saw 4/ mr woodcock

Discussion in 'AnyDVD HD (DVD issues)' started by dennyd, Jan 22, 2008.

  1. dennyd

    dennyd Member

    cannot back up either any ideas?
     
  2. BenGurion

    BenGurion Well-Known Member

    pls poste where it belongs :policeman:
     
  3. Webslinger

    Webslinger Retired Moderator



    1. Use Anydvd 6.3.1.1 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6311.exe

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    (If you use something other than Clonedvd, right click the red fox icon on your toolbar-->select "rip video-dvd to haddisk" . . . after you can import that rip into whatever you want)

    3. Use the latest Clonedvd beta: click
    http://forum.slysoft.com/showpost.php?p=83249&postcount=1

    4. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    5. If you still have problems, then . . .

    A) a) Ensure Anydvd is running.
    b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?
     
    Last edited: Jan 23, 2008
  4. dennyd

    dennyd Member

    just curious what does removing title 25 do?
     
  5. Webslinger

    Webslinger Retired Moderator

    It removes a bogus titleset (copy protection) that would otherwise cause a problem if you used older versions of Anydvd.
     
    Last edited: Jan 23, 2008
  6. Webslinger

    Webslinger Retired Moderator

  7. ka1esg

    ka1esg New Member

    Thanks for info. The fix for Saw IV worked for me.

    Sonny
     
  8. pepper5127

    pepper5127 New Member

    saw 4

    I unchecked chapter 25 and the movie saw 4 copied for for the hep webslinger
     
  9. Webslinger

    Webslinger Retired Moderator

  10. e143slime8

    e143slime8 Well-Known Member

    Just a note from me:

    This morning I was unable to back up "Saw IV Unrated" version.

    Using: Anydvd 6.3.0.9 with CloneDVD 2 v. 2.9.1.4, would not back up, getting cyclacy redundancy (sp?) errors. Not sure of the exact error message.

    I did a search on these forums for "Saw IV" or "Saw 4" but could not find a post.

    I then checked AfterDawn forum which pointed me to DVDFab 4 Platinum. Tried that and it worked, full back up.

    I have now returned here and find the 6.3.1.1 beta posts. D/L that version and now successful using CloneDVD in backing up Saw IV.

    Nice work!
     
  11. Webslinger

    Webslinger Retired Moderator

    You need to remove title 25 in Clonedvd if you use Anydvd 6.3.0.9

    But it's better to use Anydvd 6.3.1.1, since you don't need to remove anything in Clonedvd.
     
  12. icedog31

    icedog31 Active Member

    I had the same problem with SawIV but after i downloaded the latest version,6.3.1.1 it worked perfectly.Thanks slysoft!