Can't backup BG Razor either!

Discussion in 'AnyDVD HD (DVD issues)' started by JustDave, Jan 13, 2008.

  1. JustDave

    JustDave New Member

    This really needs to be addressed by Slysoft.
    I'm NOT going to uninstall AnyDVD and install an older version just for this movie.
    If it used to work, then they need to fix whatever they broke.
    If it doesn't work, then they need to figure out why because this can't be the only DVD out there with this issue.
    I didn't pay for this program to have it 'kind of work'.
     
  2. Webslinger

    Webslinger Retired Moderator

    1. Do not post in other people's threads unless you want to help them please: click http://forum.slysoft.com/announcement.php?f=18

    2. Anydvd handles this disc fine.

    3. If you want help, start providing requested information:

    A. a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic original disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    Otherwise your post is not constructive, and you have not provided any useful information.
     
    Last edited: Jan 13, 2008
  3. HAMsmoke

    HAMsmoke Active Member

    Not only did it used to work, it still works. Here is my summary from AnyDVD 6.3.0.8:

    Summary for drive E: (AnyDVD 6.3.0.8)
    HL-DT-ST DVD-RAM GSA-E60L 1.00 07/05/15 7U02
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 1887328 sectors (3686 MBytes)
    Total size: 3774649 sectors (7372 MBytes)

    Video DVD (or CD) label: ASDF
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    Structural copy protection not found.
    Autorun not found on Video DVD.
    Bad sector protection not found.
    Emulating RPC-2 drive with region 1!

    I used the AnyDVD Ripper to rip to hard drive. I then used CloneDVD2, the new beta, to do a full copy to a DVD-RW disk. And, even with all of the advice not to have InCD installed, I do (version 5.8.9.0). The copy works fine - I can see both the original and the movie with additional footage.

    While you may be having problems copying the disk, it shouldn't automatically be assumed that AnyDVD is the cause of all misery.
     
  4. Webslinger

    Webslinger Retired Moderator

    I think it depends on the version of Incd being used. I've had enough cases in the Clonedvd forum where removing Incd fixed the Writedvd 10 11 W2 errors people were having so that I do know Incd can be an issue (but unfortunately I haven't been paying attention to what version of Incd was being used--and on what OS, etc.).
     
    Last edited: Jan 14, 2008