Newbie - problem/question

Discussion in 'CloneDVD' started by Robin12265, Mar 15, 2007.

  1. Robin12265

    Robin12265 New Member

    I'm new to burning DVD's and I got a read error on Toy Story - trying to make a back up copy since my son watches it SO much. Don't want to be without a copy! LOL

    I did read the sticky post, but it doesn't make any sense to me. Can someone please explain this in laymans terms?

    Here's the full error message:

    [​IMG]
     
  2. Robin12265

    Robin12265 New Member

    Per the "please read before posting"...

    1) latest version - check
    2) What is 'packet software'?
    3) version 2.9.0.3 CloneDVD2 and AnyDVD 6.1.3.0
    4) - not sure what all this is - hope this info is right - info from AnyDVD
    Summary for drive D: (AnyDVD 6.1.3.0)
    PHILIPS DVD+-RW DVD8801 4D28 VA155S61836340
    Drive (Hardware) Region: 1

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 1821952 sectors (3558 MBytes)
    Total size: 3547075 sectors (6927 MBytes)

    Video DVD (or CD) label: TSE0NNM1
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    DVD structure appears to be correct.
    Found & removed invalid VOBUs!
    Autorun not found on Video DVD.
    Bad sector protection not found.
    Emulating RPC-2 drive with region 1!​

    5) I think what you want here is PHILIPS DVD+-RW DVD8801 4D28 VA155S61836340and I have WinXP Media Center

    6) - again not sure if this is what you want RE dvd I'm writing to
    Nero CD-DVD Speed: Disc Info
    Basic Information
    Disc type: : DVD-R
    Book Type : DVD-R
    Manufacturer: : CMC
    MID : CMC MAG. AE1
    Write speeds: : 2.4 X - 4 X - 8 X
    Blank Capacity : 4.38 GB
    : 4489 MB
    : 4707321856 bytes
    Extended Information
    Layers : 1
    Usage : General
    Copyright protection : n/a
    Recorder information
    Disc Status : Empty
    Raw Data
    Pre-recorded Information in Lead-in (0Eh)
    0000 - 01 40 C1 FD 9E D8 52 00 02 55 0D 0E 88 9A 80 00 - .@....R..U......
    0010 - 03 43 4D 43 20 4D 41 00 04 47 2E 20 41 45 31 00 - .CMC.MA..G..AE1.
    0020 - 05 88 80 00 00 00 02 00 4F E5 D6 77 40 11 11 00 - ........O..w@...
    0030 - D9 8B D4 77 00 F0 FD 7F 40 11 11 00 00 11 11 00 - ...w....@.......
    0040 - BA C1 3D 77 F0 D0 87 00 00 00 00 00 00 00 00 00 - ..=w............
    0050 - 68 18 11 00 B8 17 11 00 CD 6D 10 10 D1 B3 00 00 - h........m......
    0060 - 38 11 11 00 34 87 D4 77 44 09 1E 00 76 04 00 00 - 8...4..wD...v...

    7) burning media at 6X (says up to 8X - but I've had best results at 6X with the two DVDs I burned previously

    8 ) posted that info above in #4

    9) error posted in OP

    I hope I've managed to answer the important questions since I really have NO CLUE what any of this means!

    Oh someone told me that my PHILIPS DVD+-RW DVD8801 is a Benq 1650 - whatever that means.
     
    Last edited: Mar 15, 2007
  3. Coaster

    Coaster Well-Known Member

    @ Robin12265,

    Welcome to the Forum.

    Concerning you Data Error (Cyclic Redundancy Check) CRC Error ->

    http://forum.slysoft.com/showthread.php?t=324

    Most likely your Data Error (Cyclic Redundancy Check) CRC Error is caused by the orginal Toy Story Comerical DVD Movie you are attempting to copy is dirty or scratched or contains a manufacture flaw.

    The blank DVD Media CMC MAGAE1 (usually Memorex) you are using is noted to be absolutely garbage blank DVD Media. Informed knowledgeable individuals avoid using Memorex CMC Magnetic Taiwan Media because of well-documented history of poor problematic performance. Suggest for consistent quality error free results use known proven blank DVD Media such as Taiyo Yuden or Verbatim Media.

    Regards,
    Coaster
     
    Last edited: Mar 15, 2007