Hallo plato,
ich bin Deinen Anweisungen gefolgt und habe zunächst einmal die DMA-Einstellungen nach der Anleitung vorgenommen - allerdings weichen meine Einstellungen auch nach Änderung etwas vom Bild 6 der Anleitung ab, und zwar wie folgt:
Bei Gerät 0 steht bei mir unter "Aktueller Übertragungsmodus" nicht wie dort angeführt "Ultra-DMA-Modus 2" sondern "...Modus 5"
und bei Gerät 1 steht bei mir unter "Aktueller Übertragungsmodus" "PIO-Modus"
Nach dieser Einstellung habe ich dann versucht, mit Nero 7 eine Brennsimulation vorzunehmen, und zwar zunächst mit deneinzelnen Video-Dateien. Nero 7 gab mir dann den Hinweis, dass ich zwei Möglichkeiten habe a) mit Recorder und b) mit meinem LG-Brenner. Ich entschied mich dann für meinen LG-Brenner und bekam dann den Hinweis, dass eine Simulation nicht möglich sei.
Habe dann den Recorder gewählt, und die Simulation lief einwandfrei. Die anschließende Übertragung mit dem Image-Recorder von Nero 7 auf meine DVD+R DL in meinem LG-Brenner GSA-4120B funktionierte dann allerdings wiederum nicht und die DVD war umsonst geopfert.
Habe nochmals die von Nero 7 gefertigte Log-Datei hier beigefügt
Rubberduck
xx
1C80-002M-19E5-M22X-4021-84XM-****
1A41-0000-0000-2549-3452-****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32
NT-SPTI used
Nero Version: 7.5.0.2
Internal Version: 7, 5, 0, 2
Recorder: <HL-DT-ST DVDRAM GSA-4120B>Version: A115 - HA 1 TA 3 - 7.5.0.2
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-C2502>Version: 1D13 - HA 1 TA 0 - 7.5.0.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS548080M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-C2502 atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : TEAC CD-W216E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-C2502 D: CDRom0
TEAC CD-W216E E: CDRom1
Generic DVD-ROM F: CDRom2
HL-DT-ST DVDRAM GSA-4120B G: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572280kB)
Free physical memory: 640MB (656084kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.8.2009
DVD-Image brennen
12:00:34 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
12:00:34 #2 Text 0 File Reader.cpp, Line 126
Reader running
12:00:34 #3 Text 0 File Writer.cpp, Line 123
Writer G: HL-DT-ST DVDRAM GSA-4120B running
12:00:34 #4 Text 0 File Burncd.cpp, Line 3436
Turn on Disc-At-Once, using DVD media
12:00:34 #5 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3271694 (727:02.44, 6390MB)
12:00:34 #6 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)
12:00:34 #7 Text 0 File DlgWaitCD.cpp, Line 2824
Recorder: HL-DT-ST DVDRAM GSA-4120B, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: MBIPG101, Media Type ID: R10, Product revision number: 65
Disc Application Code: 0, Extended Information Indicators: 3
12:00:34 #8 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:00:34 #9 Text 0 File ThreadedTransferInterface.cpp, Line 862
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 3271695 (3271695) = #3271695/727:2.45
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3271695 blocks [G: HL-DT-ST DVDRAM GSA-4120B]
--------------------------------------------------------------
12:00:34 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1075
Prepare recorder [G: HL-DT-ST DVDRAM GSA-4120B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6700431360, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3271695 | lead-out | 1 | 0x41 | 0x00
12:00:34 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:00:34 #12 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5.540 KB/s)
12:00:34 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2731
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
12:00:34 #14 Text 0 File DVDPlusDualLayer.cpp, Line 470
Disc finalized, LBA total Image size: 3271695 (6390MB), Last LBA L0: 1635855 (3195MB)
12:01:35 #15 Text 0 File DVDPlusDualLayer.cpp, Line 635
L0 Data Zone Capacity set to 1635856 (18F610h, 3195MB) -> OK, confirmed setting
12:01:35 #16 CDR -1205 File DVDPlusDualLayer.cpp, Line 662
Burning Layer 1
12:01:35 #17 Text 0 File DVDPlusDualLayer.cpp, Line 672
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
12:01:35 #18 Text 0 File Cdrdrv.cpp, Line 9176
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 1BF60F h (LBN: 18F60F h, 3195 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MBIPG101
Media type ID: R10
Product revision number: 65
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 03 4D 42 49 50 47 - 31 30 31 52 31 30 41 40 ...MBIPG101R10A@
25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
12:01:35 #19 Text 0 File DVDR.cpp, Line 6032
Drive: HL-DT-ST DVDRAM GSA-4120B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
12:01:35 #20 CDR -1207 File DVDR.cpp, Line 5955
Book Type automatically set to: DVD-ROM
12:01:35 #21 Text 0 File DVDPlusRW.cpp, Line 661
Start write address at LBA 0
DVD high compatibility mode: No
12:02:09 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 291
G: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 02 20 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 35 2D 00 0E 0C
Buffer x0bbf0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
12:02:09 #23 CDR -1135 File Writer.cpp, Line 312
Write error
G: HL-DT-ST DVDRAM GSA-4120B
12:02:09 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:02:09 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:02:09 #26 SPTI -1135 File SCSIPassThrough.cpp, Line 291
G: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 2D 00 0E 0C
12:02:09 #27 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
12:02:47 #28 CDR -1135 File WriterStatus.cpp, Line 167
Write error
G: HL-DT-ST DVDRAM GSA-4120B
12:02:47 #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
12:02:47 #30 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5.540 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 05.10.2006 04:42:42
File 'Drivers\PXHELP20.SYS': Ver=3.00.67a, size=43872 bytes, created 23.02.2008 04:38:33 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Schließlich habe ich dann noch die Log-Datei der DVD durch AnyDVD erstellt, die ich Dir gerne zusenden würde, aber ich finde hier nirgendwo die Büroklammer, um die Datei als "Anhang" beizufügen.
Wie kann ich Dir diese Datei zukommen lassen?
Gruß
Gecko13
P.S: Habe soeben einen Versuch noch mit einer anderen DVD gemacht (Twilight Biss zum Morgen) - auch hier leider das gleiche Problem. Soll es jetzt vielleicht an meinem Brenner liegen? Hat doch bisher im gut gebranndt.???