My problem Mr Woodcock

Discussion in 'CloneDVD' started by freeman56, Jan 15, 2008.

  1. freeman56

    freeman56 New Member

    I also am having problems, cant get past the error message. Any one getting results?
     
  2. Webslinger

    Webslinger Retired Moderator

    Yes, several people have. Please do not post about problems you're having in other people's troubleshooting threads, as this makes troubleshooting very difficult. Create your own thread instead. Click http://forum.slysoft.com/announcement.php?f=20 and read fully

    Charlie isn't getting an error message.

    1. Use Anydvd 6.3.0.9 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6309.exe

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. Use the latest Clonedvd beta: click
    http://forum.slysoft.com/showpost.php?p=81170&postcount=1

    4. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    5. If you still have problems, then . . .

    A) a) Ensure Anydvd is running.
    b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?
     
    Last edited: Jan 15, 2008
  3. KCSPCT

    KCSPCT Member