A1 Scanner error at 56% of We Own the Night!

Discussion in 'AnyDVD HD (DVD issues)' started by JRude, Feb 15, 2008.

Thread Status:
Not open for further replies.
  1. JRude

    JRude Guest

    I am Having same issue as another on DVD We Own the Night, Sony title, Region 1.
    Any DVD A1 Ripper stops at 56% in vob 5 of main title copying to hard drive.
    Neither Nero, DVD Shrink nor DVD Decrypter can read file past that point. Sony
    disc DOES have PC_clickme as an autorun but I disabled it by holding Control Key
    while inserting disc. It does NOT appear Any DVD defeats PC_clickme as it
    attempted to run while on Any DVD version 6.3.1.5., running in Default. I have
    gotten a SECOND DVD getting same error. There are no scratches or visible
    imperfections.

    Is this a new protection or a bad disc run? Stopping at same point indicates not
    a random error.
    Please find log file attached.
    I have no other vid processors on the PC. This is the first incidence of a disc
    I cannot workaround in some manner to backup!
    This error happens on either of the two drives I have installed on a Sony VAIO
    XP Home SP2. email also sent to Support with same info.
     

    Attached Files:

    Last edited by a moderator: Feb 15, 2008
  2. JRude

    JRude Guest

    Subtitle showing as copy to HD ends

    As a copied vob ends there is a short subtitle display right before the copy ends incompleted. I did NOT have the player set to display subtitles. This MAY be a cause of the 56% stop error?
     
  3. Webslinger

    Webslinger Retired Moderator

    click http://forum.slysoft.com/showpost.php?p=87585&postcount=4 and read fully please

    Anydvd does, in fact, block that file from running provided you had Anydvd running before inserting any disc with that file. If you inserted a disc with that file on it in the past without Anydvd running first, then your system registry has likely been hijacked (I would check your system registry for instances of pc_clickme). Quite simply, no file can run automatically upon inserting a dvd-video disc without autorun being enabled, and Anydvd blocks autorun provided PC-Friendly is enabled in Anydvd.


    There's nothing terribly special on this disc. Just RCE and CSS.


    Download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged.

    Another possibility is that pc_clickme is causing problems on your system.
     
    Last edited: Feb 15, 2008
  4. Webslinger

    Webslinger Retired Moderator

    No. Not at all
     
  5. JRude

    JRude Guest

    Errored Test With Nero CDSpeed

    At 56.4% The disc errored in Nero Speed.
    Benchmark Test; Error! L-EC UNCORRECTABLE ERROR (031105)
    ScanDisc; At 56.4% Shows disc is bad, test drops to almost zero level speed
    From site;
    http://www.devhardware.com/forums/storage-devices-80/ide-ata33-cable-a-liteon-dvd-cd-rw-2780

    9.html
    <The DVD had copy protection that threw an error during the test.>
    I have no errors in either drive with other discs. The DVD We Own the Night plays fine on PC and standalone players. There is SOMETHING there that is defeating the copy to hard drive by not allowing read. My Registry has no entries foe PC_clickme.exe or any of it's associated entries. I see by Googling that others are having problems with this title also. An unrecognized false vob type info? I do not know. But I think a deeper check is required by somebody with the tools to do so. Thank you.
     
  6. Webslinger

    Webslinger Retired Moderator

    That's fairly meaningless.
    Just because a disc plays fine doesn't mean it is fine.

    Then there's likely a large quantity of bad original discs that have been released.

    No.

    click http://forum.slysoft.com/showpost.php?p=89169&postcount=2 and click http://forum.slysoft.com/showpost.php?p=89176&postcount=3

    Two people here have had no problems with this disc.
     
    Last edited: Feb 15, 2008
  7. Fred0149

    Fred0149 Well-Known Member

    I had no problems backing up this disc,with ANYDVD6313, and Clone 2915. I did not try to rip, I went straight disc to disc.
     
  8. JRude

    JRude Guest

    Two

    I am happy two have been able to backup this disc. I am concerned with my not being able to back it up. Increasingly new releases have issues and it does no service to tell me it is primarily due to bad discs. It is done by on the edge encoding of newer discs. Why is this such a problem to admit? I do not need semi adversarial remarks nor illusions that all is OK. It is NOT. There are protections on these discs that need to be adressed.
     
  9. Webslinger

    Webslinger Retired Moderator

    "On the edge" what? No. What you're writing is complete nonsense.

    Your discs are bad, or your drives are dying. Period
    Clean your discs, reduce your read speed, replace your discs, or get new drives.

    The issue you're having has nothing to do with Anydvd. Fred0149 also had no problems, so that makes three people. If there were an issue with this disc and Anydvd no one would be able to back it up. There is no special protection on this disc. It just has RCE and CSS. If you know what you're doing, PC_clickme isn't an issue either.

    Bad original discs are becoming more common.
     
    Last edited: Feb 15, 2008
  10. JRude

    JRude Guest

    "Bad Discs"

    You know and I know that the industry is trying every avenue in a shotgun approach to encoding so PC's cannot read discs. If only a few PC's cant read, so be it. It only happens with THIS disc. No others. My drives are not dying. To categorize all errors as ''bad discs'' is ignoring the reality. If ''bad discs'' means anything Any DVD can't read on some platforms is ''bad'' I guess that's it. Thank you for your time. J. R.
     
  11. DrinkLyeAndDie

    DrinkLyeAndDie Retired Moderator

    What about the Industry simply wanting to make more money and by contracting out the disc manufacturing at a cheaper price using cheaper materials the chances of bad discs goes up. Ignoring the fact that large quantities of bad discs are being sold is simply silly.

    Simply using logic could you explain to me how other people have copied this disc w/o problems with AnyDVD while you can't if this is some new protection? Do you understand how that would make no sense?
     
    Last edited: Feb 16, 2008
  12. Webslinger

    Webslinger Retired Moderator

    You are mistaken. You are not the first person to encounter read errors from poorly pressed discs. In fact, CRC, FileIO3, and TCSectorReader are the most common errors on the forum; and they all basically involve the same thing: bad original discs. This isn't something new. When there's no structural protection on the original discs (and there is no structural protection on this disc), the problem (unless there's some sort of driver conflict) is a bad original disc or poor reader.

    There is no conspiracy theory here. You are not experiencing anything new; thousands of people have encountered bad original discs (and/or poorly reading drives).
     
    Last edited: Feb 16, 2008
  13. DAB Badboy

    DAB Badboy Well-Known Member

    That sounds to me like a good argument for having Any DVD memory resident (load at boot up) - for those who don't already do so ...
     
  14. DAB Badboy

    DAB Badboy Well-Known Member

    I must admit it sounds to me like there is a machine somewhere in the US knocking out a bad batch of this particular disc :(

    Sign of the times I guess .. :(
     
  15. Webslinger

    Webslinger Retired Moderator

    Yep. Its's an easy way to help ensure you don't get the nasty alpha-disc rootkit on your system.
     
  16. RedFox 1

    RedFox 1 Super Moderator

    Slysoft does its best to accomodate all of their customers, the fact remains that the industry that makes these discs are putting out crap, bad stampings and other things that Slysoft has no control over, if the disc can be backedup here, and you can't do it then the problem is with the disc or your computer . Enough said.:policeman:
     
Thread Status:
Not open for further replies.