trouble with "The First Purge"

Discussion in 'CloneDVD' started by Higgg, Oct 15, 2018.

  1. Higgg

    Higgg Member

    while writing with Clone dvd, error "clone1 TCE" stops write a 86%. Any ideas?
     
  2. whatever_gong82

    whatever_gong82 Well-Known Member

  3. James

    James Redfox Development Team Staff Member

    Please post an AnyDVD & a zipped CloneDVD logfile.
     
  4. Higgg

    Higgg Member

    here is what II saved
     

    Attached Files:

  5. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    And now read that first link again and post the anydvd logfile ;)
     
    whatever_gong82 likes this.
  6. Higgg

    Higgg Member

     
  7. Ch3vr0n

    Ch3vr0n Translator NL & Mod

    And now read that first link again an provide anydvd logfile. The file you provided is the Clonedvd logfile, James requested BOTH.
     
  8. Higgg

    Higgg Member

    10-4
     

    Attached Files:

  9. James

    James Redfox Development Team Staff Member

    Decryption has failed. Please post an AnyDVD logfile.
     
  10. Higgg

    Higgg Member

    10-4
     

    Attached Files:

  11. James

    James Redfox Development Team Staff Member

    You just posted the CSS keys. Please post an AnyDVD logfile (it has the .ziplog file extension)

    Ensure Anydvd is running.
    1. Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
    2. Right click the red fox icon on your system tray (to the lower right).
    3. Select "Create Logfile"
    4. Wait for Anydvd to create a log file. In some circumstances this might take 5 minutes or longer.
    5. A pop-up screen will appear. Take note of the location where Anydvd created the logfile "Anydvd_Info_<xxxxxxx>.ziplog" (or something similar)
    6. Click "ok". A Windows Explorer will open. You will see a zip file called "Anydvd_Info_titleofmydisc.ziplog"
    7. Click "Create new topic" on the top or bottom right of a forum section.
    8. Describe the problem
    9. Below the text box you will see 3 buttons. Click the middle one that states "Upload File".
    10. A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the RedFox forums)
    11. Click the "Browse" button, and locate and select the .ziplog file you created.
    12. Wait for the progress indicator in the top right corner to finish. Then click "Close"
    13. When you submit reply, or submit a new thread, the .ziplog file will be attached automatically for us to take a look at.
     
  12. Higgg

    Higgg Member

    ok. problem writing "the first purge". actually, the problem is when clone is creating dvd files
     

    Attached Files:

    Last edited: Oct 15, 2018
  13. James

    James Redfox Development Team Staff Member

    Thank you.
    The CloneDVD log indicates, that there might be a problem with incorrectly decrypted sectors.
    The AnyDVD log indicates, that decryption went smoothly and everything is fine.
    In other words, I have no idea, what went wrong.

    To rule out 3rd party drivers interfering, or defective hardware: Do you have similar problems with other discs?

    If not, you can try to set AI scanner to "always enabled" in AnyDVD settings for this disc.
     
  14. Higgg

    Higgg Member

     
  15. Higgg

    Higgg Member

    never had this problem before. thanks for the time you took on this.
     
  16. James

    James Redfox Development Team Staff Member

    You can try to set AI scanner to "always enabled" and to enable "CSS Mastering Errors" in AnyDVD settings for this disc.