camperxl
Well-Known Member
Thread Starter
- Joined
- Jun 13, 2007
- Messages
- 88
- Likes
- 7
He-Man and the Masters of the Universe Season 2 Volume 2, Disc 01 only fails to rip to ISO (all others rip perfectly). Gets to 99% then fails. Error message displayed is "Clone 1 TCE". I emailed support at Elby thinking it was a Clone DVD issue and Peter Nord made several suggestions none of which changed anything. Ultimately he sided on the thought it was an AnyDVD issue and to wait for an update to 6.1.7.0. I saw the beta posted and tried it, but still having the same issues. I swapped out the disc set, for an unrelated issue and have the same issue with the new set as I did on the old set. I've also tried this on different drives. IFOs can be accessed here: http://home.comcast.net/~camperxl/heman_s2v2d1.zip
Before posting about your problem, please do some of us a favour so that we can help you better.
Follow the steps, and answer the following questions in your post (especially 8 and 9):
1) Ensure you're using the lastest version of Anydvd. Check the sticky at the top of this forum.
done. 6.1.7.1 Beta being used.
2) Remove packet writing software from your system (including Directcd, Incd, DragtoDisc, Drive Letter Access, CyberLink InstantBurn, etc.)
N/A - none of these are installed or being used
3) State a)the specific version of Anydvd you're using, b)the specific version(s) of the burning application(s) you are using (and stating "latest versions" isn't sufficient information; use full version numbers), and c)the specific version(s) of whatever other burning application(s) you have installed on your system.
a)6.1.7.1
b) N/A
c) N/A (am using Clone DVD 2.9.1.2 to rip disc)
4) Specify the a)full title, b)region code, c) country, and d) release date of the disc that you're experiencing issues with.
a) He-Man and the Masters of the Universe, Season 2, Volume 2, Disc 01
b) R1
c) USA
d) September 19, 2006
5) Specify a)the brand and b)model number of your optical reader and writer with c)firmware versions for these optical drives. d) Let us know what operating system (version number and service pack, if applicable) you're using as well. e) Check to see if there's an updated firmware version for your burner and your reader.
a) TSSTcorp DVD+-RW
b) TS-L632D
c) DE03
d) Vista Premium (32-bit)
e) yes - DE04. Will install, but doubt it will make any difference since it's not being used
6) What blank media are you using? Specify a) brand name b)type (-R, +R, -RW, +RW, RAM, DL, etc.) c)media code, d) capacity/size, e) batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and f)country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).
N/A - ripping to ISO
If you don't know how to obtain media codes, you may find the following programs useful:
http://dvd.identifier.cdfreaks.com and http://www.dvdinfopro.com/
7) At what speed are you burning your blank media?
N/A - ripping to ISO
8 ) Click the red fox icon in your system tray. Select "status" on the left hand side of your screen. With the problematic disc inserted in your computer, click the appropriate drive tab letter (the drive containing the disc) in Anydvd. In the window below the drive letter, copy and paste the information Anydvd gives you into your post asking for help. If you made a backup, do this step for both the original disc and the backup, please.
Summary for drive E: (AnyDVD 6.1.7.1)
TSSTCORP DVD+-RW TS-L632D DE03 DE
Drive (Hardware) Region: 1
Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 1992720 sectors (3892 MBytes)
Total size: 3971568 sectors (7756 MBytes)
Video DVD (or CD) label: HEMAN_S2V2_D1
Media is CSS protected!
Video Standard: NTSC
Media is locked to region(s): 1!
RCE protection not found.
DVD structure appears to be correct.
Structural copy protection not found.
Autorun not found on Video DVD.
Bad sector protection not found.
Emulating RPC-2 drive with region 1!
9 ) State the full a)error message(s) you encountered, b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s).
a) Clone TCE 1
b) AnyDVD 6.1.7.1 and Clone DVD 2.9.1.2
c) Ripping was going on like normal - when ripping reaches 99%, uh-oh sound plays and the error appears
10) Before posting, please use the "search" function on these boards. Many answers are available already.
Found nothing
11) Lastly, check for power issues in the area where you burn (as Clams Canino mentions):
visit http://forum.slysoft.com/showthread.php?t=1808
Okay...
Before posting about your problem, please do some of us a favour so that we can help you better.
Follow the steps, and answer the following questions in your post (especially 8 and 9):
1) Ensure you're using the lastest version of Anydvd. Check the sticky at the top of this forum.
done. 6.1.7.1 Beta being used.
2) Remove packet writing software from your system (including Directcd, Incd, DragtoDisc, Drive Letter Access, CyberLink InstantBurn, etc.)
N/A - none of these are installed or being used
3) State a)the specific version of Anydvd you're using, b)the specific version(s) of the burning application(s) you are using (and stating "latest versions" isn't sufficient information; use full version numbers), and c)the specific version(s) of whatever other burning application(s) you have installed on your system.
a)6.1.7.1
b) N/A
c) N/A (am using Clone DVD 2.9.1.2 to rip disc)
4) Specify the a)full title, b)region code, c) country, and d) release date of the disc that you're experiencing issues with.
a) He-Man and the Masters of the Universe, Season 2, Volume 2, Disc 01
b) R1
c) USA
d) September 19, 2006
5) Specify a)the brand and b)model number of your optical reader and writer with c)firmware versions for these optical drives. d) Let us know what operating system (version number and service pack, if applicable) you're using as well. e) Check to see if there's an updated firmware version for your burner and your reader.
a) TSSTcorp DVD+-RW
b) TS-L632D
c) DE03
d) Vista Premium (32-bit)
e) yes - DE04. Will install, but doubt it will make any difference since it's not being used
6) What blank media are you using? Specify a) brand name b)type (-R, +R, -RW, +RW, RAM, DL, etc.) c)media code, d) capacity/size, e) batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and f)country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).
N/A - ripping to ISO
If you don't know how to obtain media codes, you may find the following programs useful:
http://dvd.identifier.cdfreaks.com and http://www.dvdinfopro.com/
7) At what speed are you burning your blank media?
N/A - ripping to ISO
8 ) Click the red fox icon in your system tray. Select "status" on the left hand side of your screen. With the problematic disc inserted in your computer, click the appropriate drive tab letter (the drive containing the disc) in Anydvd. In the window below the drive letter, copy and paste the information Anydvd gives you into your post asking for help. If you made a backup, do this step for both the original disc and the backup, please.
Summary for drive E: (AnyDVD 6.1.7.1)
TSSTCORP DVD+-RW TS-L632D DE03 DE
Drive (Hardware) Region: 1
Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 1992720 sectors (3892 MBytes)
Total size: 3971568 sectors (7756 MBytes)
Video DVD (or CD) label: HEMAN_S2V2_D1
Media is CSS protected!
Video Standard: NTSC
Media is locked to region(s): 1!
RCE protection not found.
DVD structure appears to be correct.
Structural copy protection not found.
Autorun not found on Video DVD.
Bad sector protection not found.
Emulating RPC-2 drive with region 1!
9 ) State the full a)error message(s) you encountered, b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s).
a) Clone TCE 1
b) AnyDVD 6.1.7.1 and Clone DVD 2.9.1.2
c) Ripping was going on like normal - when ripping reaches 99%, uh-oh sound plays and the error appears
10) Before posting, please use the "search" function on these boards. Many answers are available already.
Found nothing
11) Lastly, check for power issues in the area where you burn (as Clams Canino mentions):
visit http://forum.slysoft.com/showthread.php?t=1808
Okay...
Last edited: