Error 1

Discussion in 'AnyDVD HD (DVD issues)' started by shelley1101, Jun 3, 2008.

  1. shelley1101

    shelley1101 New Member

    When I try to backup my DVDs I am using 1ClickDVD, I insert my movie 1Click scans it but then I get "Error 1 DVD is encrypted". I have the newest version of AnyDVD and when click on the status tab it shows my movie. Help what is wrong.

  2. Webslinger

    Webslinger Retired Moderator

    1. Disable CPRX in 1-Click.

    2. Ensure you're using the latest version of 1-click.

    3. Use Anydvd click

    You may need to reboot after installing if prompted to do so.

    4. Click the red fox icon on your toolbar. Click "default". Click "ok".

    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG] (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"
    n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at
  3. shelley1101

    shelley1101 New Member

    I did steps 1 thru 4 and sitll got the Error 1 here is the file I hope I did it correctly. Thank you


    Attached Files:

  4. Webslinger

    Webslinger Retired Moderator

    Right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into 1-Click.

    Should you require further assistance, since the error message is coming from 1-Click (and I have no idea what "Error 1" means, since I'm not familiar with 1-Click--nor am I sure what would conditions would trigger that message in 1-Click), I recommend posting in 1-Click's forums: visit

    There are some filters that I might suggest you might try to remove (in addition to possible enable "safe mode" in Anydvd), but I would need to know what the people from 1-Click say about that error message.
    Last edited: Jun 7, 2008