He-Man S2 V2 - Rip still fails with 6.1.7.1 Beta

Discussion in 'AnyDVD HD (DVD issues)' started by camperxl, Sep 6, 2007.

  1. camperxl

    camperxl Well-Known Member

    He-Man and the Masters of the Universe Season 2 Volume 2, Disc 01 only fails to rip to ISO (all others rip perfectly). Gets to 99% then fails. Error message displayed is "Clone 1 TCE". I emailed support at Elby thinking it was a Clone DVD issue and Peter Nord made several suggestions none of which changed anything. Ultimately he sided on the thought it was an AnyDVD issue and to wait for an update to 6.1.7.0. I saw the beta posted and tried it, but still having the same issues. I swapped out the disc set, for an unrelated issue and have the same issue with the new set as I did on the old set. I've also tried this on different drives. IFOs can be accessed here: http://home.comcast.net/~camperxl/heman_s2v2d1.zip


    Before posting about your problem, please do some of us a favour so that we can help you better.
    Follow the steps, and answer the following questions in your post (especially 8 and 9):

    1) Ensure you're using the lastest version of Anydvd. Check the sticky at the top of this forum.
    done. 6.1.7.1 Beta being used.

    2) Remove packet writing software from your system (including Directcd, Incd, DragtoDisc, Drive Letter Access, CyberLink InstantBurn, etc.)
    N/A - none of these are installed or being used


    3) State a)the specific version of Anydvd you're using, b)the specific version(s) of the burning application(s) you are using (and stating "latest versions" isn't sufficient information; use full version numbers), and c)the specific version(s) of whatever other burning application(s) you have installed on your system.
    a)6.1.7.1
    b) N/A
    c) N/A (am using Clone DVD 2.9.1.2 to rip disc)


    4) Specify the a)full title, b)region code, c) country, and d) release date of the disc that you're experiencing issues with.
    a) He-Man and the Masters of the Universe, Season 2, Volume 2, Disc 01
    b) R1
    c) USA
    d) September 19, 2006


    5) Specify a)the brand and b)model number of your optical reader and writer with c)firmware versions for these optical drives. d) Let us know what operating system (version number and service pack, if applicable) you're using as well. e) Check to see if there's an updated firmware version for your burner and your reader.
    a) TSSTcorp DVD+-RW
    b) TS-L632D
    c) DE03
    d) Vista Premium (32-bit)
    e) yes - DE04. Will install, but doubt it will make any difference since it's not being used



    6) What blank media are you using? Specify a) brand name b)type (-R, +R, -RW, +RW, RAM, DL, etc.) c)media code, d) capacity/size, e) batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and f)country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).
    N/A - ripping to ISO

    If you don't know how to obtain media codes, you may find the following programs useful:

    http://dvd.identifier.cdfreaks.com and http://www.dvdinfopro.com/

    7) At what speed are you burning your blank media?
    N/A - ripping to ISO

    8 ) Click the red fox icon in your system tray. Select "status" on the left hand side of your screen. With the problematic disc inserted in your computer, click the appropriate drive tab letter (the drive containing the disc) in Anydvd. In the window below the drive letter, copy and paste the information Anydvd gives you into your post asking for help. If you made a backup, do this step for both the original disc and the backup, please.

    Summary for drive E: (AnyDVD 6.1.7.1)
    TSSTCORP DVD+-RW TS-L632D DE03 DE
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 1992720 sectors (3892 MBytes)
    Total size: 3971568 sectors (7756 MBytes)

    Video DVD (or CD) label: HEMAN_S2V2_D1
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    DVD structure appears to be correct.
    Structural copy protection not found.
    Autorun not found on Video DVD.
    Bad sector protection not found.
    Emulating RPC-2 drive with region 1!


    9 ) State the full a)error message(s) you encountered, b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s).
    a) Clone TCE 1
    b) AnyDVD 6.1.7.1 and Clone DVD 2.9.1.2
    c) Ripping was going on like normal - when ripping reaches 99%, uh-oh sound plays and the error appears


    10) Before posting, please use the "search" function on these boards. Many answers are available already.
    Found nothing

    11) Lastly, check for power issues in the area where you burn (as Clams Canino mentions):
    visit http://forum.slysoft.com/showthread.php?t=1808
    Okay...
     
    Last edited: Sep 6, 2007
  2. Webslinger

    Webslinger Retired Moderator




    Well, this disc doesn't have anything special on it in terms of protection. There's so little protection, Dvd Shrink could handle it without Anydvd.

    1. Can you check the log for "Warning - remuxing forced" messages?

    2. Click the red fox icon on your toolbar. Navigate to "Css Key Archive". Please ensure "Use CSS Key archive" is unchecked.
    Or Better still, click the "default" button in Anydvd. Then click "ok".

    3. Click this link: http://forum.slysoft.com/showthread.php?t=4028 (go through points 1, 2 and 3)

    4. Download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).

    Given the rest of the discs in the series worked--and given that there's no protection on this disc other than CSS, I suspect you have a bad original disc even if it plays fine. But go though the steps I outlined.
     
    Last edited: Sep 6, 2007
  3. camperxl

    camperxl Well-Known Member

    Tried your suggestions - no difference. Details below.

    1. Can you check the log for "Warning - remuxing forced" messages?
    Although it does not say Warning - if I right click in the log area and choose 'Debugging Information' I do see lots of "remuxing forced: TC 7 1 01590bee" messages. What does this mean?

    2. Click the red fox icon on your toolbar. Navigate to "Css Key Archive". Please ensure "Use CSS Key archive" is unchecked.
    Or Better still, click the "default" button in Anydvd. Then click "ok".
    Verified - unchecked

    3. Click this link: http://forum.slysoft.com/showthread.php?t=4028 (go through points 1, 2 and 3)
    Point 1 - Not using either of these programs. Did disable my AVG antivirus just to be safe though.
    Point 2 - Done. No difference.
    Point 3 - N/A - not writing to any media. Ripping to ISO.


    4. Download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
    Done - Disc scanned as 100% Good with Nero cd-dvd Speed 4.7.7.3. Would have been surprised if disc scanned bad because as stated before I had already exchanged this box set for an identical replacement, for an unrelated reason, and got identical error on both sets on 2 different computers each. Same error on 2 different drives, both brand new; therefore would doubt dying slowly theory.

    Given the rest of the discs in the series worked--and given that there's no protection on this disc other than CSS, I suspect you have a bad original disc even if it plays fine. But go though the steps I outlined.
    Done - refer to above for thoughts on bad media theory.
     
  4. Webslinger

    Webslinger Retired Moderator

    Well, if memory serves, the Clone 1 error usually means that Clonedvd can't compress--perhaps due to faulty css key decryption. But I haven't seen or heard that type of thing happening in ages. That's why I had you check to see if the css key archive was enabled in Anydvd. Another possibility for that happening was due to the use of cracks. Given that you're writing to Elby, I've pretty much ruled that out.


    Yeah, it's not actually rare, however, for a bunch of poorly manufacturered/bad pressings of a disc to be released. I know someone who returned a dvd to a store four times. Finally, he went to another store and bought one that worked.


    1. Check to ensure you're using standard Microsoft ide busmaster drivers provided you're ripping with an ide optical drive.

    2. a) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)

    b) Go to Tools > Filter Driver Load Order. Click "Clipboard". Then paste the information you pasted into your clipboard into your next post (ctrl-v).

    I would like to check your filters.

    3. Does the disc play fine with Anydvd enabled? Does the video look messed up at all?

    4. Please also send the ifos to Slysoft: click http://forum.slysoft.com/showthread.php?t=330. I know you posted a link, but it's possible that Slysoft needs them.

    5. I notice you're using Vista.

    a) How much free hard drive space do have left?
    b) Disable User Account Control (I doubt this is the problem since you created other .isos, but might as well check) and rip
    c) I wonder if Clonedvd is having problems creating the .iso due to some weird administrative rights issue (Again, I doubt this is the issue, but I have to ask) . . . You do have full access to your hard drive, right?

    6. Right click the red fox icon on your toolbar. Select "rip video-dvd to hard disk". Select your source and destination. Click "Copy dvd". Let us know if you get any error messages. Please provide full error messages. Thank you.
     
    Last edited: Sep 6, 2007
  5. James

    James Redfox Development Team Staff Member

    This means, that AnyDVD did not decrypt the movie correctly.

    Make sure that:

    1.) AnyDVD is running on system start
    2.) AnyDVD is running when you insert the disc
    3.) Try to disable the CSS archive, if it is enabled

    EDIT:
    4.) If you use a cracked / keygenned version of AnyDVD: Don't. Modifying the program in any way might affect its ability to decrypt CSS.

    EDIT2:
    To check AnyDVD's CSS decryption: *Watch* the movie on the PC while AnyDVD is running. If you see a distorted picture, CSS was not decrypted correctly.
     
    Last edited: Sep 6, 2007
  6. camperxl

    camperxl Well-Known Member

    Well, if memory serves, the Clone 1 error usually means that Clonedvd can't compress--perhaps due to faulty css key decryption. But I haven't seen or heard that type of thing happening in ages. That's why I had you check to see if the css key archive was enabled in Anydvd. Another possibility for that happening was due to the use of cracks. Given that you're writing to Elby, I've pretty much ruled that out.
    Yes - you can completely rule out the use of any cracks or bootleg versions of Slysoft product. Everything absolutely 100% legit. Paid versions of all.

    1. Check to ensure you're using standard Microsoft ide busmaster drivers provided you're ripping with an ide optical drive.
    Not sure how to do this - I installed Vista fresh and have not added anything special in the way of busmastering drivers that I recall explicitly doing so I'm assuming I'm using Microsoft ones.

    2. a) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    Done. A rip using this program worked well. I have an ISO of Disc 1 now that plays. Here are the log results from that rip process.

    I 08:36:39 Operation Started!
    I 08:36:39 Source Device: [1:0:0] PHILIPS DVD+-RW DVD8801 AD21 (D:) (ATA)
    I 08:36:39 Source Media Type: DVD-ROM
    I 08:36:39 Source Media Sectors: 3,971,568 (Track Path: OTP - L0: 1,992,720 - L1: 1,978,848)
    I 08:36:39 Source Media Volume Identifier: HEMAN_S2V2_D1
    I 08:36:39 Source Media Application Identifier: DVD Studio Pro:4.0.3, DSPInterface:382, DVDAuthoring:372, DVDBase:396(Encoder: 483), Oxygene:409
    I 08:36:39 Source Media Implementation Identifier: Apple Computer, Inc.
    I 08:36:39 Source Media File System(s): ISO9660, UDF (1.02)
    I 08:36:39 Destination File: C:\Users\...\Desktop\HEMAN_S2V2_D1.ISO
    I 08:36:39 Destination Free Space: 145,672,429,568 bytes (142,258,232 KB) (138,924 MB) (135 GB)
    I 08:36:39 Destination File System: NTFS
    I 08:36:39 File Splitting: Auto
    I 08:36:39 Reading Sectors... (LBA: 0 - 3971567)
    I 08:36:39 Reading Layer 0... (LBA: 0 - 1992719)
    I 08:42:38 Reading Layer 1... (LBA: 1992720 - 3971567)
    I 08:48:29 Image MD5: 3bd6ff07f7732737e8834fd95e1a352c
    I 08:48:29 Operation Successfully Completed! - Duration: 00:11:50
    I 08:48:29 Average Read Rate: 11,187 KB/s (8.1x) - Maximum Read Rate: 16,383 KB/s (11.8x)


    b) Go to Tools > Filter Driver Load Order. Click "Clipboard". Then paste the information you pasted into your clipboard into your next post (ctrl-v).

    I would like to check your filters.

    ===============================================
    Filter Driver Load Order - ImgBurn v2.3.2.0
    ===============================================

    Upper Device Filter: [None Found]
    Upper Class Filter: GEARAspiWDM
    Upper Class Filter: maplom
    Device: CD/DVD-ROM Device
    Lower Class Filter: Pfc
    Lower Class Filter: ElbyCDFL
    Lower Class Filter: AnyDVD
    Lower Class Filter: ElbyDelay
    Lower Device Filter: [None Found]

    Filter Name: GEARAspiWDM
    File Name: C:\Windows\System32\Drivers\GEARAspiWDM.sys
    File Version: 2.0.6.1
    File Description: CD/DVD Class Filter Driver
    Product Name: GEAR.wrks
    Product Version: 8.xx [2.0.6.1]
    Company Name: GEAR Software Inc.
    Copyright: Copyright (c) GEAR Software Inc. 2006

    Filter Name: maplom
    File Name: C:\Windows\system32\Drivers\maplom.sys
    File Version: 2, 9, 18, 570 [2.9.18.570]
    File Description: Maplom.sys
    Product Name: Game Jackal
    Product Version: 2, 9, 18, 570 [2.9.18.570]
    Company Name: SlySoft Inc.
    Copyright: Copyright © 2007 SlySoft Inc.

    Filter Name: Pfc
    File Name: C:\Windows\system32\drivers\pfc.sys
    File Version: 2, 5, 0, 204 [2.5.0.204]
    File Description: Padus(R) ASPI Shell
    Product Name: Padus(R) ASPI Shell
    Product Version: 2, 5, 0, 204 [2.5.0.204]
    Company Name: Padus, Inc.
    Copyright: (C) Padus, Inc. 1999-2001. All rights reserved.

    Filter Name: ElbyCDFL
    File Name: C:\Windows\System32\Drivers\ElbyCDFL.sys
    File Version: 5, 2, 1, 3 [5.2.1.3]
    File Description: ElbyCDIO Filter Driver
    Product Name: CloneCD
    Product Version: 5, 2, 1, 3 [5.2.1.3]
    Company Name: SlySoft, Inc.
    Copyright: Copyright (C) 2003 - 2006 SlySoft, Inc.

    Filter Name: AnyDVD
    File Name: C:\Windows\System32\Drivers\AnyDVD.sys
    File Version: 6.1.7.0
    File Description: AnyDVD Filter Driver
    Product Name: AnyDVD
    Product Version: 6.1.7.0
    Company Name: SlySoft, Inc.
    Copyright: Copyright 2002 - 2007 SlySoft, Inc.

    Filter Name: ElbyDelay
    File Name: C:\Windows\System32\Drivers\ElbyDelay.sys
    File Version: 5, 1, 0, 1 [5.1.0.1]
    File Description: Elby Delay Lower Filter Driver
    Product Name: CDRTools
    Product Version: 5, 1, 0, 1 [5.1.0.1]
    Company Name: Elaborate Bytes AG
    Copyright: Copyright (C) 2003 - 2006 Elaborate Bytes AG


    3. Does the disc play fine with Anydvd enabled? Does the video look messed up at all?
    Plays perfectly, nothing garbled or messed up.

    4. Please also send the ifos to Slysoft: click http://forum.slysoft.com/showthread.php?t=330. I know you posted a link, but it's possible that Slysoft needs them.
    I tried uploading them to this forum, but they exceeded the size limitation. I couldn't find any way to work around this, other than posting them with a download link. I will follow the steps in the link you referenced and send them to Slysoft directly.

    5. I notice you're using Vista.

    a) How much free hard drive space do have left?
    Currently about 135GB on my C drive, and around 800GB on my external drive I save ISOs to.
    b) Disable User Account Control (I doubt this is the problem since you created other .isos, but might as well check) and rip
    No difference.
    c) I wonder if Clonedvd is having problems creating the .iso due to some weird administrative rights issue (Again, I doubt this is the issue, but I have to ask) . . . You do have full access to your hard drive, right?
    Yes.

    6. Right click the red fox icon on your toolbar. Select "rip video-dvd to hard disk". Select your source and destination. Click "Copy dvd". Let us know if you get any error messages. Please provide full error messages. Thank you.
    This also seems to work. No errors received. I'm left with a pile of files as opposed to the one convenient ISO, but I could now presumably create an ISO from these files and have the same thing.
     
  7. camperxl

    camperxl Well-Known Member

    This means, that AnyDVD did not decrypt the movie correctly.

    Make sure that:

    1.) AnyDVD is running on system start
    Done
    2.) AnyDVD is running when you insert the disc
    Done
    3.) Try to disable the CSS archive, if it is enabled
    Not enabled

    EDIT:
    4.) If you use a cracked / keygenned version of AnyDVD: Don't. Modifying the program in any way might affect its ability to decrypt CSS.
    Not cracked or keygenned. 100% legit and paid for copy.

    EDIT2:
    To check AnyDVD's CSS decryption: *Watch* the movie on the PC while AnyDVD is running. If you see a distorted picture, CSS was not decrypted correctly.
    Not distorted - looks perfect.
     
  8. Webslinger

    Webslinger Retired Moderator



    click http://forum.slysoft.com/showpost.php?p=48880&postcount=20

    Then this points to an issue with Clonedvd, in my opinion, unless James has other suggestions.

    Your filters look fine.

    Then I think Anydvd is actually getting the css key properly, and Clonedvd is acting up for whatever weird reason when creating the .iso (that would be the last step after creating all the files). But again, James would probably know better than I would.



    This is very weird. Imgburn works, and Anydvd ripper works (granted Anydvd ripper doesn't create .isos). If Anydvd ripper works, then Anydvd is getting the CSS key correctly (at least that seems to be a reasonable conclusion). So again, this looks to me to be some sort of weird Clonedvd/Vista issue.

    What happens if you rip with Clonedvd and choose to output "dvd files" instead of .iso? Does that work?
     
  9. camperxl

    camperxl Well-Known Member

    1. Check to ensure you're using standard Microsoft ide busmaster drivers provided you're ripping with an ide optical drive.
    I did verify I am using the standard Microsoft drivers with the aid of the link you posted.


    Then I think Anydvd is actually getting the css key properly, and Clonedvd is acting up for whatever weird reason when creating the .iso (that would be the last step after creating all the files). But again, James would probably know better than I would.
    Peter Nord at Elby seemed to think the opposite - that it was not a Clone problem and an AnyDVD problem. I have no idea which is true, but I'm just sayin'...


    This is very weird. Imgburn works, and Anydvd ripper works (granted Anydvd ripper doesn't create .isos). If Anydvd ripper works, then Anydvd is getting the CSS key correctly (at least that seems to be a reasonable conclusion). So again, this looks to me to be some sort of weird Clonedvd/Vista issue.
    Just for kicks I also ran Clone as Administrator - didn't change anything, same errors, but wanted to rule out permissions aspect.

    What happens if you rip with Clonedvd and choose to output "dvd files" instead of .iso? Does that work?
    No, It still fails at 99%. Same error as before.
    D 13.107203: remuxing forced: TC 7 1 01590bee
    E 11:27:02 Processing stopped: unexpected error
    D Error details: Clone 1 TCE
     
  10. Webslinger

    Webslinger Retired Moderator

    Anydvd ripper actually uses some Clonedvd code. I would have expected the same results

    1. Anydvd + imgburn works
    2. Anydvd ripper works
    3. Anydvd active + watching the disc on the computer works
    3. Anydvd + Clonedvd doesn't work.

    Process of elimination points me towards Clonedvd.

    But that remuxing forced message generally means an issue with Anydvd getting the css key wrong.

    Anyway, James is the best judge. He's an Anydvd developer. I'm just an end-user, and I don't work
    for Slyosft nor Elaborate Bytes.

    Better wait to see what he has to say.
     
    Last edited: Sep 7, 2007
  11. James

    James Redfox Development Team Staff Member

    Puzzling. If you select the titles in CloneDVD, does the preview run correctly?
    Can you try to untick titles which look "wrong"?
     
  12. camperxl

    camperxl Well-Known Member

    Yes - all the titles in the preview look correct. None look wrong. [See attached files] - I've had to pare down most of the log file and resize the images to fit them within the forum's constraints. The essentials should be there though.

    Also tried a rip with AnyDVD 6.1.7.4 with same results.
     

    Attached Files:

    Last edited: Sep 10, 2007