Slow burn with second drive added.

Discussion in 'CloneDVD' started by plumb54, Feb 12, 2007.

  1. plumb54

    plumb54 Member

    Hi guys can anybody help me with this? I have been useing AnyDVD and CloneDVD for the past three years and have had no problems at all and am glad that i made the purchase,i have allways had just the one burner up untill a few weeks ago and the single burner would read and then write in just 45mins-1hr depending on the film,but eversince adding a second drive if i use that drive it can take a couple of hrs or more. I have the same settings in CloneDVD2 for both drives and they are set to write @4x speed.
    The original drive is a TEAC DVD+RW DV-W58E that only writes + discs and the new drive is a TSSTCORP CD/DVDW SH-S182M multi read/write from samsung. They are both on the same ide cable the Teac is set to master and the samsung is set to slave,as i said they both write ok but the samsung takes ages where have i gone wrong :doh:
    Thanks in advance.