1.2.7.1 and hardware compatability

Discussion in 'CloneBD' started by DarkQuark, Dec 23, 2019.

  1. DarkQuark

    DarkQuark Well-Known Member

    I see the release notes for 1.2.7.1 mention hardware compatibility. I just tried to convert a Blu-ray but my previous issue remains where hardware is indeed used but the output bitrate is very low and my changes to it seem to be ignored.

    For example I set the convert to a 12mb bitrate which should have generated around an 11GB file. However what was produced was a 1.8GB file.

    AMD 5700 XT
    19.12.3 driver

    Thank you
     
  2. Recycle

    Recycle Well-Known Member

    Log Files from CloneBD and AnyDVD HD???
     
  3. Fabian

    Fabian Developer

    That is most likely a problem with the AMD driver itself. We are in contact with AMD to figure out why in some cases the set bitrate is ignored and the output bitrate is much lower.
     
  4. DarkQuark

    DarkQuark Well-Known Member

    OK thank you for the update. If it helps I have had this issue through several revisions of the AMD driver at this point including the latest of 19.12.3 . Interestingly enough I do not think I had the situation until I changed from a Radeon 480 to a 5700 XT so maybe it is also specific to that. Thanks again.