pixellated problem chapters 9 and 10 with hairspray

Discussion in 'AnyDVD HD (DVD issues)' started by ashowstopper, Nov 21, 2007.

  1. ashowstopper

    ashowstopper Member

    Still the same BUP issues. I use 1clickDVD, and just ripping to Hard drive is the same bup issue. This one won't be resolved ...Until the fat lady sings!

    Attached Files:

  2. ashowstopper

    ashowstopper Member

    All "seems" ok, but chapters 9&10 pixilate. All others are ok. Those are the two chapters with the vob issues. So "some stuff is fixed" but NOT ALL.
  3. ashowstopper

    ashowstopper Member

    Check chapters 9 and 10. Mine are pixilated.
  4. Webslinger

    Webslinger Retired Moderator

    You appear to be the only person reporting this.

    1. Update your burner's firmware (if available)

    2. Use good quality media (Memorex, Ritek, Princo, Fuji, TDK from Costco, and Maxell that are not made in Japan are not good quality media). Are you using inferior blank media? If you're not using Taiyo Yuden Premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer is yes.
    If you use poor quality blank media, then you should expect problems.

    visit http://www.redflagdeals.com/forums/showpost.php?p=4764653&postcount=25

    3. Try lowering your burn speed a little (if you have a 16x burner and 16x rated media try writing to it at 12x or 8x instead of 16x)

    4. If you're using +R, +RW, or +R DL media, change the booktype to "dvd-rom"
    http://forum.slysoft.com/showthread.php?t=476 (step 3)

    5. Avoid sticker labels (they tend to cause problems)

    6. Try setting a custom size of 4300 in whatever burning program you're using (but if you're using good media, you shouldn't have to) if you're using regular single layer dvd-5 (4.7GB) discs.

    7. Download Nero cd-dvd speed. It's a free program. Select the tab labeled "scandisc". Insert the problematic backup disc, select the appropriate drive letter, and click "start". If Nero cd-dvd speed reports read errors, your backup is bad (which is the most likely case), your optical drive may be slowly dying, or your optical drive simply doesn't like the disc (or your choice of blank media)--even if the disc looks fine.

    Bad burn quality is notorious around the end of discs (see step 6)
    and also at layer breaks when using low quality DL media (use Verbatim +R DL media made in Singapore, and change the booktype to "dvd-rom")
  5. James

    James Redfox Development Team Staff Member

    What is a bup issue?
  6. Webslinger

    Webslinger Retired Moderator

    Do not post in multiple threads about the exact same thing.

    from http://forum.slysoft.com/showpost.php?p=39836&postcount=2

    26. With some discs, I get a weird .bup error message. Should I be worried?

    No. That message will be more common, and it doesn't really indicate anything other than the .bup file location does not correspond with the pointers in the .ifo files. This situation is fairly common now, and that message does not necessarily indicate that you will experience problems.
    Last edited: Nov 21, 2007
  7. Webslinger

    Webslinger Retired Moderator


    Uninstall Roxio's packet writing software, Drag to Disc, which conflicts with a number of different programs including some of Slysoft's. Ensure those entries no longer appear in your filters.

    Also, James is not a fan of AFS2k

    If you can't figure out how to remove these filters, do this:

    i) Create a backup of your registry
    ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "Cdr4_xp". Click "Remove Selected Filter". Select "Cdralw2k". Click "Remove Selected Filter". Select "AFS2k". Click "Remove Selected Filter". Click "ok".
    iv) Reboot

    It's better to uninstall the programs that installed those three filters, but if you can't figure out how, then follow the steps I listed. Please keep in mind the programs that installed those filters will no longer work properly.
  8. Webslinger

    Webslinger Retired Moderator

    Also, if you're using 1-click, rip to the hard drive first using Anydvd ripper (right click the red fox icon, and select "rip video dvd to harddisk"). Then use 1-click on that rip. And update to Anydvd beta
    Last edited: Nov 22, 2007