Webslinger
Retired Moderator
- Joined
- Jan 28, 2007
- Messages
- 27,343
- Likes
- 5
But, I am having problems with the burning of the files onto the blank media -literally all backups burn with stuttering and halting.
Playback produces stutter?
Or the burn process starts and stops?
For playback . . .
1. Update your burner's firmware (if available)
http://forum.slysoft.com/showthread.php?t=18731
2. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden (not valueline), Verbatim Datalife Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
If you use poor quality blank media, then you should expect problems.
For +R DL blank media, use Verbatim made in Singapore or MAM-A 8x +R DL.
3. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x instead of 16x; an 8x burn speed on 16x rated media wouldn't be a bad idea either)
For +R DL blank media, try a 4x burn speed. Do not burn at maximum.
4. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom" before burning:
http://forum.slysoft.com/showthread.php?t=476 (step 3)
5. Avoid sticker labels (they tend to cause problems)
6. Try setting a custom size of 4300 in Clonedvd (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.
7. Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Insert the problematic backup disc, select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your backup is bad (which is the most likely case), your optical drive may be slowly dying, or your optical drive simply doesn't like the disc (or your choice of blank media)--even if the disc looks fine.
Bad burn quality is notorious around the end of discs (see step 6)
and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore or MAM-A 8x +R DL, and change the booktype to "dvd-rom")
Also, check the preview screen in Clonedvd to ensure you're backing up the proper title.
read http://forum.slysoft.com/showthread.php?t=476 fully please