writedvd 10 11 w2

Discussion in 'CloneDVD' started by best1973, Feb 24, 2008.

  1. best1973

    best1973 New Member

    Hello all,
    I am having the same error code for absolutly no reason. I have recently updated my mainboard (asus) to an 2.40 gigahertz Intel Core2 Quad Q6600, (Vista Ultimate). I was able to backup one disk using the same media (Verbatim) DVD-R, I also use (JVC) DVD-R and I keep getting read error10 11 w2 and I have no other dvd reading program i.e roxio, nero, or anything of that sort. Could I please get some help as well. It would be very much appreciated.
  2. Webslinger

    Webslinger Retired Moderator

    Do not post in other people's troubleshooting threads unless you wish to assist them. click http://forum.slysoft.com/showpost.php?p=87585&postcount=4 and read fully please. Thank you


    from Frequently Asked Questions (READ BEFORE YOU POST)

    9. I'm getting Writedvd 10 11 W2 errors. Why?

    a) Are you using junk blank media? If you're not using Taiyo Yuden (not Valueline), Verbatim,, or Maxell Broadcast Quality, then chances are the answer to this question is "yes". Stay far away from Memorex, Princo, Ritek, regular Maxell, Fuji, etc. that are not made in Japan.
    b) Click this and read FULLY (because the same advice applies)
    c) Do you have Musicmatch Jukebox on your system? If so, click this
    d) Remove packet writing software from your system (including Directcd, Incd, drag to disc, DLA, etc.)
    e) Click this and read
    f) i) Ensure Anydvd is running.
    ii) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    iii) Right click the red fox icon on your toolbar.
    iv) Select "Create Logfile"
    v) Wait for Anydvd to create a log file.
    vi) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    vii) Go to your My Documents folder
    viii) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    ix) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    x) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    xi) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    xii) Click the "Browse" button, and locate and select the .zip file you created.
    xiii) click "upload"