Cannot copy Avatar

[vader1701]

I have the latest versions and have no problems with any other movie except this one, it just keeps on scanning it tried 3 different DVD's 2 from Netflix and 1 from Walmart.

Any idea's?

 

[Ch3vr0n]

yes, post an anydvd logfile so we can see what the problem is.

 

[vader1701]

It never gets that far it just scans, I will try again.

 

[Harrigan46]

It never gets that far it just scans, I will try again.

Create a log file of an empty drive then...

 

[vader1701]

Here is what the scan results are:

Summary for drive E: (AnyDVD 6.6.8.0)
HL-DT-ST DVD+-RW GSA-H73N C106 08/02/11 7U02
Drive (Hardware) Region: 0 (not set!)

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2041392 sectors (3987 MBytes)
Total size: 4048035 sectors (7906 MBytes)

Video DVD (or CD) label: AVATAR
Media is CSS protected!
Media is locked to region(s): 1!
Video Standard: NTSC

Found & removed structural copy protection!
Found & removed invalid cell pieces!
Found & removed bogus title set(s)!
Found & removed invalid VOBUs!
Found & removed RCE protection!
UDF filesystem patched!
Autorun not found on Video DVD.
Removed CSS copy protection!
Found & removed 10 potential bad sector protections!
Emulating RPC-2 drive with region 1!

 

[Harrigan46]

Here is what the scan results are:

Summary for drive E: (AnyDVD 6.6.8.0)
HL-DT-ST DVD+-RW GSA-H73N C106 08/02/11 7U02
Drive (Hardware) Region: 0 (not set!)

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2041392 sectors (3987 MBytes)
Total size: 4048035 sectors (7906 MBytes)

Video DVD (or CD) label: AVATAR
Media is CSS protected!
Media is locked to region(s): 1!
Video Standard: NTSC

Found & removed structural copy protection!
Found & removed invalid cell pieces!
Found & removed bogus title set(s)!
Found & removed invalid VOBUs!
Found & removed RCE protection!
UDF filesystem patched!
Autorun not found on Video DVD.
Removed CSS copy protection!
Found & removed 10 potential bad sector protections!
Emulating RPC-2 drive with region 1!

That's not a log file...
Right Click on the red fox>>Select create a log file>>From the folder that it is created in attach this zip file to your post.

 

[vader1701]

Ok it wanted to copy here is the Oh No fail details:

File 1 E:/VIDEO_TS/VTS_05_1.VOB 30 TCSectorReader

 

[DrinkLyeAndDie]

Your DVD drive region isn't set. Set it.

• Right click the fox on your system tray. Exit Anydvd
• Click start. Right click on "My computer"--->select "properties".
• Click on the 'Hardware' tab--->click the 'device manager' button.
• Open the dvd/cdrom branch---> right click on your optical drive
• Click "properties".
• You should have a region tab. From there you can select a region.
• Select the region that you're in
• Start Anydvd

After setting the drive region try again and see if you can create log files with the DVD in the drive. Attach the ZIP file to your reply.

I am unaware of any Avatar SD DVD releases for Region 1 using structural protections. IMHO, your problem is likely due to the inability of AnyDVD to obtain titlekeys because you didn't set your drive region. The File 1 error is a read error likely also caused by the problem obtaining titlekeys.

This isn't a CloneDVD issue and it likely isn't an AnyDVD either. Nonetheless, set the drive region and go from there.

 

[vader1701]

ok here is the zip log file

 

[Clams]

Just for giggles - can you post a logfile from as disk that DOES work as well?

-W

 

[vader1701]

here ya go

 

[Clams]

I meant with a DVD in the drive - a DVD that AnyDVD works OK with.
You just uploaded another Empty drive log.

-W

 

[vader1701]

This was with a dvd in the drive that I can copy, it already scanned it and was ready to copy...

 

[Clams]

Then you uploaded the wrong logfile.... EMPTY_DRIVE.zip

A logfile with a real DVD involved, has the name of the DVD for the title.

Like this one for Eyeborgs.....