Trying to copy Chrysler Navigation DVD

[gbp]

I've tried to copy the Chrysler Nav DVD using Verbatim DVD +R DL disks.
I'm using ImbBurn, CloneCD & AnyDVD.
I set the Booktype to dvd-rom.
I've burnt 2 disks without success. Below is the info I get from AnyDVD----#1 is the original DVD. #2 & #3 are copies.The thing I notice is that the original is Parallel layers, whereas, the copies are Opposite layers.
That may be the problem???? How do I change that?

#1
Summary for drive F: (AnyDVD 6.5.4.9)
SONY DVD RW DRU-190A 1.65 2008/01/23 11:24
Drive (Hardware) Region: 0 (not set!)

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (parallel)

Total size: 3980987 sectors (7775 MBytes)




#2
Summary for drive F: (AnyDVD 6.5.4.9)
SONY DVD RW DRU-190A 1.65 2008/01/23 11:24
Drive (Hardware) Region: 0 (not set!)

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2086912 sectors (4076 MBytes)
Total size: 3980992 sectors (7775 MBytes)



#3
Summary for drive F: (AnyDVD 6.5.4.9)
SONY DVD RW DRU-190A 1.65 2008/01/23 11:24
Drive (Hardware) Region: 0 (not set!)

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 1990496 sectors (3887 MBytes)
Total size: 3980992 sectors (7775 MBytes)

 

[Webslinger]

How do I change that?

You can't. And you may be completely out of luck here.

Drive (Hardware) Region: 0 (not set!)

1. Right click the fox on your toolbar. Exit Anydvd
2. Click start. Right click on "My computer"--->select "properties".
3. Click on the 'Hardware' tab--->click the 'device manager' button.
4. Open the dvd/cdrom branch---> right click on your optical drive
5. Click "properties".
6. You should have a region tab. From there you can select a region.
7. Select the region that you're in
8. Start Anydvd