Still Unable to backup Reservation Road

Discussion in 'AnyDVD HD (DVD issues)' started by ediaw7247, Apr 28, 2008.

Thread Status:
Not open for further replies.
  1. ediaw7247

    ediaw7247 Member

    I have tried to backup my copy of Reservation Road that I have already had replaced because I was told it was a bad disc & still same issue. I have tried using shrink - Failed to read disk. I have backed it up to hdd with anydvd and it won't even play i get "Unable to read part of a file on the DVD, Playback may be affected" when trying to play it. Can someone please help????:bang:
     
    Last edited: Apr 28, 2008
  2. Charlie

    Charlie Well-Known Member

    Drive (Hardware) Region: 0 (not set!)

    1. Right click the fox on your toolbar. Exit Anydvd
    2. Click start. Right click on "My computer"--->select "properties".
    3. Click on the 'Hardware' tab--->click the 'device manager' button.
    4. Open the dvd/cdrom branch---> right click on your optical drive
    5. Click "properties".
    6. You should have a region tab. From there you can select a region.
    7. Select the applicable region
    8. Start Anydvd

    This should fix you up.
     
  3. ediaw7247

    ediaw7247 Member

    Charlie, I just checked: it is set at region 1
     
  4. Charlie

    Charlie Well-Known Member

    What I found was in your log so I think not if you think it is re-upload the new anydvd log file. This log doesn't lie. I'll gladly relook at it for you again.
     
  5. ediaw7247

    ediaw7247 Member

    I checked again to make sure and it did show the dvd/rw drive wasn't set. I set it and tried again - same issue. Sorry for my mistake on my last response.
     
  6. Charlie

    Charlie Well-Known Member

    No problem just do as I asked and it should work for some reason this title has to have the region set unless using hacked firmware to make a drive region free.
     
  7. ediaw7247

    ediaw7247 Member

    Charlie, when you say do it again, do you mean use anydvd to rip to hdd? the reason i ask is because i used my dvd-rom drive before to do it and it was set at region 1 before. or did you want me to try another way?
     
  8. Charlie

    Charlie Well-Known Member

    No do the quote below per step as it is needed then try to rip again.

    Quoted what to do for you again. :)
     
  9. ediaw7247

    ediaw7247 Member

    I understand that, I already have both drives set to region 1. The burn part is what I was inquiring about. Which way should I try to burn it?
     
  10. Charlie

    Charlie Well-Known Member

    Use your favorite app of your choice to burn. If using DVD Shrink I suggest ripping to the hard drive first as there is structural copy protection and DVD Shrink can't rip these discs. CloneDVD is fine and I think CloneCD still needs an update for this title.
     
    Last edited: Apr 28, 2008
  11. DrinkLyeAndDie

    DrinkLyeAndDie Retired Moderator

    Please create and post a new log file for this disc after changing the region setting for your drive. Since you have already changed the setting all you need to do is create a new set of log files using the original disc.

    After having changed the region setting you will have re-rip the original disc. When the region is not set for the drive AnyDVD isn't able to obtain all the titlekeys for this disc.
     
  12. Webslinger

    Webslinger Retired Moderator

    In addition to what Drinklyeanddie wrote . . .

    1. Use Anydvd 6.4.1.2: click http://static.slysoft.com/SetupAnyDVD6412.exe

    You may need to reboot after installing if prompted to do so.

    2. Click the red fox icon on your toolbar. Click "default". Click "ok".

    3. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

    click http://forum.slysoft.com/showthread.php?t=3992 and read fully

    You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.


    4. Use Clonedvd 2.9.1.7: click http://static.slysoft.com/SetupCloneDVD2917.exe

    5. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

    If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327


    6. If you still have problems, then . . .

    A)
    a) Ensure Anydvd is running.
    b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
    c) Right click the red fox icon on your toolbar.
    d) Select "Create Logfile"
    e) Wait for Anydvd to create a log file.
    f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
    g) Go to your My Documents folder
    h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
    i) When replying or posting in the Slysoft forums, look for the icon that looks like [​IMG] (in other words, look for the paperclip after clicking "quote" or when creating a new thread)
    j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
    k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
    l) Click the "Browse" button, and locate and select the .zip file you created.
    m) click "upload"
    n) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


    B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


    C) Click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered
     
    Last edited: Apr 28, 2008
  13. ediaw7247

    ediaw7247 Member

    It's not working Charlie. It copies to drive, but I cannot view the movie from there I get the same message from original post, when i try and use shrink - & click on preview while it is analyzing - green or distorted image & it shows as 7447MB. Any suggestions?
     
  14. Charlie

    Charlie Well-Known Member

    You have to right click on the anydvd in the taskbar and select rip to the hard drive when that is done take out the disc then open shrink direct it to the recently ripped folder to process and shrink.
     
  15. ediaw7247

    ediaw7247 Member

    Here is the log file as requested (after a reboot)
     

    Attached Files:

  16. Webslinger

    Webslinger Retired Moderator

    Your drive's region code still isn't set.

    1. Right click the fox on your toolbar. Exit Anydvd
    2. Click start. Right click on "My computer"--->select "properties".
    3. Click on the 'Hardware' tab--->click the 'device manager' button.
    4. Open the dvd/cdrom branch---> right click on your optical drive
    5. Click "properties".
    6. You should have a region tab. From there you can select a region.
    7. Select the region that you're in
    8. Run Anydvd
     
  17. Webslinger

    Webslinger Retired Moderator

    No. You haven't.
     
  18. DrinkLyeAndDie

    DrinkLyeAndDie Retired Moderator

    ediaw7247, make sure you exit AnyDVD before setting the region!
     
  19. ediaw7247

    ediaw7247 Member

    When using shrink to copy back on hdd created by anydvd I get these:
     

    Attached Files:

  20. Charlie

    Charlie Well-Known Member

    Cause your region drive isn't region free nor set to region one these errors will continue till AnyDVD says the region is set. If you follow my or even webslingers post to set your region this title is a walk through the park.
     
Thread Status:
Not open for further replies.