Region 0 and can't set the region?

Discussion in 'AnyDVD HD (DVD issues)' started by Charlie, Dec 24, 2007.

  1. Charlie

    Charlie Well-Known Member

    OK I have turned anydvd hd off and rebooted the PC only to try to play this DVD so the region on the drive is set but always fails for some reason. I get this in windows media player :

    [​IMG]

    I thought I already set the region but apparently not. I went into properties on this drive and it states region 1 but the anydvd info window states region 0 region not set.

    Summary for drive E: (AnyDVD 6.3.0.3)
    HL-DT-ST DVD-RAM GSA-H55L 1.03 07/08/17 7U02
    Drive (Hardware) Region: 0 (not set!)

    Media is a DVD.
    Booktype: dvd-rom (version 1), Layers: 2 (opposite)
    Size of first Layer: 2040304 sectors (3984 MBytes)
    Total size: 3886095 sectors (7590 MBytes)

    Video DVD (or CD) label: SC30NNW1
    Media is CSS protected!
    Video Standard: NTSC
    Media is locked to region(s): 1 4!

    Warning: .bup file location is wrong, .bup processing disabled!
    RCE protection not found.
    Structural copy protection not found.
    Autorun not found on Video DVD.
    Bad sector protection not found.
    Emulating RPC-2 drive with region 1!

    Am I missing something here? Should I just uninstall the drive in the device manager and reboot?
     
  2. Webslinger

    Webslinger Retired Moderator

    i. Right click the fox on your toolbar. Exit Anydvd
    ii. Click start. Right click on "My computer"--->select "properties".
    iii.Click on the 'Hardware' tab--->click the 'device manager' button.
    iv. Open the dvd/cdrom branch---> right click on your optical drive
    v. Click "properties".
    vi. You should have a region tab. From there you can select a region.
    vii. Select region 1
    viii. Start Anydvd
     
  3. Charlie

    Charlie Well-Known Member

    Thanks I was close but I clicked propertied on the icon under my computer thanks. It is set now.