Unable to back up "No Hay Derecho Joven" DVD

Discussion in 'CloneDVD' started by jjgttp, May 8, 2008.

  1. jjgttp

    jjgttp Member

    Can Somebody help me? Clone DVD says please wait. Trying to repair defective dvd structure. And Then nothing comes up. And If I hit next It says: Creation of DVD files was not successful .

    I'm using CloneDVD2 2.9.1.7.- AnyDVD 6.4.2.0
     

    Attached Files:

    Last edited: May 8, 2008
  2. Webslinger

    Webslinger Retired Moderator

    Answer these questions fully please: click http://forum.slysoft.com/showthread.php?t=9914
     
  3. jjgttp

    jjgttp Member

    Can Somebody help me? Clone DVD says please wait. Trying to repair defective dvd structure. And Then nothing comes up. And If I hit next It says: Creation of DVD files was not successful .

    I'm using CloneDVD2 2.9.1.7.- AnyDVD 6.4.2.0
     

    Attached Files:

  4. Webslinger

    Webslinger Retired Moderator

  5. Webslinger

    Webslinger Retired Moderator

    1. i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select the region that you're in
    viii. Start Anydvd


    You have a bunch of packet writing junk installed on your system. Sonic's Drag-to-disc software can conflict with other programs including Slysoft's. If you want drag-to-disc functionality, use dvd-ram instead.


    2.
    i) Create a backup of your registry
    ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "DLACDBHM". Click "Remove Selected filter". Select "DRVMCDB". Click "Remove Selected Filter". Select "CDR4_XP" Click "Remove Selected Filter". Select "pwd_2k". Click "Remove Selected Filter". Select "Cdralw2k". Click "Remove Selected Filter. Click "ok".
    iv) Reboot

    Keep in mind the programs that installed those filters may longer work properly.

    3. Click the red fox icon on your toolbar. Click "Default". Click "ok".

    4. Reupload the .zip after you're finished.
     
  6. Webslinger

    Webslinger Retired Moderator

    By the way, that disc doesn't even appear to be protected--at all.

    1) What region was this dvd released in?

    2) What colour is the bottom of the disc?
     
    Last edited: May 8, 2008
  7. jjgttp

    jjgttp Member

    Following the steps but I kinda got lost

    I Follow all the steps fine until I got to 2) iii) Where it says go to tools (Where)?

    The region of the dvd hasn't been set or 0 but I do believe it was released in region 1. And the color of the disc is the same as my other original DVDs.

    And I appreciate your response. Thank You
     
  8. Webslinger

    Webslinger Retired Moderator

    In imgburn.
     
  9. jjgttp

    jjgttp Member

    Foolow the steps and rebooted !!

    And here is the uploaded zip file again
     

    Attached Files:

  10. Webslinger

    Webslinger Retired Moderator

    Please follow these steps in the order that they are listed:

    1. Click the red fox icon on your toolbar. Click "default". Click "ok".

    2. Ensure that you're using Clonedvd 2.9.1.7. Please verify this.


    3. Run Clonedvd. Select "Clone DVD" from the main menu to ensure that you're doing a full disc backup.


    4. Then please post the Clonedvd log:


    click http://forum.slysoft.com/showthread.php?t=476 and follow the steps but note the differences below that I would prefer you do instead:

    i)Select "dvd+/-r DL" near the quality bar in Clonedvd. This avoids compression (so, the process will be faster)

    ii) Select "dvd files" as the output method--and rip to your hard drive.

    [​IMG]
    (thanks to Zebadee for the screenshot)

    iii) You should be able to copy and paste the log text with your mouse (click in the white area shown in the screenshot).


    Try

    [ code ]
    log text
    [ /code ]

    Don't put spaces in the square brackets.

    iv) State the full a)error message(s) you encountered (click "details")

    5. Is this the dvd? http://www.amazon.com/Hay-Derecho-Joven-Julio-Aleman/dp/B000EQ5UZA

    6. Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
     
    Last edited: May 8, 2008
  11. jjgttp

    jjgttp Member

    PS 10 VOBU 4 2069393 274 Clone 6 TCE
    That is the detail message at the end of the pop up window which says:

    Creation of DVD was not succesful
    invalid block start code

    One or more blocks might be corrupted by
    a prior copying process by the source device
    covering critical read errors

    Try copying the video files to your hard drive (again) and retry
     
  12. Webslinger

    Webslinger Retired Moderator

    Last edited: May 8, 2008
  13. jjgttp

    jjgttp Member

    1. Is this the dvd? http://www.amazon.com/Hay-Derecho-Jo.../dp/B000EQ5UZA

    Yes , That's the movie.
     
  14. jjgttp

    jjgttp Member

    2. Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc

    I did the scandisc procedure and it says that it is 100% good and I'm doing a second scan as I type
     
  15. Webslinger

    Webslinger Retired Moderator

    Wow, that's unexpected.

    Click this

    Do what it says to do.

    I've sent Private Messages to some people who work for Slysoft, perhaps they will come back here and offer some more advice. Since other than resetting your busmaster driver, I'm out of suggestions at this time.

    That disc appears to be unprotected.
     
  16. jjgttp

    jjgttp Member

    Wow, that's unexpected.

    I'm about to restart right now. Thanks for your help so far. The second scan on the disc came out the same. So let's hope this is it
     
  17. jjgttp

    jjgttp Member

    Question?

    Do you think that this DVD came out maybe damaged from the factory?

    I can still return it and get another one. What do you think?
     
  18. odd_function

    odd_function Guest


    Have you tried to disable the A.I. scanner?
    (just a guess)
     
  19. Webslinger

    Webslinger Retired Moderator

    1. Click this

    Do what it says to do.

    2. James, the developer of Anydvd believes one of the following is the problem: the disc, a cable on the back of your drive, your drive, or possibly a corrupt or conflicting driver on your system.