REMOVE DVD43
If you have AnyDVD ... You definitely won't ever need DVD43
Remove DVD43
~~~~~~~~~~~~~~~~
You have a 'out-dated' version of CopytoDVD Installed ...
COPYTODVD : 3.1.1.135
>>
Remove= COPYTODVD 3.1.1.135
> Reboot
>
ReInstall/Update 1ClickPRO again , over itself
Current PRO Version is
2.5.0.9
http://www.lgsoftwareinnovations.com/download.asp
> Reboot
Do NOT Re Install CopytoDVD .... just yet
let's get 1ClickPRO working well .... first
~~~~~~~~~~~~~~~~~~~~~~~~
Right Click on the PRO Interface > Settings Menu
UNCheck= CPRx error correction enabled
when Using AnyDVD the CPRx correction is not needed
- and may cause 'conflicts'
~~~~~~~~~~~
If you're still having trouble
- after following the above recommendations .....
I might suspect that you may have a "Bad" Source Disc ( ? )
..... so let's get that - out of the way -
Inspect the Disc and try cleaning it - even if it doesn't look like it needs it.
If this doesn't prove successful ...
Use the
VSOInspector to scan the Disc ( it's Free )
http://www.vso-software.fr/products/inspector/inspector.php
If the Inspector reports "READ Errors"
Then you'll know that you've come across a "BAD" Source Disc .
I would then suggest that you acquire a different copy
... and compare your results .
~~~~~~~~~~~~~~
.... Let's check something .....
Go to > Start > My Computer
> Right Click on DVD drive > Properties > Auto-Play tab
What do you have selected for the "Action to Preform" for
'DVD Movie" ?
This should be set as "
Take no action"
OR
Set only for your DVD Player ( WinDVD/PowerDVD )
-
be sure to close your 'Player' before opening 1Click
While here in the DVD Drive 'Properties"
Do you have a "DLA" tab ?
=
Disable DLA
___________________
Would you happen to have
- Nero (
InCD )
or
Roxio (
DragtoDisc )
- installed/active on your Computer ?
FAQ :
Can other software conflict with the installation
and operation of 1Click DVD Copy?