the drive cannot find the sector requested

Discussion in 'CloneDVD' started by krumholz, May 18, 2007.

  1. krumholz

    krumholz New Member

    I have ANYDVD 6.1.4.3 and DVDCLONE 2.8.9.9. and trying to copy the movie THE GOOD SHEPHERD into an IFO file in my hard drive. Once dvdclone does the first part (40 minutes) and tries to write in my hard drive (I tried writing to the DVD burner too) it comes with the message "the drive cannot find the sector requested" C:\CLONE DVD TEMP\VIDEO_TS\VTS_01_1.VOB: read error.
    Can someone help me undrestand what is going on? Thanks
     
  2. Webslinger

    Webslinger Retired Moderator

    1. Use Anydvd 6.1.5.1 and Clonedvd 2.9.0.6
    2. Do step 8 from here
    2. Run VSO inspector and scan the disc. VSO inspector is a free program. If VSO inspector reports read errors either the disc is damaged/defective or your drive is dying.
     
  3. krumholz

    krumholz New Member

    Where do I get Anydvd 6.1.5.1.? The website shows 6.1.4.3 as the latest one.
     
  4. Webslinger

    Webslinger Retired Moderator

    click this
     
  5. krumholz

    krumholz New Member

    Thanks I got the new release... This is the information on step 8... I will try to run it again and let you know, unless you have better suggestions.

    Summary for drive D: (AnyDVD 6.1.5.1)
    TOSHIBA DVD-ROM SD-R9012 1121 08/18/03
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2045824 sectors (3995 MBytes)
    Total size: 4085936 sectors (7980 MBytes)

    Video DVD (or CD) label: THE_GOOD_SHEPHERD
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    DVD structure appears to be correct.
    Found & removed invalid VOBUs!
    Autorun not found on Video DVD.
    Bad sector protection not found.
    Emulating RPC-2 drive with region 1!
     
  6. Webslinger

    Webslinger Retired Moderator

    1. Ensure you're using Clonedvd 2.9.0.6

    2. Do step 3 and 4 from here (note that step 4 requires you to post information).

    3. Run VSO inspector and scan the disc. VSO inspector is a free program. If VSO inspector reports read errors either the disc is damaged/defective or your drive is dying.
     
  7. krumholz

    krumholz New Member

    I instaled the latest clonedvd version 2.9.0.6. and it solved the problem. Thanks for your help.
     
  8. Webslinger

    Webslinger Retired Moderator

    No problem. I'm glad everything is working.

    I strongly recommend updating to Anydvd 6.1.5.3 and Clonedvd 2.9.0.7 by the way.