Using VISTA

Discussion in 'CloneDVD' started by flashnicky, Oct 31, 2007.

  1. flashnicky

    flashnicky New Member

    What is the secret to using DVD Clone with VISTA operating system. I can save ".VOB" files on the hard drive without any problems. However, after copying movie program (with no problem) and I insert a blank disk it says media copy unsuccessful. I have wasted 8-10 blanks so far. Has slysoft addressed this problem or is it me? :doh:

    flashnicky
     
  2. Charlie

    Charlie Well-Known Member

    Sounds like a media issue. What kind of media are you using?
     
  3. Webslinger

    Webslinger Retired Moderator

    Clonedvd works fine with Vista.

    To understand how to use Clonedvd properly, click http://forum.slysoft.com/showthread.php?t=476 and read fully

    If you're having problems, answer these questions:

    1)What blank media are you using? Specify a) brand name b)type (-R, +R, -RW, +RW, RAM, DL, etc.) c)media code, d) capacity/size, e) batch codes/serial codes (often found printed on the inner plastic hub of the blank disc), and f)country (factory information would be great as well, if possible) where the media was made (look on the physical packaging; do not rely on programs to accurately give you this information).

    If you don't know how to obtain media codes, you may find the following programs useful:

    http://dvd.identifier.cdfreaks.com and http://www.dvdinfopro.com/

    2) At what speed are you burning your blank media?

    3 ) Click the red fox icon in your system tray. Select "status" on the left hand side of your screen. With the problematic disc inserted in your computer, click the appropriate drive tab letter (the drive containing the disc) in Anydvd. In the window below the drive letter (just right click in the window and choose "select all" and then "copy"), copy and paste (right click, select "paste") the information into your next reply on these forums. If you made a backup, do this step for both the original disc and the backup, please.

    4 ) State the full a)error message(s) you encountered, b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s).

    5) a)Click the red fox icon on your toolbar.
    b) Navigate to "Program Settings".
    c) Click "enable logging".
    d) Click "ok".
    e) Put the original disc in your optical drive/reader.
    f) Go to your My Documents folder
    g) You will see a zip file called "Anydvd_Info_titleofmydisc.zip"
    h) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG]
    i) if you don't see that icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    j) a small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    k) click the "Browse" button, and locate and select the .zip file you created.
    l) click "upload"