• AnyStream is having some DRM issues currently, Netflix is not available in HD for the time being.
    Situations like this will always happen with AnyStream: streaming providers are continuously improving their countermeasures while we try to catch up, it's an ongoing cat-and-mouse game. Please be patient and don't flood our support or forum with requests, we are working on it 24/7 to get it resolved. Thank you.

Sherlock Holmes

S

sheep

Well-Known Member
Thread Starter
Joined
Jan 28, 2007
Messages
696
Likes
1
Clone dvd gives me the error after a while that the disc is badly mastered.
I attached the log file.


(It works with dvdfab btw, so i don't think it is the dvds fault. ;) )
 

Attachments

  • AnyDVD_6.6.6.0_Info_F_SHERLOCK_HOLMES.zip
    102.8 KB · Views: 13
Summary for drive F: (AnyDVD 6.6.6.0)
ATAPI DVD ADH16A6S YA17 2008/12/17 12:19
Drive (Hardware) Region: 0 (not set!)
Click to expand...

You didnt set your drive hardware region. AnyDVD can have trouble decrypting CSS discs without the drive region set properly.

Warning bad filter found. The following filter has been known to cause problems with AnyDVD. Use IMGBurn and load the filterlist to remove it.
CDROM Class UpperFilters:
NTIDrvr (system32\Drivers\NTIDrvr.sys), Version: 1.0.0.8 (1.0.0.8)
Company: NewTech Infosystems, Inc.
Copyright: Copyright (C) 2002 NewTech Infosystems, Inc.
Description: NTI CD-ROM Filter Driver
FileVersion: 1, 0, 0, 8
ProductVersion: 1, 0, 0, 8
Click to expand...
 
Sheep? Do I know you from somewhere else? AW perhaps?

-W
 
sheep said:
Clone dvd gives me the error after a while that the disc is badly mastered.
I attached the log file.
Click to expand...

In this case the CloneDVD log file (containing this error) would be interesting.
 
sheep said:
(It works with dvdfab btw, so i don't think it is the dvds fault. ;) )
Click to expand...
I don't care what DVDFab does or doesn't do. And it really doesn't mean much. ;)
 
sheep said:
Clone dvd gives me the error after a while that the disc is badly mastered.
I attached the log file.
Click to expand...
Does AnyDVD ripper work? And do yourself a favor, set the region code of your drive.
 
@Clams:
Cd- Freaks. Digital Digest maybe?

@James: I try the ripper. Anydvd keeps telling me that i have to set the region although I set it.
 
sheep said:
@James: I try the ripper. Anydvd keeps telling me that i have to set the region although I set it.
Click to expand...

I guess you didn't do it right.

AnyDVD_Status

Code: 
Summary for drive F: (AnyDVD 6.6.6.0)
ATAPI DVD ADH16A6S YA17 2008/12/17 12:19
Drive (Hardware) Region: 0 (not set!)

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 1707360 sectors (3334 MBytes)
Total size: 3111515 sectors (6077 MBytes)

Video DVD (or CD) label: SHERLOCK_HOLMES
Media is CSS protected!
Media is locked to region(s): 2!
Video Standard: PAL

AI scan forced, heuristic scan detected no protection!
Found & removed structural copy protection!
RCE protection not found.
Autorun not found on Video DVD.
Bad sector protection not found.
Emulating RPC-2 drive with region 2!
The version of AnyDVD you are using ( 6.6.6.0 ) is up to date. If you are a registered user, I strongly recommend that you update to the latest beta version 6.6.6.1

Code: 
ATAPI DVD ADH16A6S YA17 2008/12/17 12:19
Please ensure you are using the latest firmware for your optical drive. See here.

Rip speeds on DVD and Blu-Ray might be improved by MediaCodeSpeedEdit. Please see RIPLOCK.
If installed (often from Duplex Secure, Daemon Tools or Alcohol 120% ), uninstall SPTD, which is the culprit for slow rips.
See here and here.

Code: 
Drive (Hardware) Region: 0 (not set!)
Your region code is not set.

With some DVDs and some drives, AnyDVD cannot decrypt CSS unless your drive's region code is set properly.
You must exit AnyDVD when checking.
  1. Right click the fox on your toolbar. Exit AnyDVD.
  2. Click start. Right click on My computer--->select properties.
  3. Click on the Hardware tab--->click the device manager button.
  4. Open the DVD/DROM branch---> right click on your optical drive.
  5. Click properties.
  6. You should have a region tab. From there you can select a region.
  7. Select the region that you're in
  8. Start AnyDVD.
SysInfo

Problematic Filter NTIDrvr Typically NTI's Filecd, which is packet writing software installs that filter:
Code: 
CDROM Class UpperFilters:
NTIDrvr (system32\Drivers\NTIDrvr.sys), Version: 1.0.0.8 (1.0.0.8)
Company: NewTech Infosystems, Inc.
Copyright: Copyright (C) 2002 NewTech Infosystems, Inc.
Description: NTI CD-ROM Filter Driver
FileVersion: 1, 0, 0, 8
ProductVersion: 1, 0, 0, 8
Refer here for an list of known problematic filters. Further filter information here

Remove the filter(s):

  1. Create a backup of your registry. Refer here for how to do so.
  2. Download ImgBurn (freeware).
  3. Start ImgBurn and go to Tools > Filter Driver Load Order...
  4. Select "NTIDrvr". Click Remove Selected Filter. Click OK.
  5. Reboot.

Whatever programs installed the filter may no longer work properly.
Reinstall the piece of software that originally installed the filter to get things working again if necessary.
It is not recommended that you do so, however, because the problem will likely happen again at a later time

After carrying out the above recommendations, please create and post a new set of log files.
 
I set the region like that but it is still the same.

Can't attache the clone log, because it is to big to attache here.
I will try anydvd ripper later.
 
Remember to EXIT AnyDVD entirely before setting region on drive.

-W
 
i get the same kind of error trying to use clonedvd2. i am able to rip it with anydvd, and am useing dvdrebuilder but i cant get clonedvd2 to burn this, or i should say create the files to burn it. here is the log from clonevd2


I 08:08:23 Processing started
D CloneDVDVersion: 2.9.2.2
D Layer break removed at 1 locations
I 08:08:23 Successfully removed layer break
D TCEngineConfig:
D inputPath: H:/VIDEO_TS
D outputPath: E:/CloneDVDTemp/VIDEO_TS
D replacementVOBsPath: C:\Program Files\Elaborate Bytes\CloneDVD2\eraser
D CloneConfig:
D targetVOBBlocks: 2288777
D remux: 0
D noStreams: 0
D RemasteringConfig:
D TitleConfig:
D title: 1
D angle: 1
D streams.audio: 00000001
D streams.subpicture: 00000000000000000000000000000000
D firstPlay: 0
D menus: 1
D supportStreamAutoSelection: 1
D filterUnreferredCells: 1
D tcArgs:
D samples: 5
D stats: 0
D scanOnly: 0
D pictureExtraction: 1
D DVDCompilerConfig:
D ecc: 0

i took out alot of the middle stuff to post the begining and end of the log.

D 12.2695148: remuxing forced: TC 7 1 014f0bee
D 12.2695403: remuxing forced: TC 7 1 014f0bee
D 12.2695552: remuxing forced: TC 7 1 014f0bee
E 08:17:26 Processing stopped: unexpected error
D Error details: Clone 1 TCE
 
CincyRob said:
i get the same kind of error trying to use clonedvd2. i am able to rip it with anydvd, and am useing dvdrebuilder but i cant get clonedvd2 to burn this, or i should say create the files to burn it. here is the log from clonevd2


I 08:08:23 Processing started
D CloneDVDVersion: 2.9.2.2
D Layer break removed at 1 locations
I 08:08:23 Successfully removed layer break
D TCEngineConfig:
D inputPath: H:/VIDEO_TS
D outputPath: E:/CloneDVDTemp/VIDEO_TS
D replacementVOBsPath: C:\Program Files\Elaborate Bytes\CloneDVD2\eraser
D CloneConfig:
D targetVOBBlocks: 2288777
D remux: 0
D noStreams: 0
D RemasteringConfig:
D TitleConfig:
D title: 1
D angle: 1
D streams.audio: 00000001
D streams.subpicture: 00000000000000000000000000000000
D firstPlay: 0
D menus: 1
D supportStreamAutoSelection: 1
D filterUnreferredCells: 1
D tcArgs:
D samples: 5
D stats: 0
D scanOnly: 0
D pictureExtraction: 1
D DVDCompilerConfig:
D ecc: 0

i took out alot of the middle stuff to post the begining and end of the log.

D 12.2695148: remuxing forced: TC 7 1 014f0bee
D 12.2695403: remuxing forced: TC 7 1 014f0bee
D 12.2695552: remuxing forced: TC 7 1 014f0bee
E 08:17:26 Processing stopped: unexpected error
D Error details: Clone 1 TCE
Click to expand...
Looks like AnyDVD isn't decrypting correctly. Please post an AnyDVD logfile. Thank you.

EDIT:
And maybe you want to update CloneDVD2, too.
 
Version 2.9.2.2 is very outdated. Please upgrade to the newest version of AnyDVD & CloneDVD and post a log from both programs. See here for how.
 
well i do have the newest anydvd update. 6.6.6.0./i did just get the newest clonedvd2, 2.9.2.8 and that seems to have worked.
thats weird i got the email for anydvd update but not for clone? maybe it was for both seeing they came out on the same day. will have to look at email again..
thanks alot.
 
CincyRob said:
well i do have the newest anydvd update. 6.6.6.0./i did just get the newest clonedvd2, 2.9.2.8 and that seems to have worked.
thats weird i got the email for anydvd update but not for clone? maybe it was for both seeing they came out on the same day. will have to look at email again..
thanks alot.
Click to expand...

The programs offer an automatic update check. You should consider enabling it.
 
Well, well. Somehow i must have overlooked the new clone version too. It works now.

I am sorry. I feel like a real noob now. :eek:

@ Clams: Do you remember me now? I have seen your name somewhere else too. :p
 
sheep said:
@ Clams: Do you remember me now? I have seen your name somewhere else too. :p
Click to expand...


Kinda... but I think I was thinking of someone else too.
Glad all is well!!!

-W
 
You must log in or register to reply here.
Back
Top