skipping freezing discs!

Discussion in 'CloneDVD' started by bemana, Aug 13, 2007.

  1. bemana

    bemana Member

    I've used anydvd for a year now and use taiyo yuden discs - lately my damn discs record fine, and of course I'm checking my original for flaws, yet the recorded version plays a bit then skips all over the place! I've read/done all the generic blame the burner/everything but anydvd stuff (firmware, media, etc) to no avail. please help, I'm tired of wasting money on discs!
     
  2. DetroitBaseball

    DetroitBaseball Well-Known Member

  3. bemana

    bemana Member

    reply

    I'm using the newest anydvd 6.1.7 - lite one lh-18a1p updated firmware, both the host and zodiac copied great software wise but the disc skipped after a bit
     
  4. Webslinger

    Webslinger Retired Moderator

    As anydvd doesn't burn, this issue has nothing to do with Anydvd.

    1. What program are you using to burn and what version number?

    2. a) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)

    b) Go to Tools > Filter Driver Load Order. Click "Clipboard". Then paste the information you pasted into your clipboard into your next post (ctrl-v).

    If your backups worked previously, it sounds to me as though your burner is dying.
     
    Last edited: Aug 13, 2007
  5. DetroitBaseball

    DetroitBaseball Well-Known Member

    Please answer all applicable questions. It most likely isn't even AnyDVD's fault.
     
  6. bemana

    bemana Member

    what other info?

    i use clone for the actual copy? i've listed my parameters, the dics impacted amongst others? tell me what else is necessary?
     
  7. bemana

    bemana Member

    also this is my 2nd burner, 1 month old

    i doubt thats the issue given the copy prob is intermittent rather than consistent (i.e. hardware related)
     
  8. DetroitBaseball

    DetroitBaseball Well-Known Member

  9. DetroitBaseball

    DetroitBaseball Well-Known Member

    AnyDVD is not the issue since AnyDVD doesn't burn.
     
  10. bemana

    bemana Member

    i use clone for copying

    #2 - done
    anydvd 6.1.70
     
  11. bemana

    bemana Member

    i use xp - all firmware updated

    movies the host and zodiac - off the top of my head blood diamond was similar - all updated
     
  12. DetroitBaseball

    DetroitBaseball Well-Known Member

    You didn't state the version of the program you are using to copy the movies. :confused:
     
  13. DetroitBaseball

    DetroitBaseball Well-Known Member

    Do not make a new post to answer each question please.
     
  14. RedFox 1

    RedFox 1 Super Moderator

    None of those movies posed a problem in any way. Try some new media and burn at 8X or 4X.:agree:
     
  15. bemana

    bemana Member

    clone dvd 2.9.1.1

    .............
     
  16. bemana

    bemana Member

    ...

    i'm using taiyo yuden (which i learned to use here), burned at 8x only, using all anydvd and clone dvd - i shouldn't have any problems eh? always update all recommended things - your typical good customer paying attention to the frequently asked questions etc before bothering ya'll, but the cop outs? i doubt i am the only one and it's a problem other than the software as I've long since followed all the recommended practices in copying and media choices? please help?
     
  17. DetroitBaseball

    DetroitBaseball Well-Known Member

    No one here is a mind reader. You need to answer my questions.
     
  18. Webslinger

    Webslinger Retired Moderator

    1) Update to Clonedvd 2.9.1.2; you're using 2.9.1.1

    2. a) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
    (it's also an excellent program imo)

    b) Go to Tools > Filter Driver Load Order. Click "Clipboard". Then paste the information you pasted into your clipboard into your next post (ctrl-v).

    Moving this thread to the Clonedvd forum . . .
     
    Last edited: Aug 13, 2007
  19. bemana

    bemana Member

    i'm sorry, which questions have I missed?

    ....................
     
  20. DetroitBaseball

    DetroitBaseball Well-Known Member

    That doesn't help anyone.