'Source Data too Large' error

Discussion in 'CloneDVD' started by madisonthunderstorm, Dec 16, 2007.

  1. madisonthunderstorm

    madisonthunderstorm New Member

    This problem just started today (using current versions of AnyDVD & CloneDVD): After ripping a DVD using AnyDVD, I go to CloneDVD2 and click on 'CloneDVD'. I noticed that the Quality is suddenly always at the 100% level, in the green (instead of being in the middle and then I would uncheck boxes to increase the quality).

    Once it is done creating the DVD files, right before beginning to write the files, I get a pop-up that reads: "This writer is not capable of writing the source data as requested. To write these DVD files please use the 'Copy DVD Titles' or 'Clone DVD' option from the start screen."

    When clicking on 'Details' on the error message it reads: "WriteDVD 14 W2"

    I am using the 'Clone DVD' option from the start screen. As I said, this problem just appeared out of nowhere today.
     
  2. Webslinger

    Webslinger Retired Moderator

    Select "dvd-5" near the quality bar in Clonedvd if you're using regular single layer discs.
     
  3. madisonthunderstorm

    madisonthunderstorm New Member

    That finally occured to me earlier.

    Thanks so much for your reply!:)
     
  4. Birdstrike

    Birdstrike New Member

    I'm having the same problem. I thought it was because this is the first movie I've copied that goes 2 hrs 18 mins in length and the DVD+RW I was using wasn't large enough. But it's supposedly a 6 hr DVD. I can adjust the burn time (16X for DVD+RW on my HP external burner) but do I have any control over the recording time; 1/2/4/ or 6 hrs according to the DVD label?

    I just made the same "select dvd-5" adjustment. What does dvd-5 refer to?
     
  5. Webslinger

    Webslinger Retired Moderator

    no

    And length doesn't matter so much as the amount of data space used.

    dvd-5 refers to regular single layer discs.

    Selecting "dvd-5" should fix your issue.
     
  6. Birdstrike

    Birdstrike New Member

    Yep, I'm good now. Thanks for the gouge.
     
  7. Webslinger

    Webslinger Retired Moderator

    gouge? :confused:
     
  8. Birdstrike

    Birdstrike New Member

    Gouge = Air Forcespeak for good information. 8)
     
  9. Webslinger

    Webslinger Retired Moderator

    Ah, thanks

    I learned something new :agree:
     
  10. tshylo

    tshylo Member

    Yesterday I began having the exact same problem as madisonthunderstorm with the exact same messages and codes (source data too large; write DVD 14 WS). I have, and have always, chosen DVD -5 in the quality drop-down box and always select Clone DVD from the start page. Of the two DVDs I am attempting to backup one continually fails; the other actually made a backup but would not make another when I inserted a second blank DVD; nor would it make a second backup from the origional disk. Furthermore, attempts to back up the successfull copy failed for the same reason as the others (even though the source data was obviously not too large, coming from a Clone DVD backup. I'm frustrated and lost. Help!
     
  11. tshylo

    tshylo Member

    I just downloaded the newest version of AnyDVD (ver 6634) without improvement.
     
  12. mmdavis

    mmdavis Well-Known Member

    The only thing I can think of is either a CloneDVD update didn't install correctly, some other software is interfering, and/or you may have some defective originals. Keep your Key in a safe place, uninstall CloneDVD, reboot, download CloneDVD 2.9.2.7, install and reboot. If that doesn't work, please post an AnyDVD log.

    How to post an Anydvd .zip log file:
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your system tray.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "OK".
    g) Windows Explorer will open, and you will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f).
    h) When replying or posting in the Slysoft forums, look for the icon that looks like (in other words, look for the paperclip after clicking "quote" or when creating a new thread).
    i) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums).
    k) Click the "Browse" button, and locate and select the .zip file you created.
    l) Click "Upload".
    m) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at.
     
  13. ebertram

    ebertram New Member

    same problem

    trying to backup pirate radio I have ben makeing backup and have not a problem until this one -- I am upto date on all program -- I have a back up computer will try making a backup on it -- I thinks this is a new code to stop backing up disk . :bang:
     
  14. Harrigan46

    Harrigan46 Well-Known Member

    Please post a log file.
    This way someone can help you with your problem.:agree:
    CloneDVD2 2927 and AnyDvd 6634 have no problems with this title!
    Just did a full backup.:D
     

    Attached Files:

  15. mmdavis

    mmdavis Well-Known Member

    This thread has been fixed in the AnyDVD section.