Watch Out 3:10 To Yuma

Discussion in 'AnyDVD HD (DVD issues)' started by odell, Jan 4, 2008.

  1. odell

    odell Member

    I CAN'T SAY MUCH BECAUSE IT'S NOT RELEASED UNTIL 1-8-08. 3:10 TO YUMA IS NOT RIGHT. I WISH I COULD SAY MORE. NEXT TUESDAY, I'M QUITE SURE MANY OTHERS WILL. GOOD LUCK:confused::confused:
     
  2. boobear1998

    boobear1998 Well-Known Member

    I was able to back 3:10 to Yuma with the latest Any DVD

    You must rip video to harddisk
    Summary for drive E: (AnyDVD 6.3.0.6)
    HL-DT-ST RW/DVD GCC-4482B 1.06 H.L.D.S.2006/05/04
    Drive (Hardware) Region: 0 (not set!)

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2084960 sectors (4072 MBytes)
    Total size: 4158096 sectors (8121 MBytes)

    Video DVD (or CD) label: 310 To Yuma
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Found & removed 7 potential bad sector protections!
    Emulating RPC-2 drive with region 1!
     
  3. Webslinger

    Webslinger Retired Moderator

    1.
    a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the problematic disc in your optical drive/reader.
    f) Go to your "My Documents" folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"

    2. Right click on the fox icon on your toolbar and select "rip video-dvd to hard disk"

    3. Download Nero cd-dvd speed. It's a free program. With Anydvd running in the background, select the tab labeled "scandisc". Select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your disc is (probably) bad and needs to be exchanged--even if it plays fine (or your optical drive could be slowly dying).
     
  4. boobear1998

    boobear1998 Well-Known Member

    3:10 to yuma seem to back up fine with the latest AnyDVD beta

    Summary for drive E: (AnyDVD 6.3.0.6)
    HL-DT-ST RW/DVD GCC-4482B 1.06 H.L.D.S.2006/05/04
    Drive (Hardware) Region: 0 (not set!)

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2084960 sectors (4072 MBytes)
    Total size: 4158096 sectors (8121 MBytes)

    Video DVD (or CD) label: 310 To Yuma
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    Found & removed structural copy protection!
    Found & removed invalid cell pieces!
    Found & removed bogus title set(s)!
    UDF filesystem patched!
    Autorun not found on Video DVD.
    Found & removed 7 potential bad sector protections!
    Emulating RPC-2 drive with region 1!
     

    Attached Files:

  5. Charlie

    Charlie Well-Known Member

    Drive (Hardware) Region: 0 (not set!)

    You need to set your drive region.

    i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select region 1
    viii. Start Anydvd
     
  6. boobear1998

    boobear1998 Well-Known Member

     
  7. Charlie

    Charlie Well-Known Member

    No problem.
     
  8. oldjoe

    oldjoe Well-Known Member

    I had an advance copy of 3:10 to Yuma about 3 weeks ago and it presented no problems. AnyDVD and Shrink.
     
  9. lostinlodos

    lostinlodos Well-Known Member

     
  10. Webslinger

    Webslinger Retired Moderator

    boobear isn't having a problem

    The problem is the <> symbols that need to be removed in Clonedvd's temp path: click http://forum.slysoft.com/showthread.php?t=11734

    So, just remove them.
     
  11. dude2063

    dude2063 Well-Known Member

    Drive region

     
  12. Fred0149

    Fred0149 Well-Known Member

    No problem with anydvd 6303, and clone dvd 2912.