Saw 3

Discussion in 'CloneDVD' started by patand89, Jan 28, 2007.

  1. patand89

    patand89 New Member

    I've tried to burn Saw 3 and have had no luck. Has anyone else had problems? I updated my avy dvd and clone dvd2. It pops up something about repairing something (cant remember what) and it will go to 8% and then a error comes up in the snapshot window. Any suggestion?
     
  2. Franchise

    Franchise Well-Known Member

    Update to the newest AnyDVD if you haven't. It should work then. I didn't have a problem with it.
     
  3. Abraracourcix

    Abraracourcix Member

    Only AnyDVD 6.1.1.3 (just released) will allow an errorless backup.
    If you use an older version, you may get the movie only, but various errors, depending on the program you use.

    I used CloneDVD2, no problem here.

    Saw3, Zone 1, NTSC, Canadian version.

    Abe.
     
  4. KoRn

    KoRn Well-Known Member

    AnyDVD + ClonDVD is the best solution. I made a working copy of SAW III.
     
  5. ETP

    ETP Well-Known Member

    Update site is stuck on the previous version this morning.
     
  6. Naevulle

    Naevulle Member

    Using AnyDVD version 6107 I was able to copy only the movie (US version), no menus or extras. I have not tried with the new version 6113.
     
  7. DAB Badboy

    DAB Badboy Well-Known Member

    Er, try refreshing your browser's cache ...
     
  8. sheep

    sheep Well-Known Member

    It is known that older anydvd versions could backup the movie only. Now it is possible to backup the whole disc.:clap:
     
  9. CincyRob

    CincyRob Member

    i just did it with clonedvd2 & anydvd with no problems. entire disc.

    thanks for the update guys:agree: :clap:
     
  10. duneswater67

    duneswater67 New Member

    saw 3 problem

    usually I have no problem burning but Saw 3 was the first to give me a burning problem. Yes I had the same error as you did and would not burn but with the updates on the newest version I was able to do it.
    It makes it even nicer that this forum is available to share with others our problems.
     
  11. bstard201

    bstard201 Member

    A user on another forum suggested using CloneDVD2....the following was his post..."the dvd structure causes clone to show an error while it is scanning the the titles but i have found a way around it. if you copy just the movie you will have no problems when backing this up but if you want the extras you will have to remove title numbers 2,3,7,9,15,16,17 these are the bad structure titles that cause clone to trip out when removed you can make a perfect back up without a hitch"
     
  12. nicktheboss

    nicktheboss New Member

    clonedvd and anydvd worked for me and even a dual layer worked
     
  13. L@TIN

    L@TIN Member

    Ok dude i got it what you nee to do is go to copy dvd titles and the the rest.. but u dont get no menus...........:bowdown: to the master..
     
  14. easyandunique

    easyandunique New Member

    Still no SawIII

    AnyDvd v 6.1.1.4

    CloneDvd2 v 2.9.0.3

    Still will not copy SawIII



    Data Error (cyclic redundancy check)


    Iso
     
  15. RedFox 1

    RedFox 1 Super Moderator

    Then I would look into another source disk because it definitely works. You may have a defective disc, even though it may play on your DVD Player does not mean it is not defective.
     
  16. MIDNIGHTHAWK

    MIDNIGHTHAWK New Member

    No Luck

    No luck:disagree: with saw III I USE 1 click DVDcopy 5 and ANY DVD ALL UPDATES .ONE THING I DID NOTICE.....IT WILL NOT PLAY IN ANY OF MY COMPUTERS DESKTOP AND LAPTOP..... THE ONLY PLACE I CAN WATCH IT IS ON MY HOME DVD PLAYER......MAYBE IT IS A BAD DISK..... ERROR CORRECTION ON PC'S ARE NOT AS GOOD AS HOME PLAYER!!!ANY IDEAS???
     
    Last edited: Jan 31, 2007
  17. RedFox 1

    RedFox 1 Super Moderator

    What version of 1ClickDVDCopy5 are you using?:confused:
     
  18. bigahole

    bigahole New Member

    It took me quite a while. I thought the movie was bad. I got another one, the same problem happened too. I was able to copy it using the movie only option using a different program. Since I already copied the movie, I did not try the latest Any DVD.
     
  19. NordicRX8

    NordicRX8 Member

    Updates? AnyDVD or DVDClone? Since I tried burning SAW III, there has been 1 (possibly 2) updates to AnyDVD.

    Yes, I was very excited to receive news that SLYSOFT now had a forum! :clap:
     
  20. NordicRX8

    NordicRX8 Member


    Bummer. :(