zoom

Discussion in 'AnyDVD HD (DVD issues)' started by dixie, Mar 18, 2008.

  1. dixie

    dixie Member

    i have tried to back up zoom but it got to 99% then said clonemap2. i was using fox to back up on pc . what does this mean ?
     

    Attached Files:

  2. Charlie

    Charlie Well-Known Member

    Drive (Hardware) Region: 0 (not set!)

    i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select region 1
    viii. Start Anydvd

    Your filters are fine.
     
  3. dixie

    dixie Member

    i changed the region and it still only goes to 99% then stops and says colemap2. what does that mean?
     
  4. dixie

    dixie Member

    i have tried to back up zoom but it keeps going to 99% then quits and says clonemap2. i did the region change like i was asked to but still the same. can someone please help
     
  5. Webslinger

    Webslinger Retired Moderator

    Do not create multiple threads about the exact same thing please.
    click http://forum.slysoft.com/showpost.php?p=87585&postcount=4 and read fully

    I've merged your other zoom threads into this one.

    1. Use Anydvd 6.4.0.0: click http://static.slysoft.com/SetupAnyDVD6400.exe

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. Update to Vista Service Pack 1: click http://forum.slysoft.com/showthread.php?t=14745

    4. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

    You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.


    5. Use the latest Clonedvd: click http://forum.slysoft.com/showpost.php?p=84511&postcount=1

    6. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327


    7. If you still have problems, then . . .

    A)
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG] (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"
    n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    C) Click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered
     
    Last edited: Mar 19, 2008