Cyclic Redundancy Error - Cars

Discussion in 'CloneDVD' started by Grae, Nov 24, 2007.

  1. Grae

    Grae Member

    I know what you are thinking, "not another bad disc problem" but this isn't as far as I can tell a bad disc.

    I'm trying to copy Pixar Cars on DVD, set to region 2, and was bought some time ago (2005/2006) in the UK. When I run AnyDVD in the backgroung and use CloneDVD to clone the disc the DVD cloning starts as normal, however with 1 Min 55 Secs to go I get a Data Error (Cyclic redundancy Error) appear every time.

    After reading your forums on similar problems I tried using Nero CD-DVD Drivespeed and it gave the disc a clean bill of health (log file attached).

    I have also set the logging to enabled on AnyDVD and that is also attached.

    AnyDVD version is 6.2.0.1
    CloneDVD version is 2.9.1.2 registered to 12072072

    My DVD Writer has the latest Firmware version installed.

    The question is am I doing something fundamentally wrong or is this a symptom of one of the encryptions used by Disney as It is doing the same thing with DVDFab, DVD HD Decrypter, Ripit4me, etc.

    Any help would be appreciated.:confused::confused:
     

    Attached Files:

  2. Webslinger

    Webslinger Retired Moderator


    Update to 6.2.0.2 (and ensure you're using the default settings in Anydvd. Click the "default" button in Anydvd. Then click "ok"). click http://forum.slysoft.com/showthread.php?t=10074

    Do this while I'm looking at your .zip file please.
     
  3. Webslinger

    Webslinger Retired Moderator

    1. Try uninstalling B's Recorder GOLD7, and see if that makes a difference.

    Also check to ensure that filter is no longer listed in your registry:

    i) Create a backup of your registry
    ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "cdrbsdrv". Click "Remove Selected Filter". Click "ok".
    iv) Reboot

    2. Try disabling the AI scanner in Anydvd. Click the red fox icon on your toolbar-->Navigate to "Video DVD"-->"Settings"-->AI scanner)
     
  4. Grae

    Grae Member

    Ok, I have either installed or removed as per your suggestions above. Couldn't find any programs referring to B's Recorder Gold 7 so I am assuming that is a leftover from a previous software installation that has been subsequently removed.

    I'm going to try and clone the DVD with the AI scanner off now. I will post the log, or more info shortly.

    Thanks for your help so far! :bowdown:
     
  5. Webslinger

    Webslinger Retired Moderator

    ) Create a backup of your registry
    ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "cdrbsdrv". Click "Remove Selected Filter". Click "ok".
    iv) Reboot
     
  6. Grae

    Grae Member

    Have already done this before my last post, and have done what was described for the AnyDVD installtion but still the same thing happening (see attachment).

    Could it be something to do with the Encryption routines?
     

    Attached Files:

  7. Webslinger

    Webslinger Retired Moderator

    Your screenshot is too small for me to be able to read it. I would like to be able to read the full error message

    Please reupload your .zip with Anydvd 6.2.0.2

    Maybe James will need to take a look.
     
  8. Grae

    Grae Member

    I don't know if this helps but I've cut the error message which is attached. I've also attached the .zip file too.

    Disc has been cleaned three times, and has even been through a SkipDR as there was some minor scratches on it.
     

    Attached Files:

    Last edited: Nov 25, 2007
  9. Webslinger

    Webslinger Retired Moderator

    I've got a feeling that despite the fact Nero scandisc isn't reporting read errors the disc is simply damaged and needs to be replaced.

    However, it's possible that James will take a look and see if there's an issue with the protection on the disc.
     
  10. Grae

    Grae Member

    Might be worth waiting for his input. I assume that he is in the States so he will probably not get this until after Thanksgiving.

    Thanks for your help so far;)
     
  11. James

    James Redfox Development Team Staff Member

    Looks like the disc (or your reader) is damaged.
    As the read error is in VTS14, you can try to disable titles 39, 40 and 41 in CloneDVD.