Very slow encoding with an Omen laptop with GTX1060 MaxQ

Discussion in 'CloneBD' started by floreal13, Dec 22, 2021.

  1. floreal13

    floreal13 Member

    Hello, I have an issue with encoding Blueray very slow (4-5 fps) and at the same time my GPU is undersused at 10-15%.
    I have installed the latest Nvidia drivers.
    What could be the causes of this issue?
     
    Last edited: Dec 22, 2021
  2. coopervid

    coopervid Moderator

    Did you activate hardware de- and encoding? Look at the picture:

    upload_2021-12-22_11-1-16.png

    You need to activate CUDA on your Laptop in the settings.

    Please check and reply.
     
  3. floreal13

    floreal13 Member

    Yes I activated CUDA for Both
     
  4. coopervid

    coopervid Moderator

    Please post the equivalent picture that I posted.
     
  5. floreal13

    floreal13 Member

    here it is
    upload_2021-12-22_19-27-31.png
     
  6. coopervid

    coopervid Moderator

    Everything seems to be working. I also checked that this GPU should support NVENC. Please post a cbdlog file of a BD movie.
     
    whatever_gong82 likes this.
  7. floreal13

    floreal13 Member

    Where is this cbdlog file?
     
  8. Ch3vr0n

    Ch3vr0n Translator NL

    It's not created until you tell CloneBD to create one after the encoding is finished. It's a blue button on the final summary screen.
     
    whatever_gong82 likes this.
  9. coopervid

    coopervid Moderator

    BTW- if you are trying to downconvert to Bluray from UHD there is this bug in 1.2.9.2 that I documented here:
    https://forum.redfox.bz/threads/uhd-bluray-bug-in-1-2-9-2.80831/
     
  10. floreal13

    floreal13 Member

  11. Ch3vr0n

    Ch3vr0n Translator NL

    He links to use 1291 not 1281
     
  12. floreal13

    floreal13 Member

    OK my bad, I didn't tried 1.2.9.1, are the performance 10 times better between 1.2.8.1 and 1.2.9.1?
     
  13. Ch3vr0n

    Ch3vr0n Translator NL

    There's only 1 way to find out.
     
  14. coopervid

    coopervid Moderator

    Are you trying to downconvert? The bug is limited to that function.
     
  15. floreal13

    floreal13 Member

    Here is the log
     

    Attached Files:

  16. coopervid

    coopervid Moderator

    @Pete ,

    if you find some time - can you please have a look at the log file above? Thanks!