Mr. Woodcock connection problems

Discussion in 'CloneDVD' started by Badram4x4, Jan 23, 2008.

  1. Badram4x4

    Badram4x4 New Member

    I am getting this when visiting the link you posted. I too cannot backup Mr Woodcock.


    The connection was reset

    The connection to the server was reset while the page was loading.



    * The site could be temporarily unavailable or too busy. Try again in a few
    moments.

    * If you are unable to load any pages, check your computer's network
    connection.

    * If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
     
  2. Webslinger

    Webslinger Retired Moderator

    Do not post in other people's troubleshooting threads unless you want to help them please (and that person is no longer having a problem after following my instructions). click http://forum.slysoft.com/announcement.php?f=18 and read fully

    What link?

    Follow the steps, please (in order):

    1. Use Anydvd 6.3.1.1 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6311.exe

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. Use the latest Clonedvd beta: click
    http://forum.slysoft.com/showpost.php?p=83249&postcount=1

    4. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    5. If you still have problems, then . . .

    A) a) Ensure Anydvd is running.
    b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?
     
  3. Charlie

    Charlie Well-Known Member

    What link?