mabe the same dvd problem

[redclay]

I had received a few DVDs for Christmas and was backing them up when I came upon a problem. I was trying to back up rush hour three and the kingdom and Shattered
I tried on office depot +RW disk and the dynex –r 16x disk with the same result, it works on my computer and another new dvd player in the house but not my Denex system that is three years old. I tried several times with both disk and changing write speeds and dvd5 to DVD r-+ selections. i am useng Vista prem.





Summary for drive E: (AnyDVD 6.3.0.3)
MATSHITA DVD-RAM UJ-850S 1.61 70106UKMERC00120235
Drive (Hardware) Region: 1

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 1936336 sectors (3781 MBytes)
Total size: 3643178 sectors (7115 MBytes)

Video DVD (or CD) label: RUSH_HOUR_3
Media is CSS protected!
Video Standard: NTSC
Media is locked to region(s): 1!

Warning: .bup file location is wrong, .bup processing disabled!
RCE protection not found.
Found & removed structural copy protection!
Found & removed invalid cell pieces!
Repaired invalid title search pointer table!
Found & removed bogus title set(s)!
Found & removed invalid VOBUs!
UDF filesystem patched!
Found & removed Autorun from Video DVD!
Found & removed 5 potential bad sector protections!
Emulating RPC-2 drive with region 1!

 

[Webslinger]

I had received a few DVDs for Christmas and was backing them up when I came upon a problem. I was trying to back up rush hour three and the kingdom and Shattered
I tried on office depot +RW disk and the dynex –r 16x disk with the same result, it works on my computer and another new dvd player in the house but not my Denex system that is three years old. I tried several times with both disk and changing write speeds and dvd5 to DVD r-+ selections. i am useng Vista prem.

You do not have the same problem at all.

1. Click http://forum.slysoft.com/announcement.php?f=20 and read fully

2. from Frequently Asked Questions (READ BEFORE YOU POST)



10. My backups play on my computer or standalone dvd player, but not in something else. Why?

First, if the backup is playing in a standalone dvd player or on your computer that means Clonedvd worked.

The most common reason why you're having this problem (if the backup doesn't work in a standalone dvd player) is due to a compatibility issue between the blank media you're using and whatever you're using to play the backup in (standalone dvd player, for example). Basically your dvd player, dvd-rom drive, etc. doesn't like the blank media you're using (or if you're using +R media, you didn't change the booktype to "dvd-rom"). You can try choosing other blank media (+r instead of -r, for example, and change the booktype to "dvd-rom")--or buy a different standalone dvd player (or a different dvd-rom drive, burner, etc.).

If you're using dvd-r media and your standalone dvd player gives you a message similar to ""Play Prohibited, please check disc", use dvd+r media instead and change the booktype to "dvd-rom" (see "b)" below).

a) Are you using junk blank media? If you're not using Taiyo Yuden 8x premium, Verbatim, Maxell Plus, or Maxell Broadcast Quality, then chances are the answer to this question is "yes".
b) Click this and read FULLY (especially take a look at point 4 for more information on bitsetting/booktyping, but all points are very important)

The same factors also apply to why the backup doesn't play in your computer (but there can be other factors including buggy or poorly installed dvd player software, bad drivers, etc.).

It's also possible the playback device/player that can't play the disc is slowly dying.