[Resolved] bangkok dangerous/babylon A.D

[prarce2]

when i tried to burn these i had problems with clone dvd getting to 100% on the copying but when it comes to writing it would only getting to like 27% and then stop and say the media was messed up i put new media the same problems with that one too. thats both movies too.

 

[mike_r]

you need to post a log file from anydvd so the experts can have a look at your system (DVD firmware, drivers etc). Please post the entire zip file, check the FAQs if it's unclear.

secondly you'll need to tell us what media you're using (probably not top end if it's making coasters), and the first suggestion will be to try reducing burn speed.

 

[bbamx68]

Slow down the burn

I was having all kinds of trouble with both full rip and movie only.What I finally tried was slowing down the speed from 20x/18x to 8x and it burned the entire dvd right thru.I'm running two plextor drives ones a 20x and the other is 18x....Couldnt get past 67% full burn at 18/20x and movie only couldnt get past 97%....Good luck

 

[prarce2]

ummary for drive F: (AnyDVD 6.5.1.1)
TSSTCORP CD/DVDW SH-S183L SB03 1214
Drive (Hardware) Region: 1

Media is a DVD.
Booktype: dvd-rom (version 1), Layers: 2 (opposite)
Size of first Layer: 2084960 sectors (4072 MBytes)
Total size: 4169920 sectors (8144 MBytes)

Video DVD (or CD) label: Bangkok_Dangerous
Media is CSS protected!
Video Standard: NTSC
Media is locked to region(s): 1!

RCE protection not found.
Found & removed structural copy protection!
Found & removed invalid cell pieces!
Found & removed bogus title set(s)!
Found & removed invalid program from program chain!
UDF filesystem patched!
Autorun not found on Video DVD.
Found & removed 9 potential bad sector protections!
Emulating RPC-2 drive with region 1!

 

[Webslinger]

1. Use Anydvd 6.5.1.4 beta: click http://sandbox.slysoft.com/beta/SetupAnyDVD6514.exe


You may need to reboot after installing if prompted to do so.

2. Click the red fox icon on your toolbar. Click "default". Click "ok".

3. If you use DVDShrink, Nero Recode, or programs that generally can't handle structural protections, right-click on the fox icon on your toolbar, and select "Rip video-dvd to Hard Disk". Choose your source and destination paths. Click "Copy", and wait for Anydvd ripper to finish. You can then import that rip into whatever program you want. This is an important step if the original disc contains structural protection.

click http://forum.slysoft.com/showthread.php?t=3992 and read fully

You don't need to do this if you own Clonedvd or are planning to make a backup with Clonecd.


4. Use Clonedvd 2.9.2.0: click http://static.slysoft.com/SetupCloneDVD2920.exe

5. Follow the steps from this link in order: click http://forum.slysoft.com/showthread.php?t=476 (follow them step by step)

If you're using +R DL blank discs, I recommend using Clonecd: click http://forum.slysoft.com/showthread.php?t=327


6. If you still have problems, then . . .

A)
a) Ensure Anydvd is running.
b) Put the problematic original movie dvd in your burner. Wait for Anydvd to scan the disc.
c) Right click the red fox icon on your toolbar.
d) Select "Create Logfile"
e) Wait for Anydvd to create a log file.
f) A pop-up screen will appear. Take note of the location where Anydvd created the logfile and the logfile's name. Click "ok".
g) Windows Explorer will open, and you will see a zip file called "Anydvd_Info_titleofmydisc.zip" (or something similar; see step f)
h) When replying or posting in the Slysoft forums, look for the icon that looks like

(in other words, look for the paperclip after clicking "quote" or when creating a new thread)
i) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
j) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
k) Click the "Browse" button, and locate and select the .zip file you created.
l) click "upload"
m) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at


B) State the full a)error message(s) you encountered (click "details"), b)tell us what program(s) you were using when you received the error message(s), and c) describe in detail what you were doing when you received the error message(s). What problem are you having exactly?


C) Click http://forum.slysoft.com/showthread.php?t=5091 to see if your question has already been answered

D) Provide the Clonedvd log file after Clonedvd has finished--or after you receive an error message.

i)In the white area under the tab labelled "Log", right click and select "save as".
ii)Select where you want to save the log, and then save it.
iii) The log will be a .txt file. Zip it up using Winzip or another program. If the text file is small enough, you should be able to upload it anyway. Otherwise, use Winzip.
iv) When replying or posting in the Slysoft forums, look for the icon that looks like

(in other words, look for the paperclip after clicking "quote" or when creating a new thread)
v) If you don't see that paperclip icon, click the "go advanced" button. You should see that icon now. Click the paperclip.
vi) A small pop-up screen should appear (if it doesn't please ensure your browser is enabled to allow pop-ups from the Slysoft forums)
vii) Click the "Browse" button, and locate and select the .zip file (or .txt file) that you created.
viii) click "upload"
ix) Close the window. When you submit reply, or submit a new thread, the .zip file will be attached automatically for us to take a look at

 

[prarce2]

i am using memorex -R

 

[Webslinger]

i am using memorex -R

Avoid


Bad quality blank media can vary in results from disc to disc, even within the same spindle. With good blank media you can play "find the bad blank" game. With inferior quality blank media you get to play "find the blank that works" game. And even when inferior blank media does work, you can play the "will my backups still play after 6 months (or even after two years)" game.

Use good quality blank media (Taiyo Yuden Premium, Verbatim Datalife Plus, Maxell Plus, Maxell Broadcast Quality). Avoid Ritek, Memorex, Regular Maxell blank media that you can find in most stores that are not made in Japan, Fuji, TDK from Costco, and Princo. Also, on average, it's wise to avoid blank media that's made in China or Hong Kong.

If you're using double layer blank media, use Verbatim +R DL (preferably made in Singapore) or MAM-A 8x +R DL.


And do what I wrote above, please, if you want help.

 

[prarce2]

here's anydvd log and i did everthing you said above websling, still no joy.

 

[Webslinger]

DRVMCDB (System32\Drivers\DRVMCDB.SYS), Version: 3.30.18.0 (1.0.0.1)
Company: Sonic Solutions
Copyright: Copyright © Sonic Solutions
Description: Device Driver
FileVersion: 3.30.18a

DLACDBHM (System32\Drivers\DLACDBHM.SYS), Version: 5.20.3.0 (1.0.0.1)
Company: Sonic Solutions
Copyright: Copyright © 2004 Sonic Solutions
Description: Shared Driver Component
FileVersion: 5.20.03a

You have Sonic/Roxio's Drive Letter Access packet writing crap on your system, which may cause conflicts with Anydvd and other programs. If you need to drag and drop files to burn (as you would to a floppy disc), then use dvd-ram instead, which is more stable. That Drive Letter Access nonsense needs to be removed.

1.
i) Create a backup of your registry: click http://support.microsoft.com/kb/322756
ii) Download imgburn. It's a free program: http://www.imgburn.com/index.php?act=download
(it's also an excellent program imo)
iii) Go to Tools > Filter Driver Load Order. Select "DRVMCDB". Click "Remove Selected Filter". Select "DLACDBHM". Click "Remove Selected Filter". Click "ok".
iv) Reboot

Keep in mind that whatever program installed those filters will no longer function properly.

2. I need full error message (click "details").

3. Create a new Anydvd .zip log file and upload it.

 

[prarce2]

webslinger, the last bit of information you wrote worked good. but i have a question why if i had these programs for the whole time i had any&clone dvd and it was never a problem but now it is? well no matter at least it works now!

 

[Webslinger]

webslinger, the last bit of information you wrote worked good. but i have a question why if i had these programs for the whole time i had any&clone dvd and it was never a problem but now it is?

Clonedvd has been updated, and packet writing software, in general, can cause a lot of quirky issues

By the way, update to Anydvd 6.5.1.8, if you haven't already.