Media is AACS protected!
Drive supports bus encryption!
AACS MKB version 63
Removed AACS copy protection!
Bad sector protection not found.
このようなメッセージがでているので、解除できているようですが、BDMV,DVD作成ソフトに
読み込ませると、最初の1分くらいで各00001.m2tsが編集できません。
各画像を読み込ませて、チャプターやCMカットなどができるのですが、1分くらいで、その先の
画像が出てきません。どうしても使う分には変換ソフトを使って、MP4とかに画質を落として、
何十時間もかけて編集して、それを読み込ませるしかありません。
バージョンが63以前(いつからか忘れたが40数頃までは正常に働いていた。)
作成ソフトはm2ts,tsともに対応していて、Codecを入れればあらゆる形式に対応します。
正常にBDAVが解除してるのに読めなくなった。
これは、表面上プロテクトは解除されているが、中身のファイルが完全に解除されて
いないのでは、ないのでしょうか。
地上波は滅多に試していませんが、スカパーのコピーワンスの作品に症状が出ています。
ログ地上波のコピー10で編集したログ(AnyDVD_8.7.1.0_Info_G_DVD_VIDEO_RECORDER.ziplog)と、
スカパーをとってるレコーダーのログ
(AnyDVD_8.7.1.0_Info_G_TSB0003.ziplog)のディスクでは、どうやら、
TSB0003のスカパーのコピーワンスの番組だけ症状が出ているようです。
TSB0003のレコーダの方が古い型式です。地上波は10分とって、
BDREに焼いて確認したところ問題ありませんでした。
同画質、同条件で行いました(地上波なのでコピー10)。
TSB0003の方のログはスカパーをとったものの、ログです。
改善できるようによろしくお願いします。他の動画編集機能のある
オーサリングソフトでも同じことが起きますので、オーサリングソフトの
問題ではないと思われます。よろしくお願いします。
Drive supports bus encryption!
AACS MKB version 63
Removed AACS copy protection!
Bad sector protection not found.
このようなメッセージがでているので、解除できているようですが、BDMV,DVD作成ソフトに
読み込ませると、最初の1分くらいで各00001.m2tsが編集できません。
各画像を読み込ませて、チャプターやCMカットなどができるのですが、1分くらいで、その先の
画像が出てきません。どうしても使う分には変換ソフトを使って、MP4とかに画質を落として、
何十時間もかけて編集して、それを読み込ませるしかありません。
バージョンが63以前(いつからか忘れたが40数頃までは正常に働いていた。)
作成ソフトはm2ts,tsともに対応していて、Codecを入れればあらゆる形式に対応します。
正常にBDAVが解除してるのに読めなくなった。
これは、表面上プロテクトは解除されているが、中身のファイルが完全に解除されて
いないのでは、ないのでしょうか。
地上波は滅多に試していませんが、スカパーのコピーワンスの作品に症状が出ています。
ログ地上波のコピー10で編集したログ(AnyDVD_8.7.1.0_Info_G_DVD_VIDEO_RECORDER.ziplog)と、
スカパーをとってるレコーダーのログ
(AnyDVD_8.7.1.0_Info_G_TSB0003.ziplog)のディスクでは、どうやら、
TSB0003のスカパーのコピーワンスの番組だけ症状が出ているようです。
TSB0003のレコーダの方が古い型式です。地上波は10分とって、
BDREに焼いて確認したところ問題ありませんでした。
同画質、同条件で行いました(地上波なのでコピー10)。
TSB0003の方のログはスカパーをとったものの、ログです。
改善できるようによろしくお願いします。他の動画編集機能のある
オーサリングソフトでも同じことが起きますので、オーサリングソフトの
問題ではないと思われます。よろしくお願いします。
I am getting this message, so it seems to be unlocked, but when I load it into BDMV,DVD creation software,
I cannot edit each 00001.m2ts in the first minute or so. I can load each image, and then I can edit chapters, cut commercials, etc.
I can load each image, but after a minute or so, the images beyond that do not appear.
If I really want to use it, I have to use conversion software, reduce the quality to MP4 or something, and spend dozens of hours editing it,
The only way is to load it. The version was 63 or earlier (I don't remember when, but it worked fine until around 40s).
The creation software supports both m2ts and ts, and if you put in Codec, it will support any format.
I can no longer read BDAV even though it is deactivated normally. This means that the protection is removed on surface, but the file inside is not completely removed.
I have rarely tried terrestrial. I rarely try terrestrial, but the symptom is present on SKY PerfecTV copy once works. Log terrestrial copy once edited with 10 (AnyDVD_8.7.1.0_Info_G_DVD_VIDEO_RECORDER.ziplog) and,
In the log (AnyDVD_8.7.1.0_Info_G_TSB0003.ziplog) of the recorder that is taking SKY PerfecTV, it seems that only the SKY PerfecTV copy once programs on TSB0003 are showing the symptoms.
The TSB0003 recorder is an older model. I took 10 minutes of terrestrial wave, burned it to BDRE, and checked it, and there was no problem. The same quality and conditions were used (terrestrial, so copy 10).
The log for TSB0003 is the log of the one that took the SKY PerfecTV.
Please help us to improve it. The same thing happens with other authoring software with video editing functions.
So I don't think it is a problem with the authoring software.
Thank you in advance.
Attachments
Last edited: