saw 4

[bobliff]

here are ifo's for saw 4

also ifo's for already dead

 

[Webslinger]

here are ifo's for saw 4

Thanks, but not needed. This is a known issue.
You can use Clonedvd and simply unselect title 25.

also ifo's for already dead

Thanks. But why?

 

[Webslinger]

Follow the steps, please (in order):

1. Use Anydvd 6.3.0.9 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6309.exe

You may need to reboot after installing if prompted to do so.

2. Click the red fox icon on your toolbar. Click "default". Click "ok".

3. Use the latest Clonedvd beta: click
http://forum.slysoft.com/showpost.php?p=83249&postcount=1

4. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

Important: Uncheck or unselect title 25 with Saw IV

5. If you still have problems, then . . .

A) a) Ensure Anydvd is running.
b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
c) Right click the red fox icon on your toolbar.
d) Select "Create Logfile"
e) Wait for Anydvd to create a log file.
f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
g) Go to your My Documents folder
h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
i) When replying or posting in the Slysoft forums, look for the icon that looks like

j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
l) Click the "Browse" button, and locate and select the .zip file you created.
m) click "upload"


B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?

 

[noodles01]

Hi folks has anyone had trouble with saw 4.I keep gettiing the message " data error(cyclic redundancy check). The details says that the disc is dirty..buthe disc is BRAND new and this isn't the first saw move this has happened with saw 3 was the same.:doh:

 

[DrinkLyeAndDie]

Hi folks has anyone had trouble with saw 4.I keep gettiing the message " data error(cyclic redundancy check). The details says that the disc is dirty..buthe disc is BRAND new and this isn't the first saw move this has happened with saw 3 was the same.:doh:

More information would be useful. What software are you using? What version of AnyDVD are you using? Generally the redundancy check errors mean the disc is bad but there are some other things you should check out first.

Please read this thread about Saw IV.

Make sure you update to AnyDVD 6.3.0.9 beta which you can find here. Currently you cannot use the AnyDVD ripper on this disc however if you use the latest CloneDVD release (2.9.1.4 beta) that you can find here you can make a working backup if you exclude Title 25 from the backup.

 

[noodles01]

saw 4..

oops sorry i am using 6.3.9 version of anydvd on my windows xp and also clonedvd2 which is where i burn the disk from.

 

[Webslinger]

oops sorry i am using 6.3.9 version of anydvd on my windows xp and also clonedvd2 which is where i burn the disk from.

You need to remove title 25 in Clonedvd 2.9.1.4. If that doesn't work you have a bad original disc even if it plays fine.

 

[noodles01]

here is the log for the movie

 

[Charlie]

here is the log for the movie

Summary for drive D: (AnyDVD 6.3.0.3)
HL-DT-ST DVD-ROM GDR8160B 0009 0BICA01/10/05
Drive (Hardware) Region: 1

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2084960 sectors (4072 MBytes)
Total size: 4148352 sectors (8102 MBytes)

Video DVD (or CD) label: Saw_IV
Media is CSS protected!
Video Standard: NTSC
Media is locked to region(s): 1!

RCE protection not found.
Found & removed structural copy protection!
Found & removed bogus title set(s)!
Changed firstplay: Jump directly to Title 25!
UDF filesystem patched!
Autorun not found on Video DVD.
Found & removed 5 potential bad sector protections!
Emulating RPC-2 drive with region 1!

Again you need anydvd 6.3.0.9 http://sandbox.slysoft.com/beta/SetupAnyDVD6309.exe

And CloneDVD2 2.9.1.4 http://sandbox.slysoft.com/beta/SetupCloneDVD2914.exe

The latest version of AnyDVD is 6.3.0.9 beta. At present the AnyDVD ripper cannot rip this disc. I'm sure this will be resolved soon. For the time being it has been reported by another user if you use CloneDVD and deselect Title 25 you should be able to make a working backup.

Your Filters are fine.

 

[Webslinger]

Please provide Saw IV (rated version) info

Please provide the info from steps 4 and 5. Follow the steps. Thank you:

1. Use Anydvd 6.3.1.0 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6310.exe

You may need to reboot after installing if prompted to do so.

2. Click the red fox icon on your toolbar. Click "default". Click "ok".

3. Right click the red fox icon, and select "rip video dvd to harddisk." Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want.

4.
A) a) Ensure Anydvd is running.
b) Put the problematic original disc in your optical drive/reader. Wait for Anydvd to scan the disc.
c) Right click the red fox icon on your toolbar.
d) Select "Create Logfile"
e) Wait for Anydvd to create a log file.
f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
g) Go to your My Documents folder
h) You will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
i) When replying or posting in the Slysoft forums, look for the icon that looks like

j) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
k) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
l) Click the "Browse" button, and locate and select the .zip file you created.
m) click "upload"


5) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?

 

[WyattEarpp]

saw 4 info wont burn hope i helped

this is info for saw 4 hope i done it correct 1st time doing this

 

[WyattEarpp]

not rated version

guess i should have read a little further u wanted rated i gave u the unrated any way maybe it will help

 

[Webslinger]

this is info for saw 4 hope i done it correct 1st time doing this

Thank you, but I'd like

1) An error message if you received one from Anydvd ripper (see step 3 and step 5). If you get an error message during step 3, please provide the full error message. Thank you

2) the .zip from the rated version of this film

 

[Webslinger]

guess i should have read a little further u wanted rated i gave u the unrated any way maybe it will help

It will if you do steps 3 and 5 please.

 

[noodles01]

saw4

thank you very much for your help..installed upgrades and unchecked file 25 worked just fine!!! I really appreciate your help as I am not that computer savvy.It's really nice to know that I can come here for help

noodles

 

[WyattEarpp]

sorry

sorry webslinger but i loned out my saw 4 dvd after i couldn't make a copy to my brother in law #1 reason 4 making copies so my dvd dont get lost and scratched up didn't work this time though

 

[James]

sorry webslinger but i loned out my saw 4 dvd after i couldn't make a copy to my brother in law #1 reason 4 making copies so my dvd dont get lost and scratched up didn't work this time though

Don't worry, I believe I have all the SAW4 files I need.

 

[Charlie]

Yep I am running out and getting it as well.

 

[Webslinger]

Don't worry, I believe I have all the SAW4 files I need.

O.k., I'm going to unsticky this thread then.

 

[Shores]

i had the same issue. i had even taken my first disc back and got another one. thanks for the tip.