Won't Launch/Open

Discussion in 'AnyDVD HD (DVD issues)' started by launch, Aug 29, 2007.

  1. launch

    launch New Member

    I recently upgraded my AnyDvd to the 6.1.7.0 and now I can't get AnyDvd to even launch...Everything was fine prior to the "upgrade" but now double click, right click...nothing Any Ideas please??
     
  2. Rodster

    Rodster Well-Known Member

    Hi

    Uninstall CloneDVD2 and AnyDVD, then reboot your system completely then reinstall both applications, remembering to reboot between each app. See what happens then.

    Rodney
     
  3. launch

    launch New Member

    Launch

    Thanks but I don't have/use Clone....Plus I can not locate my "key" for AnyDvd I can find where the key is on my cpu but when I try to open it it just says (click ok! and re-boot to register).
    Is there a way to just go back to the older version and be done with this whole mess????
     
  4. Webslinger

    Webslinger Retired Moderator

    Follow the steps:

    If you're using Vista, then click this.

    If you have Zonealarm on your system, ensure Anydvd is being given permission to access the trusted zone.
    Similarly if you have a firewall, antivirus or spyware program--ensure it's not blocking Anydvd from running.
    Provided you downloaded Anydvd from Slysoft's website, Anydvd is a safe program (you have nothing
    to be paranoid about).

    If you have System Mechanic, System Mechanic Pro, or any kind of registry monitoring program, please ensure
    these programs are allowing Anydvd's installation program to modify your registry--as those programs can block
    Anydvd from installing properly.

    If you keep getting "your trial has ended" messages, despite using your license key
    visit http://forum.slysoft.com/showthread.php?t=196

    If Anydvd says your drive is disabled, ignore the message unless you also receive it
    when you have a movie inserted in that drive.
    Some drives' firmware may report the wrong
    information to Anydvd. Often Anydvd will still function properly.
    visit http://forum.slysoft.com/showpost.php?p=2891&postcount=12 (Zebadee's Anydvd works fine)

    If Anydvd can't see your drives or they aren't listed, click the red fox icon on your toolbar. Navigate to "Drives"-->"Selection".
    Ensure your optical drives are checkmarked.

    Right click the Anydvd icon on your desktop. Click "properties". Click the "Compatibility tab". If you're using
    Windows XP, ensure the box for "compatibility mode" is not selected. -- thanks to vbro for the information

    linx05 says Teatimer enabled on Spybot can cause problems during installation: visit http://forum.slysoft.com/showpost.php?p=36804&postcount=5

    1. Exit out of all Slysoft programs and reinstall

    a) Keep your license key file backed up safely
    b) Uninstall Anydvd (start-->all programs-->Slysoft--->Anydvd-->Uninstall)
    c) Reboot
    d) Try running a registry cleaner program at this point like CCleaner
    e) Download Anydvd http://sandbox.slysoft.com/beta/SetupAnyDVD6172.exe
    f) Exit all Slysoft programs (including Anydvd, Clonedvd2, Clonecd, Clonecdtray, Clonedvdmobile, etc.). Check Windows Task Manager if you have to.
    g) At this point disable your antivirus and firewall programs
    h) Reinstall
    i) Reboot
    j) Install your license key (if required) http://forum.slysoft.com/showthread.php?t=732
    k) At this point enable your antivirus and firewall programs


    If that doesn't work go on to step 2.

    2. Read http://forum.slysoft.com/showthread.php?t=1307 fully


    3.

    a) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)

    b) Go to Tools > Filter Driver Load Order. Click "Clipboard". Then paste the information you pasted into your clipboard into your next post (ctrl-v).


    OR

    visit http://forum.slysoft.com/showpost.php?p=21907&postcount=11 (thanks to Zebadee)
    Use one of the programs mentioned, and list your Lowerfilters and Upperfilters in your next post.

    Or for XP users only,
    Click Start, Run
    type regedit
    Go to
    HKEY_LOCAL_MACHINE\SYSTEM\Current Control Set\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

    We want what's listed in "LowerFilters" and "UpperFilters". List your Lowerfilters and Upperfilters in your next post.

    Before you do this visit http://www.cdr-zone.com/forum/about4719.html, and read the first post please, so you can get a better understanding of what is going on.

    Do not start randomly deleting filters, please.

    4. If Anydvd/Clonedvd2 is locking up at this point, then read http://forum.slysoft.com/showpost.php?p=24297&postcount=4
     
    Last edited: Sep 7, 2007