AnyDVD running/ripping slow

Discussion in 'AnyDVD HD (DVD issues)' started by Jwallace66, Feb 9, 2007.

  1. Jwallace66

    Jwallace66 New Member

    I was using an old version of AnyDVD and I was able to make a copy of DVDs in about 30-40 minutes. Now with the latest version of AnyDVD it takes over 3 hours to rip it then another hour to copy to the DVD. Support from AnyDVD were of no help at all. Any ideas...? Thanks.
     
    Last edited: Feb 9, 2007
  2. Charlie

    Charlie Well-Known Member

    Please read This and provide us with the needed info.
     
  3. lordvader

    lordvader Active Member

    Other programs?

    What other programs are you using with it? Three hours does not sound right at all! I also have 6.1.14 and the average movie for me takes about 40-45 minutes using shrink and decrypter! Saw 3 took longer though! Not using shrink of course!
     
  4. Charlie

    Charlie Well-Known Member

    3 or 4 hours is long but 40 minutes is too. I get mine done within 10 to 15 minutes using clonedvd2 and anydvd. This is just the rip process doing whole movie, and yes saw 3 was a bit longer to do.
     
  5. oldjoe

    oldjoe Well-Known Member

    Have you checked the transfer mode of your DVDRW?
    Go to
    1. My Computer
    2. Control Panel
    3. System
    4. Hardware
    5. Device Manager
    6. IDE ATA/ATAPI controllers
    7. Open the installed IDE channels (Primary and Secondary)
    8. Click on Advanced settings
    9. You will see the transfer mode. If any are PIO you need to un-install the channel (right click and choose uninstall) and re-boot. Windows will reinstall the device and return it to DMA mode.
     
  6. linx05

    linx05 Well-Known Member

    Just to clarify Jwallace66, AnyDVD only decrypts the movie. You will need another program to rip the now unprotected DVD to your hard drive or a simple drag 'n' drop will suffice.
     
  7. Brando

    Brando New Member

    I too am having problems with slowness ripping. Right now, ripping The Fountain ... 1 hour and a half in its at 62%. This started with the last version ... updated to 6.1.5.5 today and its still slow. Before the last version I was ripping in roughly 10 minutes give or take.

    Checked DMA in Device Mgr. I don't have the IDE ATA/ATAPI Controllers section. Not sure where else to check for DMA (and don't think it would have changed just by upgrading AnyDVD).

    Any ideas?
     
  8. tebugg

    tebugg Beta Tester

    the best way i've found to rip the files to hard drive that r over 4.5gb in size is to have anydvd running in the background. open up your explorer and go into the disc. select all the items on the disc then copy/paste them anywhere on your hard drive. the process goes about as fast as your dvd burner can read. if the disc is already under 4.5gb, i'd recommend keepin anydvd running in background and get ImgBurn and just copying the disc to Hard drive as .iso thru ImgBurn.
     
  9. Webslinger

    Webslinger Retired Moderator

    No. This is how you should rip with Anydvd
     
    Last edited: May 24, 2007
  10. Brando

    Brando New Member

    I was doing step 3 ... (right click on the fox icon on your toolbar and select "rip video-dvd to hard disk") ... I'll try the other steps and see how it goes. Otherwise I'll just uninstall/reinstall.
     
  11. Webslinger

    Webslinger Retired Moderator

    Please click this