DaveO88
Moderator
Thread Starter
- Joined
- Dec 29, 2008
- Messages
- 5,659
- Likes
- 755
Guide to prepare and merge a 2 part movie to 1 based on LORD OF THE RINGS – THE FELLOWSHIP OF THE RING (EXTENDED)“ for beginners
Anyway, there are always several possibilities to make this happen. I try to show you an easy way for beginners and at the same time to show the correct usage of the required programs. Some will say this can also be done using other methods, therefore this is just one potential path.
Required programs (always use the newest releases)
-Virtual Clone Drive 5.5.0.0
-CloneBD beta 1.2.9.2
-SubtitleEdit-3.5.18
-TS MUXER GUI 2.6.15 (Nightly build from 2021-02-13-01-46-27)
- BDInfo 0.7.5.9
I assume that you have made yourself familiar already with these programs.
As a first you need to rip part 1 and part 2 to ISO files of the UHD versions of THE FELLOWSHIP OF THE RING to your hard disk.
Now we use Virtual Clone Drive and create 2 virtual drives. (See picture 01)
Picture 01
Then we load the 2 ISOs as a first and second virtual drive (right click on „Virtual Clone Drive“ icon – here drive E: and G: - load image file
It should now look like the picture below. (See picture 02)
Picture 02
Now you go different routes but to better understand the usage of TS MUXER I base it on this program. However, we need to identify the right MPLS files (play lists) in advance. This can be done very easily with CloneBD, which can be used of course also for the previous steps (e.g. making the ISOs). Here we use it to look at the preview. (See pictures 03-05)
Picture 03
Picture 04
Picture 05
You can see that I marked for part 1 and part 2 the play list 803 as the correct one for processing.
Now we start the pre-processing with TsMuxer
We now load part 1 in TsMuxer and remove with the function (remove) the checked lines we don’t need. You need to create two folders in advance where you store the pre-processed ISOs. (See pictures 06-10)
Picture 06
Picture 07
Picture 08
Picture 09 and picture 10
Anyway, there are always several possibilities to make this happen. I try to show you an easy way for beginners and at the same time to show the correct usage of the required programs. Some will say this can also be done using other methods, therefore this is just one potential path.
Required programs (always use the newest releases)
-Virtual Clone Drive 5.5.0.0
-CloneBD beta 1.2.9.2
-SubtitleEdit-3.5.18
-TS MUXER GUI 2.6.15 (Nightly build from 2021-02-13-01-46-27)
- BDInfo 0.7.5.9
I assume that you have made yourself familiar already with these programs.
As a first you need to rip part 1 and part 2 to ISO files of the UHD versions of THE FELLOWSHIP OF THE RING to your hard disk.
Now we use Virtual Clone Drive and create 2 virtual drives. (See picture 01)
Picture 01
Then we load the 2 ISOs as a first and second virtual drive (right click on „Virtual Clone Drive“ icon – here drive E: and G: - load image file
It should now look like the picture below. (See picture 02)
Picture 02
Now you go different routes but to better understand the usage of TS MUXER I base it on this program. However, we need to identify the right MPLS files (play lists) in advance. This can be done very easily with CloneBD, which can be used of course also for the previous steps (e.g. making the ISOs). Here we use it to look at the preview. (See pictures 03-05)
Picture 03
Picture 04
Picture 05
You can see that I marked for part 1 and part 2 the play list 803 as the correct one for processing.
Now we start the pre-processing with TsMuxer
We now load part 1 in TsMuxer and remove with the function (remove) the checked lines we don’t need. You need to create two folders in advance where you store the pre-processed ISOs. (See pictures 06-10)
Picture 06
Picture 07
Picture 08
Picture 09 and picture 10