CCaptain00
Active Member
Thread Starter
- Joined
- Nov 25, 2015
- Messages
- 44
- Likes
- 7
Max luma isnt the same thing as ''mastering display luminance''.
the Mastering display luminance is automatically set in the master display line (VUI tab):
View attachment 40731
CRF 17 medium preset is good setting for encoding UHD-BD. take 16 to 20 hours on my i7 7700kJust curious what x265 10bit CRF (Quality) value everyone is using as a staring point for UHD rips. 20? 22? Medium preset or slow? I will probably stick with a medium as slow takes my 6700k 20+ hrs.
Hello, I'm newbie to Staxrip encoding and I'm stuck with HDR to HDR encoding. When I load my HDR test file my VUI tab is empty.
Nothing is set automatically (am I doing something wrong?). If I have to set everything manually how to determine what values to write in
"Master Display" row?
View attachment 40769
Media info from my test file:
Color primaries : BT.2020
Transfer characteristics : PQ
Matrix coefficients : BT.2020 non-constant
Mastering display color primar : R: x=0.680000 y=0.320000, G: x=0.265000 y=0.690000, B: x=0.150000 y=0.060000, White point: x=0.312700 y=0.329000
Mastering display luminance : min: 0.0050 cd/m2, max: 4000.0000 cd/m2
Maximum Content Light Level : 500 cd/m2
Maximum Frame-Average Light Le : 200 cd/m2
Does it always have to be:
G(13250,34500)B(7500,3000)R(34000,16000)WP(15635,16450)L(40000000,50)?
Hello, I'm newbie to Staxrip encoding and I'm stuck with HDR to HDR encoding. When I load my HDR test file my VUI tab is empty.
Nothing is set automatically (am I doing something wrong?). If I have to set everything manually how to determine what values to write in
"Master Display" row?
View attachment 40769
Media info from my test file:
Color primaries : BT.2020
Transfer characteristics : PQ
Matrix coefficients : BT.2020 non-constant
Mastering display color primar : R: x=0.680000 y=0.320000, G: x=0.265000 y=0.690000, B: x=0.150000 y=0.060000, White point: x=0.312700 y=0.329000
Mastering display luminance : min: 0.0050 cd/m2, max: 4000.0000 cd/m2
Maximum Content Light Level : 500 cd/m2
Maximum Frame-Average Light Le : 200 cd/m2
Does it always have to be:
G(13250,34500)B(7500,3000)R(34000,16000)WP(15635,16450)L(40000000,50)?
there is an option to hardcode SRT subtitles but i never tried it.
Will Staxrip hard code subtitles in 10bit color? Ripbot264 won't do this currently and I'm researching avisynth plugins to try and find a workaround.
- No it varies.
I this problem at first too. I am at work now so I can't tell you tell exact steps. But what I did is to change the source under filters to FFVideoSource and change the encoder from x264 to x265 BEFORE loading the source video. Then it will populate. I think under "Project" I selected Manual workflow. I then changed the source to FFVideoSource (right click on it), selected to crop, then set up my x265 settings. I then saved the project as UHD 10bit HDR (os something like that) and set is as my default. Do this before loading the video source and the VUI will populate. You can even enter the 1023 for Max Luma and save it with that value. Hope that helps.
View attachment 40771
Let me know what you find out. I like to hard code or (burn in) foreign audio. The next encode I was going to do has I few lines of foreign audio on the third english sub track (not forced). But many movies have it on the same track (forced). I have been testing both Ripbot264 and Staxrip and I could find that option in Ripbot to hard code. Is it because I had 10 bit selected?
Just curious what x265 10bit CRF (Quality) value everyone is using as a staring point for UHD rips. 20? 22? Medium preset or slow? I will probably stick with medium as slow takes my 6700k 20+ hrs.
@CCaptain00
I tried your suggestion and everything is now set automatically under VUI tab except Maximum CLL and Maximum FALL.
Is that same with your setup or I have to do some more tweaking in Staxrip to get those values automatically?
View attachment 40782
Thanks.
Input Max CLL and Max FALL in manually with info from Mediainfo.
Maximum Content Light Level : 500 cd/m2
Maximum Frame-Average Light Le : 200 cd/m2
Thanks again @imhh1
Thanks for all your help CCaptain00.
So you have to put them manually too? I thought that maybe I was doing something wrong.
It's not problem to do it manually as long as the result is OK. Now I have onmedia info
so I was hoping you can help me with them (maybe you had similar situations).
Example 1:
Color range : Limited
Color primaries : BT.2020
Transfer characteristics : PQ
Matrix coefficients : BT.2020 non-constant
Mastering display color primar : R: x=0.680000 y=0.320000, G: x=0.265000 y=0.690000, B: x=0.150000 y=0.060000, White point: x=0.312700 y=0.329000
Mastering display luminance : min: 0.0000 cd/m2, max: 1000.0000 cd/m2
What to put for max CLL and max FALL in this case (since there is no data about that in info)? Do I just leave it on 0 (imhh1 actually wrote that on page 1 just would like confirmation)?
Example 2:
Color range : Limited
Color primaries : BT.2020
Transfer characteristics : PQ
Matrix coefficients : BT.2020 non-constant
What now? There isn't any info about mastering display color, luminance nor Max CLL Max FALL.
What to do in this case? What values do I put for Master Display in VUI tab? Nothing or...?
Hope you had such problem too and you can help me.
I tested it without Master Display setting and Without Max CLL & FALL and it looked OK but I want some confirmation from someone with more experience. Thanks.
Example 2:
Color range : Limited
Color primaries : BT.2020
Transfer characteristics : PQ
Matrix coefficients : BT.2020 non-constant
What now? There isn't any info about mastering display color, luminance nor Max CLL Max FALL.
What to do in this case? What values do I put for Master Display in VUI tab? Nothing or...?
Hope you had such problem too and you can help me.
I tested it without Master Display setting and Without Max CLL & FALL and it looked OK but I want some confirmation from someone with more experience. Thanks.
Handles or encodes Netflix hdr as wellyeah staxrip work very well. Avoid Handbrake, it trigger HDR but no complete 10bit pipeline unlike Staxrip.
View attachment 40728
yes leave it to 0, many movies have maxfall maxcll at 0
https://docs.google.com/spreadsheet...u4UI_yp7sxOVPIccob6fRe85_A/edit#gid=184653968
One more question. Can I change x265 version (in Staxrip 1.7 x265 version is 2.5 something) to newer one (latest is I think 2.6 something) in Staxrip and if I can how to do it?
Download here the latest test build:
https://github.com/stax76/staxrip/blob/master/changelog.md
Including "update: x265 2.6+3".
I've used it last night and it works fine.
I will post the results later. I'm at work now.