we own the night

Discussion in 'AnyDVD HD (DVD issues)' started by mesa101, Feb 13, 2008.

  1. mesa101

    mesa101 New Member

    using 6.3.1.5 anydvd and clone 2.9.1.5 gets to about 56% and wont read the disc... wont rip to hd either.
     
  2. Webslinger

    Webslinger Retired Moderator

    That's not a full error message

    1 a) Ensure Anydvd is running.
    b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"

    2) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?
     
  3. mesa101

    mesa101 New Member

    as stated above, using anydvd 6.3.1.5 and clonedvd 2.9.1.5

    get this error in clonedvd.. File 1 E:/VIDEO_TS/VTS_01_5.VOB 23 TCSectorReader read error
     

    Attached Files:

    Last edited: Feb 13, 2008
  4. Webslinger

    Webslinger Retired Moderator

    1.
    i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select the region that you're in
    viii. Start Anydvd

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    This Arcsoft filter is known to cause conflicts with Slysoft software. Arcsoft Photo impressions (or anything that installs afc.sys)


    dvd43 is completely useless if you own Anydvd, and may cause conflicts with Anydvd

    Uninstall dvd43. Ensure that filter is no longer listed.

    3. i) Create a backup of your registry
    ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "dvd43llh". Click "Remove Selected Filter". Select "AFC". Click "Remove Selected Filter". Click "ok".
    iv) Reboot



    Keep in mind the programs that installed those filters will no longer function properly.

    4. When you've done the above download Nero CD-DVD Speed. It's a free program. Run the program, and select the ScanDisc tab. Scan your original disc. If you get errors, the original disc is bad (or your drive is slowly dying)
     
    Last edited: Feb 13, 2008