Help!!! I'm now getting D:/VIDEO_TS/VTS_071.VOB:read error (Sector Reader)

[amiles1]

I've recently started getting the above error code when I try and covert various DVD's. They are all in pristine condition and I have no idea what is happening. Please can someone help??!?!

 

[Hawk]

Do you get this with all movies or specific ones. Either way it may be your reader or drive is going bad, this is especially true if all movies cause this.

Also for more comprehensive analysis post anydvd log file for disc you have problem.

 

[amiles1]

Do you get this with all movies or specific ones. Either way it may be your reader or drive is going bad, this is especially true if all movies cause this.

Also for more comprehensive analysis post anydvd log file for disc you have problem.

I just upgraded my system in the last week. Prior to the upgrade it was working perfectly, afterwards it worked for a few and then since has just rejected anything I try. The only thing not upgraded was the optical drive as I had no reason to think it needed it.

I've just got home and tried to do another and as expected it failed so I have copied below the error text. I was assuming that it was a software glitch as I had to reinstall all of the slysoft software again.....

This is Chameleon transcoder engine [2.0.0.4] (09/07/2012)
LOG: [NEW SEGMENT] VOB:1 CELL:1
LOG: MPEG2_SEQUENCE_EXTENSION:#188 // V:0, A:0, S:0 // __ensure( get32(Data, Offset) == 0x000001B5 & get8(Data, Offset + 4) >> 4 == 1 )

 

[amiles1]

I just upgraded my system in the last week. Prior to the upgrade it was working perfectly, afterwards it worked for a few and then since has just rejected anything I try. The only thing not upgraded was the optical drive as I had no reason to think it needed it.

I've just got home and tried to do another and as expected it failed so I have copied below the error text. I was assuming that it was a software glitch as I had to reinstall all of the slysoft software again.....

This is Chameleon transcoder engine [2.0.0.4] (09/07/2012)
LOG: [NEW SEGMENT] VOB:1 CELL:1
LOG: MPEG2_SEQUENCE_EXTENSION:#188 // V:0, A:0, S:0 // __ensure( get32(Data, Offset) == 0x000001B5 & get8(Data, Offset + 4) >> 4 == 1 )

This is Chameleon transcoder engine [2.0.0.4] (09/07/2012)
LOG: [NEW SEGMENT] VOB:1 CELL:1
LOG: [NEW CELL] VOB:1 CELL:2
LOG: [NEW CELL] VOB:1 CELL:3
LOG: [NEW CELL] VOB:1 CELL:4
LOG: segment without audio, from 0 to 450000 (450000) ; increasing audio filler to 450000
LOG: [NEW SEGMENT] VOB:2 CELL:1
FFmpeg version from svn, Copyright (c) 2000-2008 Fabrice Bellard, et al.

NOTICE: This app contains changes made by SlySoft Inc. in compliance with GPL.
All changes are available as patches from http://oss.slysoft.com

This file was digitally signed by SlySoft Inc.

FFmpeg maintainers receive SlySoft products free of charge. If you're
interested then please contact us at support@slysoft.com


Seems stream 0 codec frame rate differs from container frame rate: 50.00 (50/1) -> 25.00 (25/1)
Input #0, cham, from 'pipe:':
Duration: N/A, start: 0.040000, bitrate: 9800 kb/s
Stream #0.0: Video: mpeg2video, yuv420p, 720x576 [PAR 64:45 DAR 16:9], 9800 kb/s, 25 tbr, 90k tbn, 50 tbc
[NULL @ 00b98050]Unknown option 'vb'
[swscaler @ 00337e10]Unknown option 'vb'
[libx264 @ 00c3aa80]using SAR=1/1
[libx264 @ 00c3aa80]frame MB size (80x45) > level limit (1620)
[libx264 @ 00c3aa80]DPB size (3 frames, 4147200 bytes) > level limit (2 frames, 3110400 bytes)
[libx264 @ 00c3aa80]MB rate (90000) > level limit (40500)
[libx264 @ 00c3aa80]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2
[libx264 @ 00c3aa80]profile Baseline, level 3.0
Output #0, ipod, to 'F:\itunes\Home Videos\The Inbetweeners 2.m4v':
Stream #0.0: Video: libx264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], q=2-31, pass 1, 4725 kb/s, 25 tbn, 25 tbc
Stream mapping:
Stream #0.0 -> #0.0
frame= 41 fps= 0 q=4.0 size= 3kB time=1.36 bitrate= 19.1kbits/s dup=0 drop=0
frame= 82 fps= 82 q=2.0 size= 4kB time=3.00 bitrate= 10.3kbits/s dup=0 drop=0
frame= 124 fps= 82 q=2.0 size= 4kB time=4.68 bitrate= 7.7kbits/s dup=0 drop=0
frame= 137 fps= 17 q=2.0 size= 5kB time=5.20 bitrate= 7.2kbits/s dup=0 drop=0
frame= 178 fps= 21 q=2.0 size= 5kB time=6.84 bitrate= 6.2kbits/s dup=0 drop=0
frame= 199 fps= 18 q=2.0 size= 2333kB time=7.68 bitrate=2489.0kbits/s dup=0 drop=0
frame= 233 fps= 20 q=8.0 size= 6784kB time=9.04 bitrate=6147.6kbits/s dup=0 drop=0
frame= 268 fps= 22 q=15.0 size= 9160kB time=10.44 bitrate=7187.8kbits/s dup=0 drop=0
frame= 304 fps= 24 q=16.0 size= 10436kB time=11.88 bitrate=7196.0kbits/s dup=0 drop=0
frame= 339 fps= 26 q=17.0 size= 11362kB time=13.28 bitrate=7008.7kbits/s dup=0 drop=0
frame= 343 fps= 22 q=17.0 size= 11450kB time=13.44 bitrate=6979.2kbits/s dup=0 drop=0
frame= 382 fps= 24 q=17.0 size= 12131kB time=15.00 bitrate=6625.1kbits/s dup=0 drop=0
frame= 413 fps= 25 q=21.0 size= 13080kB time=16.24 bitrate=6597.8kbits/s dup=0 drop=0
frame= 426 fps= 24 q=22.0 size= 13397kB time=16.76 bitrate=6548.1kbits/s dup=0 drop=0
frame= 438 fps= 23 q=23.0 size= 13687kB time=17.24 bitrate=6503.7kbits/s dup=0 drop=0
frame= 458 fps= 20 q=19.0 size= 14217kB time=18.04 bitrate=6456.1kbits/s dup=0 drop=0
All finished. Thank you and bye bye.

 

[Recycle]

Where is the Log file????