia or knows whether it's supported yet, I'll drop that off the list at the end of the month.




T
 
My Ralph Breaks the Internet is OPD
BD_50d007f1eda4

Country: USA
Retailer: V-Stock
 
Last edited:
My Ralph Breaks the Internet is OPD
BD_50d007f1eda4

Thanks mlknez.

What country (and vendor) is that?


I now have a copy of Bohemian Rhapsody from Amazon and it's decrypting.

Since we don't know the OPD number for the one on the list (it was added before we started doing that), I'm going to remove that entry for now.

If someone has a non-supported Bohemian Rhapsody, we can re-post it with the OPD number they supply...



1) Air Force One (Amazon US) -- OPD: BD_5676a441dca1

2) Overlord (Canada) -- OPD: BD_5e7654c7c14f

3) A Star is Born -- (Canada) OPD: BD_d89de5d05018 || (US) BD_9a291ea4ba51

4) Rampage -- OPD: BD_aa2b37d46559

5) Ocean’s 8 -- OPD: BD_157e25f8b5e3

6) Robin Hood 2018 (Amazon US) -- OPD: BD_a42bc88055fc

7) Schindler's List -- OPD: BD_8f9fece4fd98

8) Ralph Breaks the Internet (Best Buy US) -- OPD: BD_b67ce1449b15 || (Amazon Canada) OPD: BD_f834c5e3b339 || BD_50d007f1eda4 (new)

9) Captain America The First Avenger (Best Buy US) -- OPD: BD_8d1df3d5f438 (new)

10) The Little Mermaid (Disney Movie Club) -- OPD: BD_3056e7f09b64 (new)



Titles with unknown support status:

- First Man (Amazon Australia)




*********** If no one has First Man Amazon Australia or knows whether it's supported yet, I'll drop that off the list at the end of the month.



T
 
WOW!
That is one long list Testiles
Looks like Redfox has a lot of work to do
 
Halloween 2018 -- BD_9d81515d1fc9
The Texas Chain Saw Massacre (1974)

Country . Italy

Using OPD BD_23028cdc4d1d

Gotcha!

WOW!
That is one long list Testiles
Looks like Redfox has a lot of work to do

LOL.

Agreed.



1) Air Force One (Amazon US) -- OPD: BD_5676a441dca1

2) Overlord (Canada) -- OPD: BD_5e7654c7c14f

3) A Star is Born -- (Canada) OPD: BD_d89de5d05018 || (US) BD_9a291ea4ba51

4) Rampage -- OPD: BD_aa2b37d46559

5) Ocean’s 8 -- OPD: BD_157e25f8b5e3

6) Robin Hood 2018 (Amazon US) -- OPD: BD_a42bc88055fc

7) Schindler's List -- OPD: BD_8f9fece4fd98

8) Ralph Breaks the Internet (Best Buy US) -- OPD: BD_b67ce1449b15 || (Amazon Canada) OPD: BD_f834c5e3b339 || BD_50d007f1eda4 (new)

9) Captain America The First Avenger (Best Buy US) -- OPD: BD_8d1df3d5f438 (new)

10) The Little Mermaid (Disney Movie Club) -- OPD: BD_3056e7f09b64 (new)

11) Halloween 2018 -- OPD: BD_9d81515d1fc9

12) The Texas Chain Saw Massacre (1974) (Italy) -- OPD: BD_23028cdc4d1d



Titles with unknown support status:

- First Man (Amazon Australia)




*********** If no one has First Man Amazon Australia or knows whether it's supported yet, I'll drop that off the list at the end of the month.



T
 
I just bought Ralph Breaks The Internet (4K/UHD version) from Best Buy last night and went to rip it to ISO with my RedFox AnyDVDHD and essentially got the message indicating that it can't decrypt. The accompanying Blu-ray disc version decrypted fine.

Any indication when RedFox will be releasing the 4K/UHD decryption support for this movie? I heard that MakeMKV already has it available, so the decryption algorithm must be out there. I'm hoping RedFox comes out with an update soon.
 
No indication whatsoever, ther never has been and most likely never will be. For any title. Redfox does not do ETA's
 
I have a few new just-released UHDs that are not supported yet, Captain America First Avenger from Amazon and BBC's Dynasties.

Adding to the list...


1) Air Force One (Amazon US) -- OPD: BD_5676a441dca1

2) Overlord (Canada) -- OPD: BD_5e7654c7c14f

3) A Star is Born -- (Canada) OPD: BD_d89de5d05018 || (US) BD_9a291ea4ba51

4) Rampage -- OPD: BD_aa2b37d46559

5) Ocean’s 8 -- OPD: BD_157e25f8b5e3

6) Robin Hood 2018 (Amazon US) -- OPD: BD_a42bc88055fc

7) Schindler's List -- OPD: BD_8f9fece4fd98

8) Ralph Breaks the Internet (Best Buy US) -- OPD: BD_b67ce1449b15 || (Amazon Canada) OPD: BD_f834c5e3b339 || BD_50d007f1eda4 (new)

9) Captain America The First Avenger (Best Buy US) -- OPD: BD_8d1df3d5f438 || (Amazon US) -- OPD: BD_5f319d658022 (new)

10) The Little Mermaid (Disney Movie Club) -- OPD: BD_3056e7f09b64 (new)

11) Halloween 2018 -- OPD: BD_9d81515d1fc9 (new)

12) The Texas Chain Saw Massacre (1974) (Italy) -- OPD: BD_23028cdc4d1d (new)

13) BBC's Dynasties Disc 1 (Amazon US) -- OPD: BD_f888f9550ecf (new)

________________ Disc 2 (Amazon US) -- OPD BD_22ae0dd7c908 (new)





T
 
You can rip them to protected iso so that when they're supported you can mount it in virtual clonedrive and open it with clonebd. Then you can just mount the iso once in a while to check if it's supported.

Sent from my Pixel XL using Tapatalk
 
New version of my AnyDVD OPD parser is uploaded in post 2. This should make everyone happy. Sample output direct from the tool:

RALPH_BREAKS_THE_INTERNET -- OPD: BD_b67ce1449b15
CAPTAIN_AMERICA_FIRST_AVENGER -- OPD: BD_8d1df3d5f438

:D
 
Back
Top