unable to backup Cruel world

Discussion in 'AnyDVD HD (DVD issues)' started by delheat, Apr 8, 2008.

  1. delheat

    delheat Member

    It stars Edward furlong and that hottie Jamie Pressley ! Needs an update i presume ?
     
  2. Charlie

    Charlie Well-Known Member

    I don't know can you upload the anydvd info log please?
     
  3. Charlie

    Charlie Well-Known Member

    This movie does only contain CSS nothing special ripping fine right now with the anydvd ripper.
     
  4. oldjoe

    oldjoe Well-Known Member

    If you post your problem I'm sure someone will offer a solution.
     
  5. Charlie

    Charlie Well-Known Member

    Ripped just fine with the AnyDVD ripper.
     
  6. delheat

    delheat Member

    So i dont use clone dvd to rip this ? What should i use because thats all i have ?
     
  7. Charlie

    Charlie Well-Known Member

    Anydvd just rips and decrypts it doesn't burn. Use DVD Shrink if you want as it is free but you'll need Nero or Imgburn to burn. But the best to do it both is try out CloneDVD2 and as it is better at ripping with anyDVD most of the time.
     
  8. James

    James Redfox Development Team Staff Member

    Yes, you use CloneDVD, why shouldn't you?
     
  9. Webslinger

    Webslinger Retired Moderator

    1. Use Anydvd 6.4.0.7 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6407.exe

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

    click http://forum.slysoft.com/showthread.php?t=3992 and read fully

    You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.


    4. Use Clonedvd 2.9.1.6 beta: click http://sandbox.slysoft.com/beta/SetupCloneDVD2916.exe

    5. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327


    6. If you still have problems, then . . .

    A)
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG] (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"
    n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    C) Click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered
     
  10. Charlie

    Charlie Well-Known Member

    Summary for drive G: (AnyDVD 6.4.0.7)
    TSSTCORP CDDVDW SH-S203N SB01 0822
    Drive (Hardware) Region: free

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 1
    Total size: 1784528 sectors (3485 MBytes)

    Video DVD (or CD) label: CRUEL_WORLD
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1!

    RCE protection not found.
    Structural copy protection not found.
    Autorun not found on Video DVD.
    Bad sector protection not found.
    Emulating RPC-2 drive with region 1!
     
  11. delheat

    delheat Member

    still not working :(
     
  12. Webslinger

    Webslinger Retired Moderator

    Still can't help you if you don't provide requested information

    Anydvd handles that title perfectly fine
     
  13. delheat

    delheat Member

    ok everything is up to date and it stilll says that it is copy protected.
     
  14. Charlie

    Charlie Well-Known Member

    Read the quote above yours it requires you to do something and upload it here. We can't help if you won't help us to help you.
     
  15. delheat

    delheat Member

    It appears to be working fine !:) Now about that reservation road thing ;)
     
  16. delheat

    delheat Member

    Here is the upload for cruel world, it gave me problems and i was not able to back it up
     

    Attached Files:

  17. Charlie

    Charlie Well-Known Member

    Drive (Hardware) Region: 0 (not set!) set the region.

    Intervideo.dll not sure if that is a good thing or bad.
     
  18. delheat

    delheat Member

    so how do i set the drive ? sorry to be a pest !
     
  19. Webslinger

    Webslinger Retired Moderator

    You're not using Anydvd 6.4.0.7; you haven't posted a full error message; you haven't described what you were doing when you received an error message; you haven't stated what program gave you the error message nor the version number; you quite simply haven't followed the instructions that were posted.


    I'll post instructions again. This time if you don't follow the instructions completely in the order that they are listed, then I'm sorry, but I can't help you; and I sincerely doubt anyone else will be able to help you properly either until you start providing full error messages or describing your problem in detail. Otherwise, we're just guessing, and I sincerely doubt that anyone here is a mind reader.

    1.
    Typically that's installed by Pinnacle Studio (and possibly Windvd)

    James, the developer of Anydvd, says that filter can cause problems: click http://forum.slysoft.com/showpost.php?p=36523&postcount=9

    i) Create a backup of your registry
    ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)
    iii) Go to Tools > Filter Driver Load Order. Select "Iviaspi". Click "Remove Selected filter". Click "ok".
    iv) Reboot


    2.
    i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select the region that you're in
    viii. Start Anydvd

    3. Use Anydvd 6.4.0.7 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6407.exe

    You may need to reboot after installing if prompted to do so.

    4. Click the red fox icon on your toolbar. Click "default". Click "ok".

    5. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

    click http://forum.slysoft.com/showthread.php?t=3992 and read fully

    You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.


    6. Use Clonedvd 2.9.1.6 beta: click http://sandbox.slysoft.com/beta/SetupCloneDVD2916.exe

    7. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327


    8. If you still have problems, then . . .

    A)
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG] (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"
    n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    C) Click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered
     
    Last edited: Apr 9, 2008
  20. delheat

    delheat Member

    ok here is the attachment with anydvd beta , it states that it is copy protected therefore t cant be backed up. It workrd for me once last night but it stopped with 45 seconds remaining .
     

    Attached Files: