[ Solved ]AnyStream 1.1.5.0 - [GUI not showing up]

Discussion in 'AnyStream' started by florian78, Jun 5, 2021.

  1. Vzxy

    Vzxy Well-Known Member

    reinstalling on top of the exiting installation didn't work for me. I had to remove the existing VC redistributable and reinstall AS which installed it again for me. It would very likely be these two since AS installs 2017 specifically.

    upload_2021-6-7_13-2-40.png
     
  2. florian78

    florian78 Active Member

    I tried it. Didn't work.
     
  3. RedFox 1

    RedFox 1 Super Moderator

    Have you tried the version 1151 ,only in 64bit for now.
     
  4. RedFox 1

    RedFox 1 Super Moderator

    Please leave a log file for the developers. Look at the GUI you will see FILE, Press it come on you will see create log file, create it, upload that to the forum
     
  5. florian78

    florian78 Active Member

    what do you mean with turning off "VPN and use it normally"?
    My machine is on Windows 64 Bit.
     
  6. florian78

    florian78 Active Member

    well, I would look at the GUI...but the whole thread is about that the GUI is not showing up... <-- so it will be pretty hard for me to look at the GUI and press anything...
     
  7. RedFox 1

    RedFox 1 Super Moderator

    Then you will have to wait for the developers to help you I cannot help you anymore I am sorry for your problems
     
  8. Pete

    Pete Forum Admin Staff Member

    Again: have you tried version 1.1.5.1?
    That contains a specific fix, made especially for you. And I'm fairly certain that it should fix your problem.
     
  9. florian78

    florian78 Active Member

    yes, I have tried the version 1.1.5.1 and unfortunatley the GUI doesn't show up.
    I just downloaded the latest beta version in 64 Bit.
    Do you need another dump file? here is the latest dump with version 1.1.5.1 : https://obergaenserndorf.at/AnyStream-Dump-1151.zip

    Br, Florian
     
  10. florian78

    florian78 Active Member

    I tried the new version on a fresh install within a virtual machine. works fine.
    So there must be a kind of misconfiguration on my host system. would be fine if this issue can be solved even though...because I don't want to use always the virtual machine for this.
     
  11. RedFox 1

    RedFox 1 Super Moderator

    well, congratulations Florian78, the good news is always welcome news. ;)
     
  12. cartman0208

    cartman0208 Well-Known Member

    You should rather find and remove the misconfiguration on your system.
    If you can't find it yourself, you probably can imagine how hard it is for a developer to find a fix for something unknown.

    A (lacking) comparison would be: your new car doesn't fit in your garage and you want the manufacturer of the car to rebuild it to make it fit without knowing the layout of the garage o_O
     
  13. florian78

    florian78 Active Member

    well, I would agree but in this case i just installed the new version and suddenly it didn't show up the GUI....so what is now faulty? There was no other application installed. Weird isn't it.
    In my opinion it isn't really solved.
    Imagine: the only change was installing the new AS version. and now the customer should find out why it's not running anymore... ;-)

    If all else failes...I will just start the virtual machine. Maybe the Virtual Machine is anyway the best environment for Anystream...because when anything failes...I just go back to the starting point.
     
  14. cartman0208

    cartman0208 Well-Known Member

    Valid point ... but you installed the last working version, which then wasn't working either.
    So something must have changed in the meantime on your system, that you most likely didn't notice ...
    Another Point: for many (all?) other users the program works ok.
    If I had that kind of issue, and everything I tried was failed, and I REALLY need the program to run, I'd reset my OS ... Windows 10 has a nice button for that in Settings > Update and Security > Restore
    OR you use a VM ;)
     
  15. florian78

    florian78 Active Member

    that's the reason why I just installed the VM...because all my other applications just run fine...so no need to go for a reinstall of the entire host.
     
  16. RedFox 1

    RedFox 1 Super Moderator

    I agree with you Florian78. Now just enjoy the program, it's time to build your collection.