1. RedFox is offering a Xmas discount of 20% on all products (except upgrades/renewals), valid until December 18, 2022. If you are entertaining the thought of purchasing one of our products then now is the right time to act!
    Dismiss Notice

Flushing takes forever any ideas?

Discussion in 'CloneDVD' started by wildwhitts, May 10, 2007.

  1. wildwhitts

    wildwhitts New Member

    Hi I am new to anydvd and it seems that after I write to a disc, it takes and additional hour to flush the folders and write the boarders. Am I doing something wrong?
  2. James

    James Redfox Development Team Staff Member

    As AnyDVD does not write at all, I assume your are talking about CloneDVD, right?
  3. wildwhitts

    wildwhitts New Member

    Yes I am sorry that is correct
  4. wildwhitts

    wildwhitts New Member

    I am using clonedvd2, and an hp dvd writer 640b (rev E152) speed is set to max. Any ideas?
  5. Webslinger

    Webslinger Retired Moderator

    1. Update your burner's firmware (if available)

    2. Use good quality media only
    visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25

    3. Iolo Antivirus with System Mechanic issue

    source http://forum.slysoft.com/showthread.php?t=4027

    It seems reasonable to suspect other Antivirus programs might interfere as well.

    4. Disable the .wav sound that plays at the end of the burn

    source http://forum.slysoft.com/showpost.php?p=12096&postcount=8

    5. Try lowering your burn speed (not below 4x; if you have a 16x burner and 16x rated media try writing to it at 12x or 8x instead of 16x)

    6. Avoid sticker labels (they tend to cause problems)

    7. Try setting a custom size of 4300 in Clonedvd (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.

    Bad burn quality is notorious around the end of discs (see step 7 )
    and also at layer breaks when using low quality DL media (use Verbatim +R DL media, and change the booktype to "dvd-rom)

    8. Click this

    Do what it says to do.

    9. visit http://forum.slysoft.com/showpost.php?p=21907&postcount=11 (thanks to Zebadee)
    Use one of the programs mentioned, and list your Lowerfilters and Upperfilters in your next post.

    Or for XP users only,
    Click Start, Run
    type regedit
    Go to
    HKEY_LOCAL_MACHINE\SYSTEM\Current Control Set\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    We want what's listed in "LowerFilters" and "UpperFilters". List your Lowerfilters and Upperfilters in your next post.
    Last edited: May 10, 2007