Hi,
ich habe versucht diverse 3d Filme auf eine 50GB Blu Ray zu brennen.
Datei wird als Img gebrannt von Any DVD erstellt, bei 25 gb Rohlingen läufts
Leider bricht er bei 34% ab.
An 2 Rohlingen getestet
Brenner LG GGW-H20L
Xlayer Rohlinge.
Vorher lief es schonmal mit dem Brenner aber jetzt habe ich ihn in einem neuen PC und es läuft nicht mehr Firmware ist die neue YL7
Hier mal ein Auszug bis er nicht mehr weiter mach bei Burn IMG
Speed geht dann auf 0 und passiert nichts mehr.
Damals hatte ich auch erst so ein problem beim anderen PC das wirde durch neue Firmware gelöst. Aber half hier nichts.
I 14:59:40 Operation Started!
I 14:59:40 Source File: G:\test.iso
I 14:59:40 Source File Sectors: 22.682.432 (MODE1/2048)
I 14:59:40 Source File Size: 46.453.620.736 bytes
I 14:59:40 Source File Volume Identifier: test
I 14:59:40 Source File Volume Set Identifier: 8CE0A43CA4484056_VOLUME_SET_ID
I 14:59:40 Source File Application Identifier: APPLICATION_ID
I 14:59:40 Source File Implementation Identifier: IMPLEMENTATION_ID
I 14:59:40 Source File File System(s): UDF (2.50)
I 14:59:40 Destination Device: [0:0:0] HL-DT-ST BD-RE GGW-H20L YL07 (D (ATAPI)
I 14:59:40 Destination Media Type: BD-R (Disc ID: CMCMAG-DI6-000)
I 14:59:40 Destination Media Supported Write Speeds: 2x
I 14:59:40 Destination Media Sectors: 24.438.784
I 14:59:40 Write Mode: BD
I 14:59:40 Write Type: DAO
I 14:59:40 Write Speed: MAX
I 14:59:40 BD-R Verify Not Required: Yes
I 14:59:40 Link Size: Auto
I 14:59:40 Lock Volume: Yes
I 14:59:40 Test Mode: No
I 14:59:40 OPC: No
I 14:59:40 BURN-Proof: Enabled
I 14:59:40 Write Speed Successfully Set! - Effective: 8.991 KB/s (2x)
I 15:00:06 Filling Buffer... (40 MB)
I 15:00:07 Writing LeadIn...
I 15:00:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 22682431)
I 15:00:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 22682431)
I 15:00:08 Writing Layer 0... (LBA: 0 - 12219391)
ich habe versucht diverse 3d Filme auf eine 50GB Blu Ray zu brennen.
Datei wird als Img gebrannt von Any DVD erstellt, bei 25 gb Rohlingen läufts
Leider bricht er bei 34% ab.
An 2 Rohlingen getestet
Brenner LG GGW-H20L
Xlayer Rohlinge.
Vorher lief es schonmal mit dem Brenner aber jetzt habe ich ihn in einem neuen PC und es läuft nicht mehr Firmware ist die neue YL7
Hier mal ein Auszug bis er nicht mehr weiter mach bei Burn IMG
Speed geht dann auf 0 und passiert nichts mehr.
Damals hatte ich auch erst so ein problem beim anderen PC das wirde durch neue Firmware gelöst. Aber half hier nichts.
I 14:59:40 Operation Started!
I 14:59:40 Source File: G:\test.iso
I 14:59:40 Source File Sectors: 22.682.432 (MODE1/2048)
I 14:59:40 Source File Size: 46.453.620.736 bytes
I 14:59:40 Source File Volume Identifier: test
I 14:59:40 Source File Volume Set Identifier: 8CE0A43CA4484056_VOLUME_SET_ID
I 14:59:40 Source File Application Identifier: APPLICATION_ID
I 14:59:40 Source File Implementation Identifier: IMPLEMENTATION_ID
I 14:59:40 Source File File System(s): UDF (2.50)
I 14:59:40 Destination Device: [0:0:0] HL-DT-ST BD-RE GGW-H20L YL07 (D (ATAPI)
I 14:59:40 Destination Media Type: BD-R (Disc ID: CMCMAG-DI6-000)
I 14:59:40 Destination Media Supported Write Speeds: 2x
I 14:59:40 Destination Media Sectors: 24.438.784
I 14:59:40 Write Mode: BD
I 14:59:40 Write Type: DAO
I 14:59:40 Write Speed: MAX
I 14:59:40 BD-R Verify Not Required: Yes
I 14:59:40 Link Size: Auto
I 14:59:40 Lock Volume: Yes
I 14:59:40 Test Mode: No
I 14:59:40 OPC: No
I 14:59:40 BURN-Proof: Enabled
I 14:59:40 Write Speed Successfully Set! - Effective: 8.991 KB/s (2x)
I 15:00:06 Filling Buffer... (40 MB)
I 15:00:07 Writing LeadIn...
I 15:00:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 22682431)
I 15:00:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 22682431)
I 15:00:08 Writing Layer 0... (LBA: 0 - 12219391)
Last edited: