What is wrong I have all the new updates of Any DVD And CLone DVD 2. I can not get Babel or flushed away to copy, no matter what I do any IDeas please help!!!!
PLease HELP ME!!! I am having so much trouble with Babel and Flushed Away. I have alll new updated software and I tried taking everything extra off except the movie nothing works. PLease give me some help. I didn't have any problem with The Prestige. Thanks
Do not create multiple threads on the exact same topic please. You have not provided enough information. You need to answer these questions: http://forum.slysoft.com/showthread.php?t=321
No problem. Please answer these questions so we can help you further: http://forum.slysoft.com/showthread.php?t=321 (especially # 8 and 9)
Help 1. Using anydvd 6.1.2.5 and Clone DVD2 2.9.0.3 4. Babel and Flushed Away released Feb.20th- both new dvds 5. Emachine 6.Memorex DVD+R 7.6X 8.Summary for drive E: (AnyDVD 6.1.2.5) HL-DT-ST DVD+-RW GSA-H21N 1.00 06/07/28 Drive (Hardware) Region: 1 Media is a Data DVD. Booktype: dvd-rom (version 1), Layers: 2 (opposite) Size of first Layer: 2021184 sectors (3947 MBytes) Total size: 4042358 sectors (7895 MBytes) Video DVD (or CD) label: BABEL_DOMESTIC Media is CSS protected! Video Standard: NTSC Media is locked to region(s): 1! Found & removed RCE protection! DVD structure appears to be correct. Structural copy protection not found. Changed firstplay: Jump directly to Title 1! Autorun not found on Video DVD. Bad sector protection not found. Emulating RPC-2 drive with region 1! 9.E:/ VIDEO_TS/VTS_12_0.VOB:READ ERROR DATA ERROR(CYCLE REDUNDANCY CHECK) IF READING THE MATERIAL HAS FAILED PLEASE CLEAN SURFACE AND TRY AGAIN.
Ok, read http://forum.slysoft.com/showthread.php?t=324 please The CRC errors mean the original discs are likely bad and either need to be cleaned or replaced (even if they look fine and play on a standalone player fine). They could also be scratched. This is not related, but I would switch to better blank media visit http://www.redflagdeals.com/forums/showthread.php?p=3976250 I am now going to look for a firmware update for your burner.
That LG GSA-H21N burner you have is an OEM drive, and it's not directly supported by LG. The date of your firmware corresponds to the latest firmware I found at HP's website, so it seems you are up to date. I can only recommend cleaning the discs or asking for an exchange. They appear to be suffering from quality control issues or damage-or possibly your reader is dying. This is why you are receiving CRC errors. Also here's a burning guide to Clonedvd2, which I recommend you read fully: http://forum.slysoft.com/showthread.php?t=476 (especially step 3).
Thank you, I cleaned flushed away seems to be working so far up to 24% now, Bael is clean but still won't burn I will ask for an exchange and see how that goes, Thankyou for your time